ANSI ESTA E1.30-10-2009 Identification of Draft Device Description Language Modules (Formerly PLASA E1.30-10).pdf

《ANSI ESTA E1.30-10-2009 Identification of Draft Device Description Language Modules (Formerly PLASA E1.30-10).pdf》由会员分享，可在线阅读，更多相关《ANSI ESTA E1.30-10-2009 Identification of Draft Device Description Language Modules (Formerly PLASA E1.30-10).pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 ANSI E1.30-10 2009 (R2014) EPI 32 Identification of Draft Device Description Language Modules CP/2008-1013r1a This document was approved as an American National Standard by the ANSI Board of Standards Review on 9 June 2014. It is a reaffirmation of the 2009 edition, CP/2008-1013r1. 2014 PLASA North

2、 America intentionally blank page ANSI E1.30-10 2009 (R2014) EPI 32 Draft Device Description Language Modules 2014 PLASA North America i CP/2008-1013r1a NOTICE and DISCLAIMER PLASA does not approve, inspect, or certify any installations, procedures, equipment or materials for compliance with codes,

3、recommended practices or standards. Compliance with a PLASA standard or an American National Standard developed by PLASA is the sole and exclusive responsibility of the manufacturer or provider and is entirely within their control and discretion. Any markings, identification or other claims of compl

4、iance do not constitute certification or approval of any type or nature whatsoever by PLASA. PLASA neither guarantees nor warrants the accuracy or completeness of any information published herein and disclaims liability for any personal injury, property or other damage or injury of any nature whatso

5、ever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on this document. In issuing and distributing this document. In issuing this document, PLASA does not either (a) undertake to render professional or other servic

6、es for or on behalf of any person or entity, or (b) undertake any duty to any person or entity with respect to this document or its contents. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining t

7、he exercise of reasonable care in any given circumstance. Published by: PLASA North America 630 Ninth Avenue, Suite 609 New York, NY 10036 USA Phone: 1-212-244-1505 Fax: 1-212-244-1502 standards.naplasa.org ANSI E1.30-10 2009 (R2014) EPI 32 Draft Device Description Language Modules 2014 PLASA North

8、America ii CP/2008-1013r1a The PLASA Technical Standards Program The PLASA Technical Standards Program was created to serve the PLASA membership and the entertainment industry in technical standards related matters. The goal of the Program is to take a leading role regarding technology within the en

9、tertainment industry by creating recommended practices and standards, monitoring standards issues around the world on behalf of our members, and improving communications and safety within the industry. PLASA works closely with the technical standards efforts of other organizations within our industr

10、y, including USITT and VPLT, as well as representing the interests of PLASA members to ANSI, UL, and the NFPA. The Technical Standards Program is accredited by the American National Standards Institute. The Technical Standards Council (TSC) was established to oversee and coordinate the Technical Sta

11、ndards Program. Made up of individuals experienced in standards-making work from throughout our industry, the Council approves all projects undertaken and assigns them to the appropriate working group. The Technical Standards Council employs a Technical Standards Manager to coordinate the work of th

12、e Council and its working groups as well as maintain a “Standards Watch” on behalf of members. Working groups include: Control Protocols, Electrical Power, Floors, Fog and Smoke, Followspot Position, Photometrics, Rigging, and Stage Lifts. PLASA encourages active participation in the Technical Stand

13、ards Program. There are several ways to become involved. If you would like to become a member of an existing working group, as have over four hundred people, you must complete an application which is available from the PLASA office. Your application is subject to approval by the working group and yo

14、u will be required to actively participate in the work of the group. This includes responding to letter ballots and attending meetings. Membership in PLASA is not a requirement. You can also become involved by requesting that the TSC develop a standard or a recommended practice in an area of concern

15、 to you. The Control Protocols Working Group, which authored this Standard, consists of a cross section of entertainment industry professionals representing a diversity of interests. PLASA is committed to developing consensus-based standards and recommended practices in an open setting. ANSI E1.30-1

16、0 2009 (R2014) EPI 32 Draft Device Description Language Modules 2014 PLASA North America iii CP/2008-1013r1a Contact Information Technical Standards Manager Karl G. Ruling PLASA North America 630 Ninth Avenue, Suite 609 New York, NY 10036 USA 1-212-244-1505 karl.rulingplasa.org Assistant Technical S

17、tandards Manager Erin Grabe PLASA North America 630 Ninth Avenue, Suite 609 New York, NY 10036 USA 1-212-244-1505 erin.grabeplasa.org Technical Standards Council Chairpersons Mike Garl Mike Garl Consulting LLC 836 Smoke Creek Rd. Knoxville, TN 37934 USA 1-865-389-4371 Mike Wood Mike Wood Consulting

18、 LLC 6401 Clairmont Drive Austin, TX 78749 USA 1-512-288-4916 Control Protocols Working Group Chairpersons Michael Lay Philips Color Kinetics 3 Burlington Woods Drive Burlington, MA 01803 USA 1-781-418-9145 Kimberly Corbett-Oates Schuler Shook 325 North Saint Paul, Suite 3250 Dallas, TX 75201 USA

19、1-214-747-8300 ANSI E1.30-10 2009 (R2014) EPI 32 Draft Device Description Language Modules 2014 PLASA North America iv CP/2008-1013r1a Acknowledgments The Control Protocols Working Group members when this document was approved by the working group on 1 May 2014 are shown below. Voting members: Dani

20、el W. Antonuk; Electronic Theatre Controls, Inc.; MP Robert Bell; Acuity Brands Inc.; MP Marcus Bengtsson; LumenRadio AB; MP Scott M. Blair; Full Throttle Films/ VER; DR Milton Davis; Doug Fleenor Design, Inc.; MP Casey Diers; DesignLab Chicago, Inc.; DR Gary Douglas; Acuity Brands Inc.; MP Doug Fle

21、enor; Doug Fleenor Design, Inc.; MP Howard Forryan; Harting KGAA; G Garrett Gallant; Acuity Brands Inc.; MP Ed Garstkiewicz; Harting KGAA; G Robert Goddard; Goddard Design Co.; MP Dennis Grow; I.A.T.S.E. Local 728; U Mitch Hefter; USITT; U Jeremy Hochman; Full Throttle Films/ VER; DR John Huntington

22、; I.A.T.S.E. Local 1; U Tyrone Mellon_Jr.; Lex Products Corp.; CP Michael Karlsson; LumenRadio AB; MP Hyun Jong Kim; Electronics and Telecommunications Research Institute; G Peter Kirkup; LumenRadio AB; MP Paul Kleissler; City Theatrical, Inc.; MP Edwin S. Kramer; I.A.T.S.E. Local 1; U Ulrich Kunkel

23、; DIN, NVBF Committee; U Roger Lattin; I.A.T.S.E. Local 728; U Hans Lau; LumenRadio AB; MP Michael Lay; Royal Philips; MP Sang-Kyu Lim; Electronics and Telecommunications Research Institute; G Joshua Liposky; Lex Products Corp.; CP Kevin Loewen; Acuity Brands Inc.; MP Simon Newton; Open Lighting Pro

24、ject; G Maya Nigrosh; Electronic Theatre Controls, Inc.; MP Philip Nye; Acuity Brands Inc.; MP Kimberly Corbett Oates; Schuler Shook; DE Edward A. (Ted) Paget; Daktronics Inc. ; G Jason Potterf; Cisco; MP Charles Reese; Production Resource Group; DR Alan M. Rowe; I.A.T.S.E. Local 728; U Larry Schoen

25、eman; DesignLab Chicago, Inc.; DR Eckart Steffens; Soundlight, the DMX Company; CP Steve Terry; Electronic Theatre Controls, Inc.; MP Ken Vannice; Ken Vannice LLC; G Peter Willis; Howard Eaton Lighting Ltd.; CP Observer (non-voting) members: Simon Alpert; Lighttech Event Technologies; CP Klaus Amlin

26、g; Licht-Technik; MP Matthew Ardine; IATSE Local 728; U Avraham Mendall Mor “Avi“; Lightswitch; U Robert Barbagallo; Solotech Inc.; U ANSI E1.30-10 2009 (R2014) EPI 32 Draft Device Description Language Modules 2014 PLASA North America v CP/2008-1013r1a Paul Beasley; Walt Disney Company; U BenDarring

27、ton; Wireless Solutions Sweden AB; MP Adam Bennette; Electronic Theatre Controls, Inc.; MP David Bertenshaw; David Bertenshaw; G Stephen Bickford; T. Kondos Associates; U Torrey Bievenour; Vision Quest Lighting; G Lee J. Bloch; Bloch Design Group, Inc.; G David A. Boller; Organic Machines LLC; CP Ro

28、n Bonner; PLASA EU; G Andr Broucke; Andr Broucke; G Ken Bruns; Lumenpulse Lighting Inc.; MP John (Javid) D. Butler; Integrated Theatre, Inc.; CP Justyn Butler; JBOTS; CP Jean-Francois Canuel; A.C. Lighting Ltd.; CP Steve Carlson; High Speed Design, Inc.; MP Nyasha Chigwamba; Rhodes University; U San

29、g-Il Choi; Kyungpook National University; G Soo-Myong Chung; Bloch Design Group, Inc.; G Paul J. Clark; HxDx; CP Edward R. Condit; Edward R. Condit; G Fraser Connolly; Artistic Licence Holdings; DE Eric Cornwell; West Side Systems; U Stuart Cotts; Oregon Shakespeare Festival; U Klas Dalbjorn; TC Gro

30、up; MP Jeremy Day; Royal Philips; MP Gilray Densham; CAST Group Inc; MP Gary Dove; Dove Systems; MP Yongshun Duan; Macostar International Ltd.; CP Hamish Dumbreck; James Embedded Systems Engineering; MP Lauren E. Dunn; Lauren E. Dunn (Larry); DE Jerry Durand; Durand Interstellar, Inc.; CP James Eade

31、; PLASA EU; G Andrew Eales; Rhodes University ; U Bill Ellis; Candela Controls, Inc.; U Paul K. Ericson; Sparling DE Jon R. Farley; Sixteenth Avenue Systems; CP Martin Farnik; Robe Show Lighting s.r.o.; MP Trevor Forrest; Helvar Lighting Control; MP Steve Friedlander; Auerbach Pollock Friedlander; U

32、 Jerry Gorrell; Theatre Safety Programs; G Tom Grimes; Barco; MP Josh Gubler; Josh Gubler; CP Rob Halliday; Rob Halliday; U Sean Harding; High Output, Inc.; G Douglas Heriot; Douglas Heriot; MP Bill Hewlett; Hewlett Electronics; CP Helge Hoffmann; JB Lighting; MP Jim Holladay; Luxence; G Wayne David

33、 Howell; Artistic Licence Holdings; DE Sierk Janszen; Ground Zero; U Eric Johnson; Eric Johnson; G Rob Johnston; Interactive Technologies, Inc.; MP Ed Jones; Edwin Jones Co., Inc.; CP Jussi Kallioinen; Eastway Sound U Tae Gyu Kang; Electronics and Telecommunications Research Institute; G ANSI E1.30-

34、10 2009 (R2014) EPI 32 Draft Device Description Language Modules 2014 PLASA North America vi CP/2008-1013r1a Reza Khanmalek; A.C. Lighting Ltd.; CP Hiroshi Kita; Marumo Electric Co., Ltd.; MP Phil Klapwyk; IATSE Local 891; U Mark T. Kraft; Lehigh Electric Products Co.; MP Jason Kyle; JPK Systems Ltd

35、.; MP Rick Leinen; Leviton Manufacturing Co., Inc.; MP Hans Leiter; Electronic Theatre Controls, Inc.; MP Jon Lenard; Applied Electronics; MP Maarten Lepelaars; eldoLED; MP Mark Manthei; Shure Inc.; G Paul F. Mardon; Pulsar Ltd.; MP Mick Martin; ShowCAD Control Systems; MP Paul Kenneth McEwan; Coope

36、r Controls Ltd.; MP John Mehltretter; Lehigh Electric Products Co.; MP Jeff T. Miller; Walt Disney Company; U John Musarra; John Musarra; U Tobin Neis; Barbizon Companies; DR Dan T. Nguyen; LynTec; MP Lars F. Paape; Scientific Algorithms and Embedded Systems; U Ben Peoples; Pittsburgh Hoist CP Gary

37、Pritchard; LSC Lighting Systems PTY Ltd; MP Gordan Rancic; Phoenix Service srl; MP Torben Kaas Rasmussen; Martin Professional A/S; G Charlie Richmond; Richmond Sound Design Ltd.; CP Bernardo Benito Rico; Ben-Ri Electronica S.A.; MP Steve Roberts; Carr G Erwin Rol; Erwin Rol; G Dietmar Rottinghaus; C

38、onnex GmbH; MP Richard Salzedo; Avolites Ltd.; MP Yngve Sandboe; Sand Network Systems, Inc.; MP Martin Searancke; Dream Solutions Ltd.; MP Chuck Seifried; City of Phoenix; U John Sellers; AIM Northwest; G Andrew Sherar; Lightmoves PLC; MP Yehuda Shukram; Compulite Systems; MP Sean Sill; Open Lightin

39、g Project; DE Storm K. Staley; Stormwerx; U Ralph Stillinger; Royal Philips; MP Bart Swinnen; Luminex LCE; MP Arnold Tang; Arnold Tang Productions; U Geoffrey O. Thompson; IEEE 802.3/Nortel Networks; G Christopher Tilton; Westlake Reed Leskosky; DE Robert Timmerman; Royal Philips; MP David Timmins;

40、Jands Electronics; MP Victoria Tisdale; Google Summer of Code 2013; G J. B. Toby; Avolites Ltd.; MP Bob Toms; Catalyst Microsystems LLC; G Robert Tooker; Robert Tooker; U Tad Trylski; Tad Trylski; U Stephen J. Tyrrell; Quantum Logic; MP Tracy Underhill; 4U Consulting; G Steve Unwin; Pulsar Ltd.; MP

41、Samuli Valo; Picturall Ltd.; MP Carlo Venturati; Clay Paky S.P.A.; MP Will Wagner; Carallon Ltd.; MP ANSI E1.30-10 2009 (R2014) EPI 32 Draft Device Description Language Modules 2014 PLASA North America vii CP/2008-1013r1a Oliver Waits; Avolites Ltd.; MP John Warwick; Royal Philips; MP Colin Waters;

42、TMB; DR Ralph Weber; ENDL Texas; G Lars Wernlund; Lewlight; MP Michael (Mike) Whetstone; Integrated Theatre, Inc.; CP Loren Wilton; Showman Systems; CP Barbara Wohlsen; Barbara Wohlsen; U C. S. Wong; Macostar International Ltd.; CP Jiantong Wu; Beijing Special Engineering Design G Kehang Wu; Shure I

43、nc.; G David Yellin; LightMinded Industries, Inc.; MP Larry Zoll; Zoll Design U Interest category codes: CP = Custom-market Producer DE = Designer DR = Dealer or Rental company G = General interest MP = Mass-market Producer U = User ANSI E1.30-10 2009 (R2014) EPI 32 Draft Device Description Language

44、 Modules 2014 PLASA North America 1 CP/2008-1013r1a Table of Contents NOTICE and DISCLAIMER . i Contact Information iii Acknowledgments iv Table of Contents. 1 Abstract . 1 1 Introductory Discussion . 1 2 Draft DDL Modules 2 2.1 DDL-draft URL 2 2.2 Controller Treatment of Draft Modules 2 3 Definitio

45、ns . 2 References 3 Normative . 3 Informative . 3 ACN EPIs ANSI E1.17-2006 is the “ESTA Architecture for Control Networks” standard ACN. It specifies an architecture including a suite of protocols and languages which may be configured and combined with other standard protocols in a number of ways to

46、 form flexible networked control systems. E1.17 Profiles for Interoperability (EPIs) are standards documents which specify how conforming implementations are to operate in a particular environment or situation in order to guarantee interoperability. They may specify a single technique, set of parame

47、ters or requirement for the various ACN components. They may also specify how other standards (including other EPIs) either defined within ACN or externally are to be used to ensure interoperability. Abstract This EPI specifies how draft DDL modules which may change frequently may be marked and iden

48、tified. 1 Introductory Discussion Device Description Language DDL provides a rich framework for describing devices in terms of a structure of properties accessed by a controller. Note This EPI refers extensively to elements and constructions which are part of the DDL standard DDL. To understand this

49、 specification will require some knowledge of DDL and its terms. A DDL module is defined within the DDL specification to be a behaviorset, languageset or device element and its contents (including attributes). All DDL modules of whichever type carry three mandatory attributes: UUID, provider and date: UUID is a Universally Unique Identifier UUID which is uniquely assigned to this module to be used as an identifier for it; p