BS 7971-10-2014 Protective clothing and equipment for use in violent situations and in training Coveralls Requirements and test methods《在暴乱场合和训练中使用的防护服及设备 连裤工作服 要求和试验方法》.pdf

《BS 7971-10-2014 Protective clothing and equipment for use in violent situations and in training Coveralls Requirements and test methods《在暴乱场合和训练中使用的防护服及设备 连裤工作服 要求和试验方法》.pdf》由会员分享，可在线阅读，更多相关《BS 7971-10-2014 Protective clothing and equipment for use in violent situations and in training Coveralls Requirements and test methods《在暴乱场合和训练中使用的防护服及设备 连裤工作服 要求和试验方法》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS 7971-10:2014Incorporating Corrigendum No.1Protective clothing andequipment for use in violentsituations and in trainingPart 10: Coveralls Requirementsand test methodsPublishing and copyright informationThe BSI copyright notice displayed in this document indicates when the

2、 documentwas last issued. The British Standards Institution 2015Published by BSI Standards Limited 2015ISBN 978 0 580 90314 4ICS 13.340.10The following BSI references relate to the work on this document:Committee reference PH/3/12Draft for comment 13/30287913 DCPublication historyFirst published Sep

3、tember 2004Second (present) edition, February 2014Amendments issued since publicationDate Text affectedJune 2015 C1. See ForewordBS 7971-10:2014 BRITISH STANDARDContentsForeword iiIntroduction 11 Scope 12 Normative references 13 Terms and definitions 24 Requirements 35 Test methods and method guidan

4、ce 86 Marking 117 Manufacturers information to users 11AnnexesAnnex A (informative) Rationale for removal of ergonomic evaluation 13Annex B (informative) Functional undergarments 13Bibliography 14Summary of pagesThis document comprises a front cover, an inside front cover, pages i to ii,pages 1 to 1

5、4, an inside back cover and a back cover.BRITISH STANDARD BS 7971-10:2014 The British Standards Institution 2015 iForewordPublishing informationThis part of BS 7971 is published by BSI Standards Limited, under licence fromThe British Standards Institution, and came into effect on 28 February 2014. I

6、twas prepared by Subcommittee PH/3/12, Protective clothing and equipment foruse in violent situations and training under the authority of TechnicalCommittee PH/3, Protective clothing. A list of organizations represented on thiscommittee can be obtained on request to its secretary.SupersessionThis Br

7、itish Standard supersedes BS 7971-10:2004, which is withdrawn.Information about this documentText introduced or altered by Corrigendum No.1 is indicated in the text by tags. Minor editorial corrections are not tagged.This British Standard has been substantially revised in association with the HomeOf

8、fice. The aims of the revision were to amalgamate appropriate content fromBS 7971-1, BS 7971-2 and BS 7971-10, together with content from the HomeOffice publication, Flame retardant overalls standard for UK police (2008) 1.This British Standard contains public sector information licensed under the O

9、penGovernment Licence v2.0.This is a full revision of the standard and introduces requirements covering: innocuousness; sizing; pre-treatment processes; marking; user information; cleaning; modified resistance to chemicals; repeated resistance to heat transmission on exposure to flame; testing for f

10、lame spread after exposure to chemicals.Ergonomics is not included. Annex A explains the rationale for this decision.Presentational conventionsThe provisions of this standard are presented in roman (i.e. upright) type. Itsrequirements are expressed in sentences in which the principal auxiliary verb

11、is“shall”.Commentary, explanation and general informative material is presented insmaller italic type, and does not constitute a normative element.Contractual and legal considerationsThis publication does not purport to include all the necessary provisions of acontract. Users are responsible for its

12、 correct application.Compliance with a British Standard cannot confer immunity from legalobligations.Attention is drawn to the following Directive: Personal Protective Equipment Directive (PPE), 89/686/EEC (as amended) 2.BRITISH STANDARDBS 7971-10:2014ii The British Standards Institution 2015Introdu

13、ctionCoveralls are used in specialist operational situations and in training to reducethe risk of injury to the user, who might be faced with threats such as heat,flame and the effects of certain liquids, which in some circumstances could alsobe burning liquids.Coveralls are intended to provide prot

14、ection for a limited period only. Theycover the whole body, excluding the head, hands and feet. A coverall isintended to be worn externally to other protective items, such as blunt traumaprotectors and body armour, base layer garments and duty clothing.In the period of time since the first publicati

15、on of the BS 7971 suite ofstandards, products in general use have evolved to reflect the changing threatand operational needs of the user. The Home Office publication, Flameretardant overalls standard for UK police (2008) 1, introduced additionaltesting methodology including the need for protection

16、from more penetrativechemical threats and repeated heat exposure. In the selection of coveralls,optimum protection has to be balanced with operational requirements in anenvironment where the option of increasing protection levels as a threatescalates might not be viable.Operational requirements were

17、 taken into account during the preparation ofthis revision, including an option for protection to be achieved by use ofcombined undergarment and outer layer systems, which has been included fromthe Home Office standard.NOTE As an aid to specifiers purchasing undergarments which do not fall into thed

18、efinition of “functional undergarment” in accordance with this standard, guidanceon suitable material and reference standards is given in Annex B.Principal changes between this and the previous edition are outlined in theForeword.1 ScopeThis British Standard specifies requirements and test methods f

19、or coveralls,which are to be used predominantly but not exclusively by police and prisonofficers in specialist operational situations and in training, and which areintended to provide protection against heat and flame and small volumes ofcertain liquids.It is applicable to single and two-piece garme

20、nts, single-layer garments,multi-layer garments and garment assemblies requiring use of a specificundergarment.This British Standard does not cover other protective features such aselectrostatic, cut or slash resistance.NOTE Civilian groups working alongside police or prison services in specialistop

21、erational situations might find by risk assessment that this standard offersadditional protection for such activities and threats not considered by otherstandards.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in thisdocument and are indispensable for

22、its application. For dated references, onlythe edition cited applies. For undated references, the latest edition of thereferenced document (including any amendments) applies.BS EN 530:2010, Abrasion resistance of protective clothing material TestmethodsBRITISH STANDARD BS 7971-10:2014 The British St

23、andards Institution 2015 1BS EN 702, Protective clothing Protection against heat and flame Testmethod: Determination of the contact heat transmission through protectiveclothing or its materialsBS EN 31092, Textiles Physiological effects Measurement of thermal andwater-vapour resistance under steady-

24、state conditions (sweatingguarded-hotplate test)BS EN ISO 105-B02:2013, Textiles Tests for colour fastness Part B02: Colourfastness to artificial light: Xenon arc fading lamp testBS EN ISO 105-C06:2010, Textiles Tests for colour fastness Part C06: Colourfastness to domestic and commercial laundering

25、BS EN ISO 105-E04:2013, Textiles Tests for colour fastness Part E04: Colourfastness to perspirationBS EN ISO 105-X12:2002, Textiles Tests for colour fastness Part X12: Colourfastness to rubbingBS EN ISO 5077, Textiles Determination of dimensional change in washing anddryingBS EN ISO 6330:2012, Texti

26、les Domestic washing and drying procedures fortextile testingBS EN ISO 6530, Protective clothing Protection against liquid chemicals Testmethod for resistance of materials to penetration by liquidsBS EN ISO 6942:2002, Protective clothing Protection against heat and fire Method of test: Evaluation of

27、 materials and material assemblies when exposedto a source of radiant heatBS EN ISO 13934-1, Textiles Tensile properties of fabrics Part 1: Determinationof maximum force and elongation at maximum force using the strip methodBS EN ISO 13935-1, Textiles Seam tensile properties of fabrics and made-upte

28、xtile articles Part 1: Determination of maximum force to seam rupture usingthe strip methodBS EN ISO 13937-4, Textiles Tear properties of fabrics Part 4: Determination oftear force of tongue-shaped test specimens (double tear test)BS EN ISO 15025:2002, Protective clothing Protection against heat and

29、 flame Method of test for limited flame spreadISO 9151, Protective clothing against heat and flame Determination of heattransmission on exposure to flame3 Terms and definitionsFor the purposes of this part of BS 7971, the following terms and definitionsapply.3.1 closure systemsystem for fastening op

30、enings in a coverallNOTE 1 A closure system can include several different closures used together tofasten an opening, for example a slide fastener covered by an overflap which isfastened down with a touch and close fastener.NOTE 2 A seam is not deemed to be a closure system.BRITISH STANDARDBS 7971-1

31、0:20142 The British Standards Institution 20153.2 coverallone-piece or two-piece outer garment providing protection to the upper andlower torso, neck, arms and legs, including the wrists and ankles, but excludingthe head, hands and feet; consisting of a single layer or multiple layers ofmaterial, or

32、 a system of inner and outer clothing3.3 functional undergarmentspecific undergarment intended to be worn with a specific coverall and whichforms part of the combined protective garment assembly3.4 hardwarenon-fabric items used in coveralls including items made of metal or plasticsNOTE Examples of h

33、ardware are press fasteners.3.5 interlininglayer of material between the innermost layer and the outer material in amulti-layer coverallNOTE An interlining can be used to provide a moisture barrier.3.6 outer materialoutermost material or layer of material of a coverall3.7 structural seamseam which,

34、if ruptured, would expose an undergarment, lining, interlining orinner layer, or a region of the users body4 Requirements4.1 SizingCoveralls shall be available in a range of sizes to fit the user population.Coveralls shall be oversized in order to fit over blunt trauma protectors andbody armour, and

35、 to allow for an air gap to be maintained between the fabricand the user. The over measurement shall be provided by the manufacturers inthe user information.NOTE Functional undergarments are not required to be oversized.4.2 InnocuousnessThe manufacturer shall ensure by testing or by declaration that

36、 the materials ortheir derivatives shall not be known to harm the user, i.e. that they are notknown to contain any toxic, carcinogenic, allergenic or otherwise harmfulsubstances that could be released under foreseeable conditions of use.4.3 CleaningCoveralls and functional undergarments shall be abl

37、e to be cleaned and shall bemarked with suitable cleaning instructions.NOTE 1 An example of cleaning instructions is pictograms conforming toBS EN ISO 3758.BRITISH STANDARD BS 7971-10:2014 The British Standards Institution 2015 3User information shall include any additional instructions the user mig

38、ht need toensure chemical repellent finishes are correctly reactivated, for example byironing.NOTE 2 This British Standard does not cover cleaning by industrial processes. Anyuser intending to use such processes should carry out additional validation checks onthe durability of the performance of the

39、 system to the industrial cleaning processselected.4.4 Material compositionCoveralls and, where applicable, functional undergarments shall be marked withthe material composition, which shall also be declared in the information to theuser.4.5 Design and construction4.5.1 GeneralDesign features shall

40、be subjected to a visual assessment.Design features which might be necessary for ease of movement and fit, forexample elastication or pleats at waist, wrists and ankles, shall not allow thefabric to gather excessively as this could create flammable liquid traps.The collar shall be able to be closed

41、up to the chin.Pockets shall be constructed either from the outer material of the coverall orfrom an alternative flame retardant material meeting the requirements of thisBritish Standard and shall be covered by a flap which cannot fold into thepocket to ensure they do not form a flammable liquid tra

42、p.NOTE If the pocket is constructed from a material other than the outer material, itshould be treated as a different construction in relation to heat and flame testing(see 5.3).All external openings shall be constructed entirely from the outer material ofthe coverall and each external opening shall

43、 be provided with a closure systemwhich shall be covered by a protective flap constructed of the outer material.The coverall shall have closure systems at the ends of the sleeves and thebottoms of the legs such that they can be adjusted and closed over gloves andboots. Exposed knitted material closu

44、re systems shall not be used.Metal components which penetrate the outer material shall be covered with asuitable material (for example, the outer material or an alternative flameretardant material).4.5.2 Multi-layer coverallsThe layers of multi-layer coveralls shall be permanently attached to each o

45、therin such a way that they cannot be detached and worn separately.4.5.3 Two-piece coverallsTwo-piece coveralls shall have a closure system which enables them to be joinedtogether to produce a one-piece item.The closure system which fastens the jacket to the trouser shall be a singlecontinuous closu

46、re running from the centre front around the back to the centrefront.The closure system shall be completely covered by a protective flap constructedof the outer material to minimize exposure to direct flame.BRITISH STANDARDBS 7971-10:20144 The British Standards Institution 20154.6 Test performance4.6

47、.1 GeneralTest samples shall be taken from garments unless otherwise indicated.Where prepared manufactured seams or material samples are used for testing,the manufacturer shall declare that these are of the same composition andconstruction as the final garments.Intended cleaning instructions includi

48、ng any details for reactivation of appliedfinish shall be provided by the manufacturer. Reference detergents 2 or 3conforming to BS EN ISO 6330:2012 shall be selected for all laundering testsbased on the information provided by the manufacturer.NOTE Reference detergent 2 is a biological detergent wi

49、thout optical brightnersand reference detergent 3 is a non-biological detergent without optical brightners.Intended maximum cleaning cycles shall be specified where this is greater thanfive cycles.4.6.2 Testing of materials in original state4.6.2.1 Colour fastnessWhen tested in accordance with BS EN ISO 105-B02:2013, the colour fastness ofthe outer material of the coverall shall be greater than or equal to blue woolstandard 4.When tested in accordance with BS EN ISO 105-X12:2002, the dry colour fa