ANSI INCITS ISO IEC 9995-6-1994 Information technology - Keyboard layouts for text and office systems - Part 6 Function Section (Adopted by INCITS).pdf

《ANSI INCITS ISO IEC 9995-6-1994 Information technology - Keyboard layouts for text and office systems - Part 6 Function Section (Adopted by INCITS).pdf》由会员分享，可在线阅读，更多相关《ANSI INCITS ISO IEC 9995-6-1994 Information technology - Keyboard layouts for text and office systems - Part 6 Function Section (Adopted by INCITS).pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL STANDARD ISO/IEC 9995-6 First edition 1994-08-I 5 Information technology - Keyboard layouts for text and office systems - Part 6: Function Section Technologies de /information - Disposition des claviers conGus pour la bureautique - Par-tie 6: Module de fonctions Reference number ISO/IE

2、C 9995-6:1994(E) Processed and adopted by ASC NCITS and approved by ANSI as an American National Standard.Date of ANSI Approval: 1/14/99Published by American National Standards Institute,11 West 42nd Street, New York, New York 10036Copyright 1999 by Information Technology Industry Council (ITI).All

3、rights reserved.These materials are subject to copyright claims of International Standardization Organization (ISO),International Electrotechnical Commission (IEC), American National Standards Institute (ANSI), andInformation Technology Industry Council (ITI). Not for resale. No part of this publica

4、tion may be reproducedin any form, including an electronic retrieval system, without the prior written permission of ITI. All requestspertaining to this standard should be submitted to ITI, 1250 Eye Street NW, Washington, DC 20005.Printed in the United States of AmericaAdopted by INCITS (InterNation

5、al Committee for Information Technology Standards) as an American National Standard.Date of ANSI Approval: 1/14/99Published by American National Standards Institute,25 West 43rd Street, New York, New York 10036Copyright 2002 by Information Technology Industry Council (ITI).All rights reserved.These

6、materials are subject to copyright claims of International Standardization Organization (ISO), InternationalElectrotechnical Commission (IEC), American National Standards Institute (ANSI), and Information Technology Industry Council(ITI). Not for resale. No part of this publication may be reproduced

7、 in any form, including an electronic retrieval system, withoutthe prior written permission of ITI. All requests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW,Washington, DC 20005.Printed in the United States of AmericaISO/IEC 9995-6:1994(E) Contents Page 1 Scope 1 2 Con

8、formance 1 3 Normative references . 1 4 Definitions . 1 5 Arrangement and location . 1 6 Division into zones 1 0 ISO/IEC 1994 All nghts reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including pho

9、tocopyrng and microfilm, without permission in writing from the publisher. ISO/IEC Copyright Office l Case Postale 56 l Cl-i-121 1 Geneve 20 l Switzerland Printed in Switzerland ii 0 ISO/IEC ISO/IEC 9995-6:1994(E) Foreword IS0 (the International Organization for Standardization) and IEC (the Inter-

10、national Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of IS0 or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fi

11、elds of technical activity. IS0 and IEC technical com- mittees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with IS0 and IEC, also take part in the work. In the field of information technology, IS0 and IEC have established

12、 a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for vot- ing. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. International Standar

13、d ISO/IEC 9995-6 was prepared by Joint Technical Committee ISO/I EC JTC 1, information technology, Subcommittee SC 18, Document processing and related communication. This first edition supersedes all or part of IS0 1090:1981 IS0 1091:1977 IS0 1092: 1974 IS0 1093:1981 IS0 2126:1975 IS0 2530: 1975 IS0

14、 3243: 1975 IS0 3244: 1984 IS0 4169:1979 IS0 8884: 1988. For complete details, see annex A of part 1 of ISO/IEC 9995. ISO/IEC 9995 consists of the following parts, under the general title In- formation technology - Keyboard layouts for text and office systems: - Part 1: General principles governing

15、keyboard layouts - Part 2: Alphanumeric section III ISO/IEC 9995-6:1994(E) 0 ISO/IEC - Part 3: Complementary layouts of the alphanumeric zone of the al- phanumeric section - Part 4: Numeric section - Part 5: Editing section - Part 6: Function section - Part 7: Symbols used to represent functions - P

16、art 8: Allocation of letters to the keys of a numeric keypad iv INTERNATIONAL STANDARD 0 ISO/IEC ISO/IEC 9995-6:1994(E) Information technology - Keyboard layouts for text and office systems - Part 6: Function Section 1 Scope Within the general scope described in part 1, this part of ISO/IEC 9995 spe

17、cifies the function section of a keyboard and the division of that section into zones. This part of ISO/IEC 9995 specifies the arrangement, the number, and the location of the keys in the func- tion zones of the function section as well as the allo- cation of functions to the keys. The first edition

18、 of this part of ISO/IEC 9995 does not allocate functions, except for the control function Es- cape, to the keys of the function section. Functions allocated to keys in other parts of ISO/IEC 9995 are defined in those parts. 2 Conformance Equipment is in conformance with this part of lSO/lEC 9995 if

19、 it meets the requirements of clauses 5 and 6. 3 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO/IEC 9995. At the time of publi- cation, the editions indicated were valid. All standards are subject to re

20、vision, and parties to agreements based on this part of ISO/IEC 9995 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. ISO/I EC 9995-l : 1994, info

21、rmation technology - Key- board layouts for text and office systems - Part 7: General principles governing keyboard layouts. ISO/IEC 9995-7:1994, information technology - Key- board layouts for text and office systems - Part 7: Symbols used to represent functions. 4 Definitions For the purposes of t

22、his part of ISO/IEC 9995, the definitions given in ISO/IEC 9995-l apply. 5 Arrangement and location The function section is an arrangement of keys lo- cated above and/or to the left of the other sections (see subclause 5.1 of ISO/IEC 9995-I). 6 Division into zones The function section is divided int

23、o zones as illus- trated in figure 1. The zones are numbered according to their relative importance and probable frequency of use. 6.1 Number and arrangement of keys. Zone ZFO of the function section shall consist of a rectangular area occupying some part of row K, ex- tending from column 99 to 15.

24、Zone ZFl occupies column 80 of rows A through E. Zone ZF2 occupies column 80 of row K. ISO/IEC 9995-6:1994(E) 0 ISO/IEC Zone ZF3 occupies columns 31 to 33 of row K and Zone ZF4 occupies columns 50 to 54 of row K. Zones ZFO, ZF2, ZF3 and ZF4 may extend into rows above row K. Zones ZFl and ZF2 may ext

25、end into column 79 and beyond as required. Only keys to which control functions or programmable functions are allocated, shall be located in the function zones ZFO to ZF4, but this part of ISO/IEC 9995 does not define the allocation of any key except as defined in 6.2 below. 6.2 Key allocations If t

26、he control function Escape, is provided, and if any of the function zones, which are implemented in row 0 ZF2 ZFI K, are present, then this function shall be allocated to a single key located in the leftmost position of row K. This key shall be distinct from the other keys to prevent inadvertent act

27、uation. The use of a symbol for the escape function key shall be as specified in ISO/IEC 9995-7. Ten or more keys shall be provided in zone ZFO to the right and separate from the key to which the escape function is allocated. If used, programmable functions shall be allocated to these keys. NOTE 1 K

28、ey effects The operation of any function key in the function section is reported to the application. No key effects are defined in this part of ISO/IEC 9995. The application, in interpreting the meaning of these keys, can take account of the state of any qualifier key. Not drawn to scale - all lines

29、 are only indicative ZFO Figure 1 - Division of the function section into zones ISO/IEC 9995-6:1994(E) o ISO/IEC ICS 35.180.00 Descriptors: data processing, text processing, data processing equipment, office machines, keyboards, keys (keyboards), specifications, layout, posltion (location). Price based on 2 pages