ASTM D16-2007 Standard Terminology for Paint Related Coatings Materials and Applications《涂料、相关涂层、材料和应用的标准术语》.pdf

《ASTM D16-2007 Standard Terminology for Paint Related Coatings Materials and Applications《涂料、相关涂层、材料和应用的标准术语》.pdf》由会员分享，可在线阅读，更多相关《ASTM D16-2007 Standard Terminology for Paint Related Coatings Materials and Applications《涂料、相关涂层、材料和应用的标准术语》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: D 16 07Standard Terminology forPaint, Related Coatings, Materials, and Applications1This standard is issued under the fixed designation D 16; the number immediately following the designation indicates the year of originaladoption or, in the case of revision, the year of last revision.An

2、umber in parentheses indicates the year of last reapproval.Asuperscriptepsilon (e) indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the Department of Defense.1. Scope*1.1 This standard consists of technical terms used in stan-

3、dards under the jurisdiction of ASTM Committee D01 (onPaint and Related Coatings, Materials, and Applications), andof definitions suitable for use in these standards.NOTE 1When any definition in this standards i quoted or publishedout of the context of this standard, editorially insert the following

4、delimiting statement “for paints and related coatings, materials, andapplications” after the dash following the term (in the absence of anexisting delimiting statement). This will limit the filed of application ofthe term and definition to that approved by this committee.1.2 In this terminology stan

5、dard, definitions used in otherASTM standards are indicated by following the definition withthe designation of that standard. In some cases, a relevant D01subcommittee is also listed. Definitions influenced by thoseused by other organizations are indicated by the acronym of theorganization. Primary

6、terms are given in bold, while narrowerand unapproved terms are given in italics.1.3 There are several specialized terminology standardsunder the jurisdiction of Committee D01, as follows: D 804,D 1695, D 6440, D 6488, and D 7188. Few definitions fromthose standards are included in Terminology D 16.

7、 Therefore,in searches for definitions of paints and coatings terms, thesestandards should be included where appropriate.2. Referenced Documents2.1 ASTM Standards:2D 804 Terminology Relating to Naval Stores, Including TallOil and Related ProductsD 968 Test Methods for Abrasion Resistance of OrganicC

8、oatings by Falling AbrasiveD 1475 Test Method For Density of Liquid Coatings, Inks,and Related ProductsD 1653 Test Methods for Water Vapor Transmission ofOrganic Coating FilmsD 1695 Terminology of Cellulose and Cellulose DerivativesD 1729 Practice for Visual Appraisal of Colors and ColorDifferences

9、of Diffusely-Illuminated Opaque MaterialsD 1736 Test Method for Efflorescence of Interior WallPaints3D 1848 Classification for Reporting Paint Film FailuresCharacteristic of Exterior Latex Paints3D 2794 Test Method for Resistance of Organic Coatings tothe Effects of Rapid Deformation (Impact)D 2946

10、Terminology for Asbestos and AsbestosCementProductsD 3450 Test Method for Washability Properties of InteriorArchitectural CoatingsD 4062 Test Method for Leveling of Paints by Draw-DownMethodD 4209 Practice for Determining Volatile and NonvolatileContent of Cellulosics, Emulsions, Resin Solutions, Sh

11、el-lac, and VarnishesD 4366 Test Methods for Hardness of Organic Coatings byPendulum Damping Tests3D 4958 Test Method for Comparison of the Brush Drag ofLatex PaintsD 5146 Guide to Testing Solvent-Borne Architectural Coat-ingsD 5178 Test Method for Mar Resistance of Organic Coat-ingsD 6440 Terminolo

12、gy Relating to Hydrocarbon ResinsD 6488 Terminology Relating to Print ProblemsD 7188 Terminology for Printing Inks, Materials, and Pro-cessesE 284 Terminology of Appearance2.2 EPA Documents:4450/3-83-013R Glossary forAir Pollution Control of Indus-trial Coating OperationsMethod 24, 40 CFR Part 60, A

13、ppendix A Determination ofVolatile Matter Content, Water Content, Density, VolumeSolids, and Weight Solids of Surface Coatings1This terminology is under the jurisdiction of ASTM Committee D01 on Paintand Related Coatings, Materials, andApplications and is the direct responsibility ofSubcommittee D01

14、.16 on Terminology.Current edition approved July 1, 2007. Published August 2007. Originallyapproved in 1911. Last previous edition approve in 2003 as D 16 - 03.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of

15、 ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Withdrawn.4Available from United States Environmental Protection Association (EPA),Ariel Rios Bldg., 1200 Pennsylvania Ave., NW, Washington, DC 20460, http:/www.epa.gov.1*A Summary of Changes section

16、appears at the end of this standard.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.3. Terminology3.1 For definitions of terms having to do with appearance,see Terminology E 284.3.2 Definitions:abrasion resistance, n(for coatings) the

17、 ability of a coatingto resist being worn away and to maintain its originalappearance and structure when subjected to rubbing, scrap-ing, or wear. D 968, D01.23acid number, n(for coatings) the number of milligrams ofpotassium hydroxide (KOH) required to neutralize the freeacids in1gofanoil, resin, v

18、arnish, or other substance;generally reported on the nonvolatile content.acid valuesee acid number.acrylic resinunder resin, synthetic, see acrylic resin.additive, na substance added in small quantities to anothersubstance, usually to improve specific properties (for ex-ample, a drier, mildewcide, e

19、tc.).adhesion promoter, na material built into a binder or addedto a paint to form primary bonds to either the substrate or thepreviously applied coating, with the specific aim of improv-ing the dry or wet adhesion, or both. D01.23alkyd resinunder resin, synthetic, see alkyd resin.architectural coat

20、ing, norganic coating intended for on-siteapplication to interior or exterior surfaces of residential,commercial, institutional, or industrial buildings, in contrastto industrial coatings. D 5146, D01.42DISCUSSIONThey are protective and decorative finishes applied atambient temperatures. Often calle

21、d Trade Sales Coatings.associative thickener, nwater-soluble polymers containinghydrophobic groups that are capable of nonspecific hydro-phobic association similar to surfactants that elevate viscos-ity presumably by association between thickener particles orthickener and dispersed particles that ma

22、y be present in theaqueous system such as latex particles rather than throughhigh molecular weight or chain stiffness of the thickenermolecules themselves.autodeposition, na single-step immersion metal finishingprocess in which an organic coating is applied by means ofunique surface chemical reactio

23、ns carried out in an aqueouslatex dispersion, also referred to as chemiphoresis. Compo-nents within the bath give rise to chemical reactions thatslightly solubilize the metallic surface and lead to destabili-zation, deposition, and coalescence of the dispersed latexparticles at that surface.DISCUSSI

24、ONThe deposition rate of the latex is controlled by the rateof surface solubilization. The process does not require any pretreat-ments such as phosphating, needs no external energy input, and givesrise to deposition wherever the solution wets the substrate. Irregularlyshaped parts can be uniformly c

25、oated.baking finish, na paint or varnish that requires baking attemperatures above 150F (65C) for the development ofdesired properties.baking temperature, na temperature above 150F (65C).batch, nthe total quantity of a material produced in a singlefinal mixing operation after all production processe

26、s arecomplete, or just prior to filling.bituminous varnishunder varnish, see bituminous varnish.bleeding, nthe diffusion of coloring matter through a coatingfrom the substrate; also, the discoloration arising from suchdiffusion. In the case of printing ink, the spreading orrunning of a pigment color

27、 by the action of a solvent such aswater or alcohol.blistering resistance, nthe ability of a coating to resist theformation in the film of dome-shaped, liquid- or gas-filledprojections resulting from local loss of adhesion and liftingof the film from the previously applied coating or thesubstrate.bl

28、ocking, nfor coatings other than powder coatings, thesticking of a coated surface to an adjacent surface when thetwo surfaces have been in contact for an extended period oftime. D01.42brush-drag, nresistance encountered when applying a coat-ing by brush, directly related to the high-shear viscosity

29、ofthe coating. D 4958, D01.42bulking value, nsolid volume of a unit weight of material,usually expressed as gallons per pound. For practical pur-poses this is 0.120 divided by the specific gravity.caulking compound, na soft, plastic material, consisting ofpigment and vehicle, used for sealing joints

30、 in buildings andother structures where normal structural movement mayoccur.DISCUSSIONCaulking compound retains its plasticity for an ex-tended period after application. It is available in forms suitable forapplication by gun and knife and in extruded preformed shapes.cellulose lacquersee lacquer.ch

31、alking resistance, nthe ability of a pigmented coating toresist the formation of a friable powder on its surface causedby the disintegration of the binding medium by degradativeweather factors.checking resistance, nthe ability of a coating to resist slightbreaks in the film that do not penetrate to

32、the previouslyapplied coating or to the substrate. The breaks should becalled cracks if penetration extends to the previously appliedcoating or to the substrate. See cracking resistance.chipping resistance, nthe ability of a coating or layers ofcoatings to resist removal, usually in small pieces, re

33、sultingfrom impact by hard objects or from wear during service.coating, na liquid, liquefiable or mastic composition that isconverted to a solid protective, decorative, or functionaladherent film after application as a thin layer.color of an object, nthe aspect of the appearance of anobject dependen

34、t upon the spectral composition of theincident light, the spectral reflectance or transmittance of theobject, and the spectral response of the observer.hue, nthe attribute of color perception by means of whicha color is judged to be red, orange, yellow, green, blue,purple, or intermediate between ad

35、jacent pairs of these,considered in a close ring, red and purple being an adjacentpair. (White, gray and black colors possess no hue). E 284DISCUSSIONThe short end of the spectrum is violet, with purple bydefinition being a nonspectral combination of red and violet. Thepractice of replacing violet b

36、y purple in the roster of object colors isapparently a practical accommodation to color-order requirements, asdescribed in the Munsell system. See Practice D 1729.lightness, n(1) the attribute by which a perceived color isD16072judged to be equivalent to a member of a series of graysranging from bla

37、ck to white. (2) the attribute of colorperception by which a non-self-luminous body is judged toreflect more or less light. E 284saturationattribute of a visual sensation that permits ajudgment to be made of the proportion of pure chromaticcolor in the total sensation. E 284contrast ratio, nratio of

38、 the reflectance of a dry paint filmover a black substrate of 5 % or less reflectance, to thereflectance of the same paint, equivalently applied and dried,over a substrate of 80 % reflectance.coverage, coverage rate, covering powerambiguous termsthat are used in some instances to refer to hiding pow

39、er andin others to mean spreading rate. The precise terms hidingpower and spreading rate are preferred.cracking resistance, nthe ability of a coating to resist breaksof the film where the breaks extend through to the surfacepainted and the previously applied coating or the substrate isvisible. The u

40、se of a minimum magnification of 10 diametersis recommended in cases where it is difficult to differentiatebetween cracking and checking. See checking resistance.crawling, ndefect in which the wet film recedes fromlocalized areas of the substrate (usually caused by insuffi-cient wetting) leaving tho

41、se areas uncoated. D 1848,D01.42curtainingsee sag or sagging.density, nthe mass per unit volume of a substrate at aspecified temperature and pressure; usually expressed ing/mL, kg,L, g/cm3, g/L, kg/m3or lb/gal. See specificgravity. D01.23, D01.24DISCUSSION(1) g/mL = kg/L = g/cm3; g/L = kg/m3.(2) Den

42、sity(lb/gal) = Density (g/mL) 3 8.345405 . (3) The temperature should be25C for best conformance with Test Method D 1475. For liquids andsolids, which are the usual concerns of Committee D01, the pressureneed not be specified. (4) Density of water at 25C = 0.997044 g/mL =8.32 lb/gal.dirt(for coating

43、s) see soil.dirt resistance, n(for coatings) the ability of a coating toresist soiling by foreign material, other than microorganisms,deposited on or embedded in the dried coating.distinctness-of-image gloss, nthe sharpness with whichimage outlines are reflected by the surface of an object.dope, na

44、composition, usually a cellulosic lacquer, forapplication on textiles and leathers.drier, nan additive that accelerates the drying of an oil,paint, printing ink, or varnish.DISCUSSIONDriers are usually metallic compositions and are avail-able in both solid and liquid forms.drying oil, nan oil that p

45、ossesses to a marked degree theproperty of readily taking up oxygen from the air andchanging to a relatively hard, tough, elastic substance whenexposed in a thin film to the air.durability, na relative term indicating degree of perma-nency. It may be applied to individual protective, decorative,or f

46、unctional properties, for example, “the durability ofgloss,” but if used in a general way, for example, “theexcellent durability of a paint,” implies the ability of thedescribed coating to retain, to the indicated degree, all theproperties required for the continued service of the coating.edge-track

47、ing, na residual, discernible pattern in a roller-applied coating, characterized by trails from either or bothends of the roller.efflorescence, na condition that occurs when soluble salts ina dry coating or the substrate migrate to the surface due tothe movement of water through the film; characteri

48、zed by a(commonly) white, nonuniform powder or crystalline incrus-tation, not removable with neutral water but usually removedwith dilute mineral acid. D 1736, D 1848, D01.42DISCUSSIONThe previously water-soluble salts become insoluble atthe surface of the film due to reaction with carbon dioxide of

49、 the air.emulsion paintunder paint, see emulsion paint.enamel, na paint that is characterized by an ability to forman especially smooth film.erosion resistance, nthe ability of a coating to withstandbeing worn away by chalking or by the abrasive action ofwater or windborne particles of grit. The degree of resistanceis measured by the amount of the coating retained. Seeabrasion resistance.ester gumunder resin, synthetic, see ester gum.extended pigments, norganic pigments diluted with anextender (for example, alumina trihydr