EN 13634-2017 Protective footwear for motorcycle riders - Requirements and test methods.pdf
《EN 13634-2017 Protective footwear for motorcycle riders - Requirements and test methods.pdf》由会员分享,可在线阅读,更多相关《EN 13634-2017 Protective footwear for motorcycle riders - Requirements and test methods.pdf(32页珍藏版)》请在麦多课文档分享上搜索。
1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Protective footwear for motorcycle riders - Requirements and test methodsBS EN 13634:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13634 December 2017 ICS 13.340.50 Supersedes EN 13634:2015English Version Pro
2、tective footwear for motorcycle riders - Requirements and test methods Chaussures de protection pour motocyclistes - Exigences et mthodes dessai Schutzschuhe fr Motorradfahrer - Anforderungen und Prfverfahren This European Standard was approved by CEN on 27 September 2017. CEN members are bound to c
3、omply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENE
4、LEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
5、 same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo
6、urg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1
7、040 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13634:2017 ENational forewordThis British Standard is the UK implementation of EN 13634:2017. It supersedes BS EN 13634:2015, which is withdrawn.The UK participation
8、 in its preparation was entrusted to Technical Committee PH/1, Safety, protective and occupational footwear.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users
9、 are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 96480 0ICS 13.340.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of t
10、he Standards Policy and Strategy Committee on 31 January 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 13634:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13634 December 2017 ICS 13.340.50 Supersedes EN 13634:2015English Version Protective foot
11、wear for motorcycle riders - Requirements and test methods Chaussures de protection pour motocyclistes - Exigences et mthodes dessai Schutzschuhe fr Motorradfahrer - Anforderungen und Prfverfahren This European Standard was approved by CEN on 27 September 2017. CEN members are bound to comply with t
12、he CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manageme
13、nt Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status
14、 as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
15、Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
16、 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13634:2017 EBS EN 13634:2017EN 13634:2017 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 6 4 Basic require
17、ments for motorcycle footwear . 7 4.1 General 7 4.2 Design 7 4.2.1 Height of upper 7 4.2.2 Whole upper . 10 4.3 Whole footwear . 10 4.3.1 bond strength 10 4.3.2 Innocuousness . 10 4.4 Uppers 10 4.4.1 pH value . 10 4.4.2 Chromium VI content 10 4.4.3 Colour fastness 10 4.4.4 Impact Abrasion resistance
18、 10 4.4.5 Impact cut resistance 12 4.5 Linings 13 4.5.1 General . 13 4.5.2 Tear strength . 13 4.5.3 Abrasion resistance . 13 4.5.4 pH value . 13 4.5.5 Chromium VI content 13 4.5.6 Colour fastness 13 4.6 Outsoles . 14 4.6.1 Thickness and cleat height 14 4.6.2 Abrasion resistance . 14 4.6.3 Hydrolysis
19、 . 15 4.6.4 Interlayer bond strength . 15 4.7 Ergonomics . 15 4.8 Transverse rigidity of the whole footwear . 15 4.9 Insole construction 15 4.10 Insole and insock 15 4.10.1 General . 15 4.10.2 Abrasion resistance . 15 4.10.3 pH value . 17 4.10.4 Chromium VI content 17 5 Optional requirements . 17 5.
20、1 Impact protection to the ankle and/or part of the shin . 17 5.2 Resistance to water penetration . 17 5.3 Resistance to fuel oil of outsole . 17 5.4 Slip resistance of outsole . 17 BS EN 13634:2017EN 13634:2017 (E) 3 5.5 Permeable uppers . 18 5.6 Insole/Insocks, Water absorption and desorption. 18
21、6 Test methods 18 6.1 Determination of the transverse rigidity of the footwear 18 6.1.1 Principle . 18 6.1.2 Apparatus. 18 6.1.3 Test piece . 18 6.1.4 Preparation of the test piece . 18 6.1.5 Test procedure . 18 6.2 Impact energy protection of ankle and shin . 19 6.2.1 Principle . 19 6.2.2 Apparatus
22、. 19 6.2.3 Test piece . 20 6.2.4 Zones of protection . 20 6.2.5 Procedure 21 7 Marking . 21 8 Wearer information and instructions for use 23 Annex A (normative) Ergonomic and size testing 24 A.1 Principle . 24 A.2 Assessors 24 A.3 Procedure for footwear size verification . 24 A.4 Procedure for ergon
23、omic evaluation . 24 Annexe ZA (informative) Relationship between this European Standard and the essential requirements of EU Directive 89/686/EEC Personal Protective Equipment aimed to be covered 26 Bibliography 28 BS EN 13634:2017EN 13634:2017 (E) 4 European foreword This document (EN 13634:2017)
24、has been prepared by Technical Committee CEN/TC 161 “Foot and leg protectors”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2018, and conflicting n
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- EN136342017PROTECTIVEFOOTWEARFORMOTORCYCLERIDERSREQUIREMENTSANDTESTMETHODSPDF

链接地址:http://www.mydoc123.com/p-1311997.html