ARMY MIL-DTL-11484 224 B-2010 LAPEL BUTTON AIR MEDAL CIVILIAN AIR FORCE《翻领纽扣 美国空军文职人员空军奖章》.pdf

《ARMY MIL-DTL-11484 224 B-2010 LAPEL BUTTON AIR MEDAL CIVILIAN AIR FORCE《翻领纽扣 美国空军文职人员空军奖章》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-11484 224 B-2010 LAPEL BUTTON AIR MEDAL CIVILIAN AIR FORCE《翻领纽扣 美国空军文职人员空军奖章》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET LAPEL BUTTON, AIR MEDAL, CIVILIAN, AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification

2、sheet and the latest issue of MIL-DTL-11484. MATERIAL: Gilding Metal FINISH: Hard Enameled, Nickel Plated, Mirror-like Polished and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 16. DIMENSIONS: HEIGHT (overall): 9/64 inch (REF) WIDTH (overall): 21/32 inch (REF) THICKNESS (at

3、edge): 0.065 inch + 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. INCH-POUND MIL-DTL-11484/224B 3 March 2010 SUPERSEDING MIL-DTL-3628/224A 27 September 1996 #7 #18 Provided by IHSNot for ResaleNo reproduction or networking permitted wi

4、thout license from IHS-,-,-MIL-DTL-11484/224B Page 2 of 2 2. Enameled areas shall be as indicated. The color shall conform to TIOH Enamel Color Chip Numbers listed below. COLOR CHIP NUMBER Orange 7 Blue 18 3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the manufac

5、turer. 4. Attaching device shall be prong with pick and wing type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue du

6、e to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Air Force - 11 Review activities: (Project No. 8455-2010-101) Air Force - 99 DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-