ASTM E2844-2015e1 Standard Specification for Demonstrating That a Building&x2019 s Location Provides Access to Public Transit《证明建筑位置提供有公共交通通行路径的标准规格》.pdf

《ASTM E2844-2015e1 Standard Specification for Demonstrating That a Building&x2019 s Location Provides Access to Public Transit《证明建筑位置提供有公共交通通行路径的标准规格》.pdf》由会员分享，可在线阅读，更多相关《ASTM E2844-2015e1 Standard Specification for Demonstrating That a Building&x2019 s Location Provides Access to Public Transit《证明建筑位置提供有公共交通通行路径的标准规格》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E2844 151Standard Specification forDemonstrating That a Buildings Location Provides Accessto Public Transit1This standard is issued under the fixed designation E2844; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the

2、 year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1NOTEKeywords in Section 7 were corrected editorially in September 2015.1. Scope1.1 This specification provides requireme

3、nts for demon-strating that a buildings location provides a minimal level ofaccess to public transit such that building occupants can rely onpublic transit to travel to places of employment and to runtypical errands.1.2 This specification addresses a single indicator regardingthe environmental perfo

4、rmance related to a buildings location.It provides one option for evaluating whether a building islocated in such a way as to minimize the impacts associatedwith occupants travel.NOTE 1The indicator in and of itself is insufficient to imply any levelof “sustainability” for the building or the neighb

5、orhood. Similarly, abuildings failure to meet this specification does not necessarily signify alack of sustainability. Other indicators may be more appropriate for thatbuilding or region; those indicators are outside the scope of this specifi-cation.1.3 The values stated in inch-pound units are to b

6、e regardedas standard. The values given in parentheses are mathematicalconversions to SI units that are provided for information onlyand are not considered standard.1.4 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of th

7、e user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2E631 Terminology of Building ConstructionsE2114 Terminology for Sustainability Relative to the Perfor-mance

8、 of Buildings3. Terminology3.1 Definitions:3.1.1 For terms related to building, refer to TerminologyE631.3.1.2 For terms related to sustainability relative to theperformance of buildings, refer to Terminology E2114.3.2 Definitions of Terms Specific to This Standard:3.2.1 access location, nclosest po

9、int for the public toboard a transit vehicle on a given route.3.2.2 headway, ntime interval between public transit ve-hicles moving in the same direction on a particular route.3.2.2.1 DiscussionIf multiple routes at a given stop share60 % or more of their route, they can be viewed as the sameroute f

10、or purposes of calculating headways.3.2.3 local transit, npublic transit that meets one or bothof the following characteristics: (1) operates within the sameright-of-way as automobile traffic or (2) the distance betweenits access locations averages less than 1/3 mile (0.5 km).3.2.3.1 DiscussionTrans

11、it types that typically meet thisdefinition include local bus and streetcar.3.2.4 off-peak hours, nall hours that are not peak hours.3.2.5 peak hours, nhour(s) of greatest commuting in theregion in the morning and evening as identified by the localjurisdiction.3.2.6 public transit, ntransportation b

12、y a land, aerial, orwater conveyance that provides to the public regular andcontinuing transportation over fixed routes but does not includeprivate shuttle, school or charter bus, or intracity transportationsuch as a taxi.3.2.7 rapid transit, npublic transit that has both of thefollowing characteris

13、tics: (1) it operates within a dedicatedright-of-way and (2) the average distance between its accesslocations is greater than 1/3 mile (0.5 km).3.2.7.1 DiscussionTransit types that typically meet thisdefinition include bus rapid transit, light rail, heavy or passen-ger rail, and ferry service.1This

14、specification is under the jurisdiction of ASTM Committee E60 onSustainability and is the direct responsibility of Subcommittee E60.01 on Buildingsand Construction.Current edition approved Aug. 1, 2015. Published August 2015. DOI: 10.1520/E2844-15E01.2For referenced ASTM standards, visit the ASTM we

15、bsite, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United Sta

16、tes14. Significance and Use4.1 Use of this specification will facilitate the decision-making process for selection of a building site that providesopportunities for occupants to use public transit.4.2 Locating a building near public transit provides accessto transportation or transportation alternat

17、ives to the users ofthe building and, thus, has the potential to reduce vehicle milestraveled and the pollution attributable to automobile travel.4.3 The users of this specification include developers,planners, building owners, engineers, architects, landscapearchitects, and other design professiona

18、ls, contractors, realtors,governmental agencies, developers of building codes andrating systems, and other building industry professionals.5. Requirements5.1 Public Transit Identification and CategorizationPublic transit access locations near the building site shall beidentified and categorized as e

19、ither local transit or rapid transit.Public transit eligible for consideration under this specificationincludes existing service and planned service to which neces-sary funding and other resources have been dedicated to ensurethat the service is fully operational within one year of thebuildings occu

20、pancy certification date.5.2 Public Transit Access Location ProximityThe buildingshall be served by a minimum of one public transit accesslocation that meets the criteria described in 5.2.1, 5.2.2,orboth. The walk distance between a primary building entranceand a public transit access location shall

21、 be as measured overa continuous network of all-weather surfaced walkways anddedicated public rights of way. If a public transit route has aninbound or an outbound access location that is located outsidethe proximity criteria of 5.2.1 or 5.2.2, the average of theinbound and outbound access locations

22、 shall meet 5.2.1 or5.2.2 to qualify.5.2.1 A local transit access location is within mile(400 m) of a primary building entrance.5.2.2 A rapid transit access location is within mile(800 m) of a primary building entrance.5.3 Public Transit Access:5.3.1 The building shall be served by public transit op

23、era-tions of:5.3.1.1 No longer than 15-min headways during peak hoursand 30-min headways during off peak hours operating at aminimum of 14 h each weekday, and5.3.1.2 No longer than hourly headways operating at aminimum of 14 h on at least one day each weekend.5.3.2 Service for any given public trans

24、it route shall only beconsidered if its access location satisfies 5.2.1 or 5.2.2.5.3.2.1 ExceptionBuildings served only by passenger railor ferry service shall be served by a minimum of 24 trips perweekday and six trips for at least one day each weekend. Tripsin opposite directions shall be counted

25、separately.6. Documentation6.1 Documentation substantiating compliance with the re-quirements and criteria described in Section 5 shall include ascaled map of the vicinity of the proposed building with publictransit access locations and walk routes clearly marked anddimensioned and a corresponding t

26、able containing transitservice schedules and distances between public transit accesslocations and a buildings primary entrance. Where publictransit is planned, a supplemental document shall demonstratethat the planned public transit will be operational within oneyear of the buildings occupancy certi

27、fication date.6.2 Satisfaction of the Section 5 requirements shall bedemonstrated in conjunction with the site plan review.7. Keywords7.1 green building; public transit; transit access; transitservice; walkable; walkingASTM International takes no position respecting the validity of any patent rights

28、 asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any ti

29、me by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will

30、receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM

31、International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 1512