BS PD CEN TR 15316-6-2-2017 Energy performance of buildings Method for calculation of system energy requirements and system efficiencies Explanation and justification of E.pdf

《BS PD CEN TR 15316-6-2-2017 Energy performance of buildings Method for calculation of system energy requirements and system efficiencies Explanation and justification of E.pdf》由会员分享，可在线阅读，更多相关《BS PD CEN TR 15316-6-2-2017 Energy performance of buildings Method for calculation of system energy requirements and system efficiencies Explanation and justification of E.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies Part 6-2: Explanation and justification of EN 15316-2, Module M3-5, M4-5 PD CEN/TR 15316-6-2:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 TECHNICA

2、L REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-2 May 2017 ICS 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-2: Explanation and justification of EN 15316-2, Module M3-5, M4-5

3、Performance nergtique des btiments - Mthode de calcul des besoins nergtiques et des rendements des systmes - Partie 6-2 : Explication et justification de lEN 15316-2, Module M3-5, M4-5 Energetische Bewertung von Gebuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlage

4、n - Teil 6-2: Begleitende TR zur EN 15316-2 (Raumluftsysteme (Heizen und Khlen) This Technical Report was approved by CEN on 27 February 2017. It has been drawn up by the Technical Committee CEN/TC 228. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Cze

5、ch Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Ki

6、ngdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 1

7、5316-6-2:2017 E National foreword This Published Document is the UK implementation of CEN/TR 15316-6-2:2017. The UK participation in its preparation was entrusted to Technical Committee RHE/24, Heating systems and water based cooling systems in buildings. A list of organizations represented on this

8、committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017 ISBN 978 0 580 94810 7 ICS

9、 91.120.10; 91.140.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017. Amendments/corrigenda issued since publication Date Text affected PUBLISHED

10、DOCUMENT PD CEN/TR 1531662:2017 TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-2 May 2017 ICS 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-2: Explanation and justifi

11、cation of EN 15316-2, Module M3-5, M4-5 Performance nergtique des btiments - Mthode de calcul des besoins nergtiques et des rendements des systmes - Partie 6-2 : Explication et justification de lEN 15316-2, Module M3-5, M4-5 Energetische Bewertung von Gebuden - Verfahren zur Berechnung der Energiean

12、forderungen und Nutzungsgrade der Anlagen - Teil 6-2: Begleitende TR zur EN 15316-2 (Raumluftsysteme (Heizen und Khlen) This Technical Report was approved by CEN on 27 February 2017. It has been drawn up by the Technical Committee CEN/TC 228. CEN members are the national standards bodies of Austria,

13、 Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, S

14、weden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for

15、 CEN national Members. Ref. No. CEN/TR 15316-6-2:2017 E PD CEN/TR 1531662:2017CEN/TR 15316-6-2:2017 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 7 2 Normative references 7 3 Terms and definitions . 8 4 Symbols and abbreviations . 8 4.1 Symbols . 8 4.2 Subscripts . 9 5 Description

16、 of the method . 9 5.1 Output of the method . 9 5.2 General description of the method . 9 5.2.1 General 9 5.2.2 non-uniform space temperature distribution . 10 5.2.3 Heat loss of embedded surface heating devices due to additional transmission to the outside 10 5.2.4 Control of the indoor temperature

17、 11 5.2.5 Effects of room automatisation . 11 5.2.6 Combined outside temperature for cool emission systems . 12 6 Calculation Method 12 6.1 Output data . 12 6.2 Calculation time steps 12 6.3 Input data 13 6.3.1 Source of data 13 6.3.2 Product data (technical data) 13 6.3.3 Configuration and system d

18、esign data . 15 6.3.4 Operating or boundary conditions 15 6.4 Monthly and yearly calculation procedure . 16 6.4.1 Applicable calculation interval . 16 6.4.2 Operating conditions calculation . 16 6.4.3 Energy calculation (additional heating / cooling losses) 16 6.4.4 Auxiliary energy calculation 20 6

19、.5 Hourly calculation procedure 21 6.5.1 Applicable calculation interval . 21 6.5.2 Operating conditions calculation . 21 6.5.3 Energy calculation (additional heating / cooling losses) 21 7 Quality control 25 8 Compliance check. 25 Annex A (informative) Template for choices, input data and reference

20、s (Additional heating and cooling losses / auxiliary energy) 26 A.1 Introduction . 26 A.2 Temperature variation for free heating surfaces (radiators), room heights 4 m (heating case) 27 PD CEN/TR 1531662:2017CEN/TR 15316-6-2:2017 (E) 3 A.3 Temperature Variation for component integrated heating surfa

21、ces (panel heaters) (room heights 4 m, heating case) 29 A.4 Temperature variation for air heating systems; room heights 4 m (heating case) 31 A.5 Temperature Variation for electrical heating (room heights 4 m, heating case) 32 A.6 Temperature Variation air heating (ventilation systems, room heights

22、4 m, heating case) . 33 A.7 Temperature variation for room spaces with heights 4 m (large indoor space buildings, heating case) 33 A.8 Temperature variation for room heaters fired by solid fuel 36 A.9 Temperature variation for water based cooling systems; room heights 4 m (cooling case) . 37 A.10 Au

23、xiliary Energy 38 A.11 Additional Information . 39 Annex B (informative) Default choices, input data and references (additional heating and cooling losses / auxiliary energy) . 41 B.1 Introduction 41 B.2 Temperature variation for free heating surfaces (radiators); room heights 4 m (heating case) . 4

24、2 B.3 Temperature Variation for component integrated heating surfaces (panel heaters) (room heights 4 m, heating case) 44 B.4 Temperature variation for air heating systems; room heights 4 m (heating case) 46 B.5 Temperature Variation for electrical heating (room heights 4 m, heating case) 47 B.6 Tem

25、perature Variation air heating (ventilation systems, room heights 4 m, heating case) . 48 B.7 Temperature variation for room spaces with heights 4 m (large indoor space buildings, heating case) 48 B.8 Temperature variation for room heaters fired by solid fuel 51 B.9 Temperature variation for water b

26、ased cooling systems; room heights 4 m (cooling case) . 52 B.10 Auxiliary Energy 53 B.11 Additional Information . 54 Bibliography . 56 PD CEN/TR 1531662:2017CEN/TR 15316-6-2:2017 (E) 4 European foreword This document (CEN/TR 15316-6-2:2017) has been prepared by Technical Committee CEN/TC 228 “Heatin

27、g systems and water based cooling systems in buildings”, the secretariat of which is held by DIN. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. Attention is drawn to the possibility that some of the elements of this d

28、ocument may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. PD CEN/TR 1531662:2017CEN/TR 15316-6-2:2017 (E) 5 Introduction This standard is part of a set of standards developed to support EPBD directive implementation, hereafter calle

29、d “EPB standards”. EPB standards deal with energy performance calculation and other related aspects (like system sizing) to provide the building services considered in the EPBD directive. CEN/TC 228 deals with heating systems in buildings. Subjects covered by CEN/TC 228 are: a) energy performance ca

30、lculation for heating systems; b) inspection of heating systems; c) design of heating systems; d) installation and commissioning of heating systems. The set of EPB standards, technical reports and supporting tools In order to facilitate the necessary overall consistency and coherence, in terminology

31、, approach, input/output relations and formats, for the whole set of EPB-standards, the following documents and tools are available: a) a document with basic principles to be followed in drafting EPB-standards: CEN/TS 16628:2014, Energy Performance of Buildings - Basic Principles for the set of EPB

32、standards 14; b) a document with detailed technical rules to be followed in drafting EPB-standards; CEN/TS 16629:2014, Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards 15; c) the detailed technical rules are the basis for the following tools: 1) a common templa

33、te for each EPB-standard, including specific drafting instructions for the relevant clauses; 2) a common template for each technical report that accompanies an EPB standard or a cluster of EPB standards, including specific drafting instructions for the relevant clauses; 3) a common template for the

34、spreadsheet that accompanies each EPB standard, to demonstrate the correctness of the EPB calculation procedures. Each EPB-standards follows the basic principles and the detailed technical rules and relates to the overarching EPB-standard, EN ISO 52000-1 16. One of the main purposes of the revision

35、of the EPB-standards is to enable that laws and regulations directly refer to the EPB-standards and make compliance with them compulsory. This requires that the set of EPB-standards consists of a systematic, clear, comprehensive and unambiguous set of energy performance procedures. The number of opt

36、ions provided is kept as low as possible, taking into account national and regional differences in climate, culture and building tradition, policy and legal frameworks (subsidiarity principle). For each option, an informative default option is provided (Annex B). PD CEN/TR 1531662:2017CEN/TR 15316-6

37、-2:2017 (E) 6 Rationale behind the EPB technical reports There is a risk that the purpose and limitations of the EPB standards will be misunderstood, unless the background and context to their contents and the thinking behind them is explained in some detail to readers of the standards. Consequently

38、, various types of informative contents are recorded and made available for users to properly understand, apply and nationally or regionally implement the EPB standards. If this explanation would have been attempted in the standards themselves, the result is likely to be confusing and cumbersome, es

39、pecially if the standards are implemented or referenced in national or regional building codes. Therefore each EPB standard is accompanied by an informative technical report, like this one, where all informative content is collected, to ensure a clear separation between normative and informative con

40、tents (see CEN/TS 16629 15): to avoid flooding and confusing the actual normative part with informative content; to reduce the page count of the actual standard; and to facilitate understanding of the set of EPB standards. This was also one of the main recommendations from the European CENSE project

41、 18 that laid the foundation for the preparation of the set of EPB standards. PD CEN/TR 1531662:2017CEN/TR 15316-6-2:2017 (E) 7 1 Scope This Technical Report refers to standard EN 15316-2. It contains information to support the correct understanding and use of EN 15316-2. The scope of this specific

42、part is to standardize the required inputs, the outputs and the links (structure) of the calculation method in order to achieve a common European calculation method. This standard covers energy performance calculation of heating systems and water based cooling space emission sub-systems. 2 Normative

43、 references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) appl

44、ies. EN 215, Thermostatic radiator valves - Requirements and test methods EN 416-2, Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 2: Rational use of energy EN 419-2, Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use of energy EN 442 (

45、all parts), Radiators and convectors Part 2: Test methods and rating EN 1264 (all parts), Water based surface embedded heating and cooling systems EN 14037 (all parts), Free hanging heating and cooling surfaces for water with a temperature below 120C EN 14337, Heating Systems in buildings - Design a

46、nd installation of direct electrical room heating systems EN 15316-1, Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 EN 153162, Energy performance

47、of buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5 EN 15500, Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment EN 16430 (

48、all parts), Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements EN 602401, Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra- red emitters (IEC 60240-1) EN ISO 7345:1995, Thermal insulation - Phys

49、ical quantities and definitions (ISO 7345:1987) EN ISO 13790, Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790) PD CEN/TR 1531662:2017CEN/TR 15316-6-2:2017 (E) 8 EN ISO 52000-1:2017, Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 7345:1995, EN ISO 52000-1:2017, and the