BS 1902-3 0-1988 Methods of testing refractory materials - General and textural properties - Introduction《耐火材料试验方法 第3部分 一般特性和结构特性 第0节 引言》.pdf

《BS 1902-3 0-1988 Methods of testing refractory materials - General and textural properties - Introduction《耐火材料试验方法 第3部分 一般特性和结构特性 第0节 引言》.pdf》由会员分享，可在线阅读，更多相关《BS 1902-3 0-1988 Methods of testing refractory materials - General and textural properties - Introduction《耐火材料试验方法 第3部分 一般特性和结构特性 第0节 引言》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 1902-3.0: 1988 Methods of testing Refractory materials Part 3: General and textural properties Section 3.0 Introduction UDC 666.76.017BS1902-3.0:1988 This British Standard, having been prepared under the directionof the Refractory Products Standards Committee, was published under

2、 the authorityof the Board of BSI andcomes into effect on 29February 1988 BSI 07-1999 First published February 1981 First revision February 1988 The following BSI references relate to the work on this standard: Committee reference RPM/1 Draft for comment 87/38492 DC ISBN 0 580 16445 4 Committees res

3、ponsible for this British Standard The preparation of this British Standard was entrusted by the Refractory Products Standards Committee (RPM/-) to Technical Committee RPM/1, upon which the following bodies were represented: British Ceramic Research Ltd. British Steel Industry Electricity Supply Ind

4、ustry in England and Wales Engineering Equipment and Materials Users Association Refractories Association of Great Britain Refractory Contractors Association Society of Glass Technology Amendments issued since publication Amd. No. Date of issue CommentsBS1902-3.0:1988 BSI 07-1999 i Contents Page Com

5、mittees responsible Inside front cover Foreword ii Table 1 List of Parts of BS 1902 1BS1902-3.0:1988 ii BSI 07-1999 Foreword This Section of BS 1902-3 has been prepared under the direction of the Refractory Products Standards Committee. It supersedes BS 1902-3.0:1981, which is withdrawn. This Sectio

6、n serves as an introduction to the whole of Part 3 of BS 1902, the general arrangement of which is shown in Table 1, together with a list of the Sections of Part 3. The Sections are published separately. The methods of test described in the Sections of Part 3 are either updated versions of the metho

7、ds originally described in Parts 1A:1966 and 1B:1967 or are based on corresponding work by the International Organization for Standardization (ISO). The details are indicated in each Section. Each method in Part 3 is suitable for use as a laboratory method, or as a referee method, unless otherwise s

8、tated in the scope of the Section concerned. Any appendices to the Sections of Part 3 describe alternative methods, or alternatives to some portions of the methods, which may be used in the circumstances described in the introduction to the appendix concerned. Unless otherwise specified in the scope

9、 of the Section concerned, each method is applicable to both dense shaped and shaped insulating products. Sections 3.1, 3.2 and 3.13 are of general application, not only to the remaining Sections of Part 3 but also, where appropriate, to Sections of other Parts. A British Standard does not purport t

10、o include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover,

11、 pages i and ii, pages1 and 2 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS1902-3.0:1988 BSI 07-1999 1 Table 1 List of Parts of BS 1902 (showing the Sections o

12、f Part 3, which are published separately) Part/Section number Title Year of issue Remarks Part 1A Sampling and physical tests 1966 Mainly superseded by the Sections of Parts3,4 and 5. Declared obsolescent Part 2 Chemical analysis (wet methods) 19701987 Issued as three Sections Part 3 General and tex

13、tural properties Section 3.0 Introduction 1988 Second edition Section 3.1 Guidance on sampling 1981 Confirmed 1987 Section 3.2 Measurement of dimensions of specimens for testing (methods 1902-302) 1981 Confirmed 1986 Section 3.3 Sieve analysis (methods 1902-303) 1981 To be confirmed in 1988. Amendme

14、nt 1988 Section 3.4 Determination of true density (method 1902-304) 1981 Confirmed 1987 Section 3.5 Determination of powder density (method 1902-305) 1981 Confirmed 1986 Section 3.6 Determination of grain density (methods 1902-306) 1984 Amendment 1988 Section 3.7 Determination of bulk density and tr

15、ue porosity of shaped insulating products (method 1902-307) 1981 Confirmed 1987 Section 3.8 Determination of bulk density, true porosity and apparent porosity of dense shaped products (methods1902-308) 1981 Section 3.9 Determination of permeability to gases (method 1902-309) 1981 Section 3.10 Determ

16、ination of resistance to carbon monoxide (method 1902-310) 1981 Section 3.11 Measurement of dimensions and shape of refractory bricks and blocks (methods 1902-311) 1983 Section 3.12 Determination of resistance to acids (method 1902- 312) 1983 Section 3.13 Measurement of corner and edge defects and o

17、ther surface imperfections of refractory bricks and blocks (attributive properties) (method 1902-313) 1985 Section 3.14 Determination of hydration tendency (methods 1902-314) 1987 Section 3.15 Determination of resistance to acids, for bulk material Section 3.16 Determination of pore size distributio

18、n BS1902-3.0:1988 2 BSI 07-1999Table 1 List of Parts of BS 1902 (showing the Sections of Part 3, which are published separately) Part/Section number Title Year of issue Remarks Part 4 Properties measured under an applied stress 1984 Sections issued separately. See Section 4.0 for details Part 5 Refr

19、actory and thermal properties 1983 In preparation, to be issued in Sections. See Section 5.0 (issued1983) for list of Sections Part 6 Ceramic fibre products 1986 Part 7 Unshaped refractories used in monolithic construction 1987 Sections issued separately. See Section7.0 for details Part 8 Carbon-con

20、taining refractories Part 9 Chemical analysis by instrumental methods 1987 Issued in two Sections Part 10 Slab insulation materials Part 11 Refractory mortars Part 12 Raw materials blankBS 1902-3.0: 1988 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent n

21、ational body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess t

22、he latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of w

23、hich can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards

24、 publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards B

25、SI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centr

26、e. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright

27、 Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any

28、 form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.