ABS 10-2016 RULES FOR BUILDING AND CLASSING STEEL BARGES.pdf

《ABS 10-2016 RULES FOR BUILDING AND CLASSING STEEL BARGES.pdf》由会员分享，可在线阅读，更多相关《ABS 10-2016 RULES FOR BUILDING AND CLASSING STEEL BARGES.pdf（303页珍藏版）》请在麦多课文档分享上搜索。

1、 Rules for Building and Classing Steel Barges RULES FOR BUILDING AND CLASSING STEEL BARGES 2016 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 Copyright 2015 American Bureau of Shipping ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA Table of Cont

2、ents RULES FOR BUILDING AND CLASSING STEEL BARGES CONTENTS Notices and General Information . 1 PART 1 Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification) . 7 CHAPTER 1 Scope and Conditions of Classification . 9 See also separately published booklet ABS Rules f

3、or Conditions of Classification (Part 1) PART 2 Materials and Welding 17 See separately published booklet ABS Rules for Materials and Welding (Part 2) PART 3 Hull Construction and Equipment . 18 CHAPTER 1 General 19 CHAPTER 2 Hull Structures and Arrangements . 31 CHAPTER 3 Equipment 112 CHAPTER 4 Te

4、sting, Trials and Surveys During Construction Hull 129 CHAPTER 5 Safety Requirements for Barges with Personnel . 141 PART 4 Barge Systems and Machinery . 149 CHAPTER 1 Machinery, Piping and Electrical Systems . 150 PART 5 Specific Barge Types . 167 CHAPTER 1 Dry Cargo Barges 168 CHAPTER 2 Tank Barge

5、s . 188 CHAPTER 3 Other Barge Types . 246 PART 7 Surveys After Construction . 301 See separately published booklet ABS Rules for Survey After Construction (Part 7) ii ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2016 Notices and General Information Notices and General Information CONTENTS Introd

6、uction . 2 TABLE 1 Applicable Editions of Booklets Comprising 2016 Barge Rules . 3 TABLE 2 Division and Numbering of Rules 3 Change Notice (2016) . 4 TABLE 3 Summary of Changes from the 2015 Rules 4 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2016 1 Notices and General Information Introduction

7、1. The year 2016 edition of the Rules for Building and Classing Steel Barges consists of the eight (8) booklets as shown in Table 1. With regard to three booklets, Part 1, Part 2, and Part 7: a) The purpose of the generic title ABS Rules for Conditions of Classification (Part 1) is to reflect the ex

8、panded contents of PART 1, as a result of including consolidated requirements for “Classification” applicable to all types of and sizes of vessels, barges and specific shipboard arrangements/systems, etc., except for those in offshore service, as specified in the Foreword to Part 1. Additional speci

9、fic requirements are contained in Part 1 of these Rules for Building and Classing Steel Barges. b) The purpose of the generic title ABS Rules for Materials and Welding of PART 2 is to emphasize the common applicability of the requirements to ABS-classed vessels, other marine structures and their ass

10、ociated machinery, and thereby make PART 2 more readily a common “PART” of various ABS Rules and Guides, as appropriate. c) The purpose of the generic title ABS Rules for Survey After Construction (Part 7) is to reflect the expanded contents of PART 7, as a result of including consolidated requireme

11、nts for “Surveys After Construction” applicable to all types and sizes of vessels, barges and specific shipboard arrangements/systems, etc., as specified in Part 7, Chapter 1, Section 1. 2. The numbering system applied in the Rules is shown in Table 2. 3. The primary changes from the 2015 edition of

12、 the Rules are identified and listed in Table 3. The effective date of the indicated Rule Changes is 1 January 2016, unless specifically indicated otherwise. 4. The effective date of each technical change since 1993 is shown in parenthesis at the end of the subsection/paragraph titles within the tex

13、t of each Part. Unless a particular date and month are shown, the years in parentheses refer to the following effective dates: (2000) and after 1 January 2000 (and subsequent years) (1996) 9 May 1996 (1999) 12 May 1999 (1995) 15 May 1995 (1998) 13 May 1998 (1994) 9 May 1994 (1997) 19 May 1997 (1993)

14、 11 May 1993 5. Until the next edition of the Rules for Building and Classing Steel Barges is published, Notices and/or Corrigenda, as necessary, will be published on the ABS website www. eagle.org only, and will be available free for downloading. It is not intended to publish hard copies of future

15、Notices and/or Corrigenda to existing Rules or Guides. The consolidated edition of the Rules for Building and Classing Steel Barges, which includes Notices and/or Corrigenda using different colors for easy recognition, will be published on the ABS website only when Notices and/or Corrigenda are issu

16、ed. 6. The listing of CLASSIFICATION SYMBOLS AND NOTATIONS is available from the ABS website www.eagle.org for download. 2 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2016 Notices and General Information TABLE 1 Applicable Editions of Booklets Comprising 2016 Barge Rules Rules for Building and

17、Classing Steel Barges Notices and General Information 2016 Part 1: Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification) (1)2016 Part 3: Hull Construction and Equipment 2016 Part 4: Barge Systems and Machinery 2016 Part 5: Specific Barge Types 2016 Rules for Con

18、ditions of Classification not included (1,2)Part 1: Rules for Conditions of Classification 2016 Rules for Materials and Welding not included (2)Part 2: Rules for Materials and Welding 2016 Rules for Survey After Construction not included (2)Part 7: Surveys After Construction 2016 Notes: 1 The requir

19、ements for conditions of classification are contained in the separate, generic ABS Rules for Conditions of Classification (Part 1). Additional specific requirements are contained in Part 1 of these Rules. 2 The latest edition of these Rules is to be referred to. These Rules may be downloaded from th

20、e ABS website at www.eagle.org, Rules and Guides, Downloads or may be ordered separately from the ABS Publications online catalog at www.eagle.org, Rules and Guides, Catalog. TABLE 2 Division and Numbering of Rules Division Number Part Part 1 Chapter Part 1, Chapter 1 Section Section 1-1-1 Subsectio

21、n (see Note 1) 1-1-1/1 Paragraph (see Note 1) 1-1-1/1.1 Subparagraph 1-1-1/1.1.1 Item 1-1-1/1.1.1(a) Subitem 1-1-1/1.1.1(a)i) Appendix Appendix 1-1-A1 or Appendix 1-A1-1 Note: 1 An odd number (1, 3, 5, etc.) numbering system is used for the Rules. The purpose is to permit future insertions of even-n

22、umbered paragraphs (2, 4, 6, etc.) of text and to avoid the necessity of having to renumber the existing text and associated cross-references, as applicable, within the Rules and associated process instructions, check sheets, etc. ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2016 3 Notices and G

23、eneral Information Change Notice (2016) TABLE 3 Summary of Changes from the 2015 Rules EFFECTIVE DATE 1 July 2015 shown as (1 July 2015) (based on the contract date for new construction between builder and Owner) Part/Para. No. Title/Subject Status/Remarks PART 3 Hull Construction and Equipment 3-2-

24、12/9.1 General To add requirement for IMO PSPC (Section 3.3.2) and/or IMO PSPC-COT Regulations compliance. (Incorporates Notice No. 1) EFFECTIVE DATE 1 January 2016 shown as (2016) (based on the contract date for new construction between builder and Owner) Part/Para. No. Title/Subject Status/Remarks

25、 PART 3 Hull Construction and Equipment 3-1-2/13.5 (New) Frames, Beams and Stiffeners To clarify the requirements for built up sections, in line with 3-1-2/7.3 of the Under 90m Rules. 3-1-2/15.1.2 To clarify the requirements for built up sections, in line with 3-1-2/7.3 of the Under 90m Rules. 3-2-2

26、/12 (New) Bilge Plating To give consideration for increased strength in bilge plate due to its curved shape, in line with Part 5C, Chapter 5 of the Steel Vessel Rules. 3-2-6/5.7.3 End Connection To avoid corrugated bulkheads landing on inner bottom plates and creating stress concentration spots on p

27、rimary hull structures. 3-2-8/3.7 End Attachment To align the requirements with IACS UR S3.1, IACS UR S3.3 and service experience. 3-2-9/5.5 Coaming Stiffening To clarify the size of hatches that need not comply with the requirement of coaming stiffening. 3-2-9/18.1 Application To align the requirem

28、ents with IACS UR S26. 3-2-10/5.3.1 Basic Area To align the requirements with ICLL 1966 Chapter II Regulation 24 Freeing Ports. 3-3-1/3 Equipment with null To clarify that anchor winch or windlass is to comply with 3-3-1/19 of the Barge Rules. 3-3-1/5 Equipment for Manned Barges To clarify that anch

29、or winch or windlass is to comply with 3-3-1/19 of the Barge Rules. 3-4-1/1 General To reflect the comments from Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC m

30、eetings. 3-4-1/1.3.2 To reflect the comments from Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-4-1/3.3 Structural Testing To reflect the comments f

31、rom Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-4-1/5 Testing Methods To reflect the comments from Administrations and Industry Organizations cons

32、idered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 4 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2016 Notices and General Information Part/Para. No. Title/Subject Status/Remarks 3-4-1/7.1.1 Leak Te

33、sting To reflect the comments from Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-4-1/7.7 (New) Hydrostatic or Hydropneumatic Tightness Testing To re

34、flect the comments from Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-4-1/9 (New) Alternative Procedure for Strength Testing To reflect the comments

35、 from Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-4-1/Table 1 Testing Requirements for Tanks and Boundaries To reflect the comments from Administr

36、ations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-4-1/Table 2 Additional Testing Requirements for Barges or Tanks of Special Service To reflect the comments from

37、 Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-4-1/Table 3 Application of Leak Testing, Coating and Provision of Safe Access for Type of Welded Join

38、ts To reflect the comments from Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. PART 4 Barge Systems and Machinery 4-1-3/11.5 Lighting Circuits in Hazar

39、dous Areas To clarify that the use of a solidly grounded (earthed) distribution system is prohibited in hazardous areas. PART 5 Specific Barge Types 5-1-2/5.21 Structural Sea Chests To align the requirements with 3-2-4/17.1 of the Steel Vessel Rules. 5-2-3/7.17 Electrical Installations To reference

40、requirements for Electrical Installations for Barges Carrying Low Flashpoint Liquids (at or below 60C (140F) Closed Cup Test). 5-2-5/3 Application To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/5 Format To update the requirements in line with the new

41、IGC Code and comments from ABS engineers. 5-2-5/7 Submission of Data To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/13.5 Double Bottom Floors and Girders To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/2

42、1.1 Segregation of the Cargo Area To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/21.5.1 Manned Barge Only To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/21.9 Access to Spaces in the Cargo Area To update

43、 the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/23.33 Allowable Stresses and Design Criteria To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/23.5 Supporting Arrangements To update the requirements in line with the

44、 new IGC Code and comments from ABS engineers. 5-2-5/23.7 Guidance Formulae for Acceleration Components To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/25 Process Pressure Vessels and Liquid, Vapor, and Pressure Piping Systems To update the requirement

45、s in line with the new IGC Code and comments from ABS engineers. ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2016 5 Notices and General Information Part/Para. No. Title/Subject Status/Remarks 5-2-5/29 Cargo Pressure/Temperature Control To update the requirements in line with the new IGC Code an

46、d comments from ABS engineers. 5-2-5/31.1ii) To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/31.1iii) To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/31.3ii) To update the requirements in line with the ne

47、w IGC Code and comments from ABS engineers. 5-2-5/35 Electrical Installations To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/37 Fire Protection and Fire Extinction To update the requirements in line with the new IGC Code and comments from ABS engineer

48、s. 5-2-5/41 Instrumentation and Automation System To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/43.1 Unmanned Barge To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/47 Use of Cargo as Fuel To update the

49、requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/49.1 Unmanned Barge To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/53 (New) Hazardous Areas To update the requirements in line with the new IGC Code and comments from ABS engineers. 5-2-5/55 (New) Surveys To update the requirements in line with the new IGC Code and comments from ABS engineers. 6 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2016 PART Part 1: Conditions of Classification (Supplement to the ABS Rules for Conditions of Cla