1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Protective footwear for motorcycle riders - Requirements and test methodsBS EN 13634:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13634 December 2017 ICS 13.340.50 Supersedes EN 13634:2015English Version Pro
2、tective footwear for motorcycle riders - Requirements and test methods Chaussures de protection pour motocyclistes - Exigences et mthodes dessai Schutzschuhe fr Motorradfahrer - Anforderungen und Prfverfahren This European Standard was approved by CEN on 27 September 2017. CEN members are bound to c
3、omply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENE
4、LEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
5、 same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo
6、urg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1
7、040 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13634:2017 ENational forewordThis British Standard is the UK implementation of EN 13634:2017. It supersedes BS EN 13634:2015, which is withdrawn.The UK participation
8、 in its preparation was entrusted to Technical Committee PH/1, Safety, protective and occupational footwear.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users
9、 are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 96480 0ICS 13.340.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of t
10、he Standards Policy and Strategy Committee on 31 January 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 13634:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13634 December 2017 ICS 13.340.50 Supersedes EN 13634:2015English Version Protective foot
11、wear for motorcycle riders - Requirements and test methods Chaussures de protection pour motocyclistes - Exigences et mthodes dessai Schutzschuhe fr Motorradfahrer - Anforderungen und Prfverfahren This European Standard was approved by CEN on 27 September 2017. CEN members are bound to comply with t
12、he CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manageme
13、nt Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status
14、 as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
15、Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
16、 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13634:2017 EBS EN 13634:2017EN 13634:2017 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 6 4 Basic require
17、ments for motorcycle footwear . 7 4.1 General 7 4.2 Design 7 4.2.1 Height of upper 7 4.2.2 Whole upper . 10 4.3 Whole footwear . 10 4.3.1 bond strength 10 4.3.2 Innocuousness . 10 4.4 Uppers 10 4.4.1 pH value . 10 4.4.2 Chromium VI content 10 4.4.3 Colour fastness 10 4.4.4 Impact Abrasion resistance
18、 10 4.4.5 Impact cut resistance 12 4.5 Linings 13 4.5.1 General . 13 4.5.2 Tear strength . 13 4.5.3 Abrasion resistance . 13 4.5.4 pH value . 13 4.5.5 Chromium VI content 13 4.5.6 Colour fastness 13 4.6 Outsoles . 14 4.6.1 Thickness and cleat height 14 4.6.2 Abrasion resistance . 14 4.6.3 Hydrolysis
19、 . 15 4.6.4 Interlayer bond strength . 15 4.7 Ergonomics . 15 4.8 Transverse rigidity of the whole footwear . 15 4.9 Insole construction 15 4.10 Insole and insock 15 4.10.1 General . 15 4.10.2 Abrasion resistance . 15 4.10.3 pH value . 17 4.10.4 Chromium VI content 17 5 Optional requirements . 17 5.
20、1 Impact protection to the ankle and/or part of the shin . 17 5.2 Resistance to water penetration . 17 5.3 Resistance to fuel oil of outsole . 17 5.4 Slip resistance of outsole . 17 BS EN 13634:2017EN 13634:2017 (E) 3 5.5 Permeable uppers . 18 5.6 Insole/Insocks, Water absorption and desorption. 18
21、6 Test methods 18 6.1 Determination of the transverse rigidity of the footwear 18 6.1.1 Principle . 18 6.1.2 Apparatus. 18 6.1.3 Test piece . 18 6.1.4 Preparation of the test piece . 18 6.1.5 Test procedure . 18 6.2 Impact energy protection of ankle and shin . 19 6.2.1 Principle . 19 6.2.2 Apparatus
22、. 19 6.2.3 Test piece . 20 6.2.4 Zones of protection . 20 6.2.5 Procedure 21 7 Marking . 21 8 Wearer information and instructions for use 23 Annex A (normative) Ergonomic and size testing 24 A.1 Principle . 24 A.2 Assessors 24 A.3 Procedure for footwear size verification . 24 A.4 Procedure for ergon
23、omic evaluation . 24 Annexe ZA (informative) Relationship between this European Standard and the essential requirements of EU Directive 89/686/EEC Personal Protective Equipment aimed to be covered 26 Bibliography 28 BS EN 13634:2017EN 13634:2017 (E) 4 European foreword This document (EN 13634:2017)
24、has been prepared by Technical Committee CEN/TC 161 “Foot and leg protectors”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2018, and conflicting n
25、ational standards shall be withdrawn at the latest by June 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13634:20
26、15. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Th
27、e following significant technical changes have been introduced in comparison with the former edition EN 13634:2015: a) the requirement for an overall performance level has been removed and the associated user information requirement amended accordingly; b) the marking requirement has been changed wi
28、th an additional mandatory marking number for the upper height; c) Table 3 has been revised to include an additional column for H1 requirements; d) the sampling requirements have been clarified in 4.4.4 and 4.4.5; e) Annex B (informative) has been replaced by a note in 4.1; f) clarification of the “
29、assessor” has been included in Annex A. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yug
30、oslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13634:2017EN 13634:2017 (E) 5 Int
31、roduction Motorcyclists footwear is intended to give a degree of mechanical protection to the foot, optionally the ankle and/or part of the shin in accidents without significantly reducing the ability of the rider to control the motorcycle and operate the foot controls. The particular hazards in mot
32、orcycle accidents are abrasion with the road surface plus impacts with the motorcycle, conflicting vehicles, road furniture and road surfaces. Road surface injuries are worse when the foot is trapped under the motorcycle during sliding impacts. The standard sets out a number of basic requirements co
33、nsidered essential for this type of footwear including a number of ergonomic requirements. This European Standard includes several properties which have two performance levels in terms of the protection afforded. These cover the degree of risk or hazard that a motorcyclist will face in terms of the
34、type of riding and the nature of the accident. Where riders feel that their riding style or sport exposes them to an increased accident risk Level 2 of each of these performance features offers increased performance. However it is likely that this higher performance level has an increased penalty fo
35、r the weight and comfort so may not be acceptable to all riders. BS EN 13634:2017EN 13634:2017 (E) 6 1 Scope This European Standard applies to protective footwear for motorcycle riders for use while riding motorcycles for on or off road activities. It specifies the requirements for protection, ergon
36、omic characteristics, innocuousness, mechanical properties, marking and information for users. It also specifies the appropriate test methods. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. F
37、or dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1621-1, Motorcyclists protective clothing against mechanical impact - Part 1: Motorcyclists limb joint impact protectors - Requirements an
38、d test methods EN 13595-2:2002, Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2: Test method for determination of impact abrasion resistance EN 13595-4:2002, Protective clothing for professional motorcycle riders - Jackets, trousers
39、and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance EN ISO 4045, Leather - Chemical tests - Determination of pH (ISO 4045) EN ISO 11642, Leather - Tests for colour fastness - Colour fastness to water (ISO 11642) EN ISO 17075-1, Leather - Chemical determina
40、tion of chromium(VI) content in leather - Part 1: Colorimetric method (ISO 17075-1) EN ISO 17075-2, Leather - Chemical determination of chromium(VI) content in leather - Part 2: Chromatographic method (ISO 17075-2) EN ISO 20344:2011, Personal protective equipment - Test methods for footwear (ISO 203
41、44:2011) EN ISO 20345:2011, Personal protective equipment - Safety footwear (ISO 20345:2011) ISO 4649:2017, Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum device ISO 5423:1992, Moulded plastics footwear Lined or unlined polyurethane boots f
42、or general industrial use Specification 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 optional requirement additional requirement(s) claimed by the footwear manufacturer and associated with a specific marking BS EN 13634:2017EN 13634:2017 (
43、E) 7 4 Basic requirements for motorcycle footwear 4.1 General The minimum number of samples to be tested in order to check compliance with the requirements specified in this standard is detailed in Table 1. Unless otherwise specified, all samples shall be conditioned and tested in an environment of
44、(23 2) C and (50 5) % rh (relative humidity). This standard defines 4 specific properties for motorcycle footwear with 2 possible performance level (height of the upper, impact abrasion, impact cut, transverse rigidity). To comply with this European Standard, the motorcycle footwear shall achieve at
45、 least performance level 1 for all four properties. For each of the required measurements performed in accordance with this standard, a corresponding estimate of the uncertainty of measurement should be evaluated. One of the following approaches should be used: - a statistical method, e.g. that give
46、n in ISO 5725-2 2; - a mathematical method, e.g. that given in ISO/IEC Guide 98-3 3; - uncertainty and conformity assessment as given in ISO/IEC Guide 98-4 4; - JCGM 100:20081. 4.2 Design 4.2.1 Height of upper All footwear shall be classified as either performance level 1 or performance level 2: Per
47、formance level 1: Footwear shall meet the minimum upper height requirements in accordance with Table 2. Performance level 2: Footwear shall meet the minimum upper height requirements in accordance with Table 3. BS EN 13634:2017EN 13634:2017 (E) 8 Table 1 Minimum number of samples and test specimens
48、and their origin Property Clause Samples Take test specimens only from footwear Height of the upper 4.2.1 One pair in each of 3 sizes YES Upper/outsole bond strength 4.3.1 One shoe in each of 3 sizes YES Upper pH value 4.4.1 One sample only of each leather NO Upper Chromium VI content 4.4.2 One samp
49、le only of each leather NO Upper Colour Dye fastness 4.4.3 One sample only of each material NO Upper impact abrasion resistance 4.4.4 One sample from each combination of material NO Upper Impact cut resistance 4.4.5 One sample from each combination of material NO Lining Tear strength 4.5.2 One sample only of each material NO Lining Abrasion resistance 4.5.3 One sample only of each material NO Lining pH value 4.5.4 One sample only of each leather NO Lining Chromium VI content 4.5.5 One sample only of each leather NO Lining colour fas
