IEEE 802 21 1-2017 en Local and metropolitan area networks - Part 21 1 Media Independent Services (IEEE Computer Society).pdf

《IEEE 802 21 1-2017 en Local and metropolitan area networks - Part 21 1 Media Independent Services (IEEE Computer Society).pdf》由会员分享，可在线阅读，更多相关《IEEE 802 21 1-2017 en Local and metropolitan area networks - Part 21 1 Media Independent Services (IEEE Computer Society).pdf（211页珍藏版）》请在麦多课文档分享上搜索。

1、 Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 802.21.1-2017 IEEE Standard for Local and metropolitan area networks Part 21.1: Media Independent Services IEEE Std 802.21.1-2017 IEEE Standard for Local and metropolitan area

2、networks Part 21.1: Media Independent Services Sponsor LAN/MAN Standards Committee of the IEEE Computer Society Approved 14 February 2017 IEEE-SA Standards Board Abstract: Several use cases and services are defined, namely, handover between heterogeneous networks, home energy management system, soft

3、ware-defined radio access networks (SDRANs), radio resource management (RRM), and device-to-device (D2D) communication service that need to be implemented in conjunction with the media independent services (MIS) framework as specified in IEEE Std 802.21-2017. Keywords: home energy management system,

4、 IEEE 802, IEEE 802.21, IEEE 802.21.1, media independent handover, media independent service, mobile node, mobility, network-assisted device-to-device communication, point of attachment, point of services, radio resource management, seamless, software-defined radio access network, use case The Insti

5、tute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 7 April 2017. Printed in the United States of America. IEEE and 802 are registered trademarks in

6、 the U.S. Patent marks of W3C are registered and held by its host institutions MIT, ERCIM, Keio, and Beihang. Wi-Fi and Wi-Fi Direct are registered trademarks of the Wi-Fi Alliance. WiMAX and WiMAX Forum are trademarks or registered trademarks of the WiMAX Forum. PDF: ISBN 978-1-5044-3706-6 STD22402

7、 Print: ISBN 978-1-5044-3707-3 STDPD22402 IEEE prohibits discrimination, harassment, and bullying. For more information, visit http:/www.ieee.org/web/aboutus/whatis/policies/p9-26.html. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without

8、 the prior written permission of the publisher. Copyright 2017 IEEE. All rights reserved. 2 Important Notices and Disclaimers Concerning IEEE Standards Documents IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a referenc

9、e to this page, appear in all standards and may be found under the heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. Notice and Disclaimer of Liability Concerning

10、 the Use of IEEE Standards Documents IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”) Standards Board. IEEE (“the Institute

11、”) develops its standards through a consensus development process, approved by the American National Standards Institute (“ANSI”), which brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE Standards are documents developed through scientific, ac

12、ademic, and industry-based technical working groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE

13、does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure against interference with or from other dev

14、ices or networks. Implementers and users of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. IEEE does not warrant or represent the accur

15、acy or content of the material contained in its standards, and expressly disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose;

16、 non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly volu

17、ntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subje

18、ct to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undert

19、aking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professiona

20、l in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS I

21、NTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER

22、 SUCH DAMAGE WAS FORESEEABLE. Copyright 2017 IEEE. All rights reserved. 3 Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approv

23、ed IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied

24、upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments o

25、n standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be

26、in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and t

27、he members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would lik

28、e to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents s

29、hould consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEE

30、E does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made

31、 available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for u

32、se and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Copyright 2017 IEEE. All rights reserved. 4 Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of an

33、y individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions

34、 of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be a

35、mended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least e

36、very ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest e

37、dition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more

38、 information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are enco

39、uraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validit

40、y of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indi

41、cate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claim

42、s may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or condi

43、tions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is en

44、tirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Copyright 2017 IEEE. All rights reserved. 5 Participants During development of this IEEE standard, the Media Independent Handover Services Working Group had the following officers: Subir Das, Ch

45、air Hyeong Ho Lee, Vice Chair Yoshikazu Hanatani, Technical Editor At the time this IEEE standard was completed, the 802.21.1 Task Group had the following membership: Subir Das, Chair Hyeong Ho Lee, Technical Editor H. Anthony Chan Clint Chaplin Lidong Chen Jin Seek Choi Daniel Corujo Antonio De la

46、Oliva Delgado Yoshikazu Hanatani Yong-Geun Hong Sangkwon Peter Jeong Farrokh Khatibi Michael Lynch Yoshihiro Ohba Hyunho Park Charles E. Perkins Karen Randall Yusuke Shimizu Tomoki Takazoe Yuji Unagami In addition, the following members have either contributed or participated during the development

47、of this standard: Yusuke Doi Krzysztof Grochla Keiichi Teramoto Torleiv Maseng Yoichi Masuda Christian Niephaus Naoki Ogura Dick Roy Ruben Salazar Randy Turner The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or a

48、bstention. Thomas Alexander Butch Anton William Byrd Juan Carreon Charles Cook Daniel Corujo Subir Das Sourav Dutta Richard Edgar Marc Emmelmann Avraham Freedman Joel Goergen Randall Groves Yoshikazu Hanatani Werner Hoelzl David Howard Noriyuki Ikeuchi Atsushi Ito Raj Jain Piotr Karocki Stuart Kerry

49、 Farrokh Khatibi Yongbum Kim Thomas Kurihara Hyeong Ho Lee Jae Seung Lee Moon-Sik Lee Michael Lynch Elvis Maculuba Stephen McCann Michael McInnis Nick S. A. Nikjoo Paul Nikolich Satoshi Oyama Arumugam Paventhan Venkatesha Prasad Karen Randall Maximilian Riegel Naotaka Sato Yusuke Shimizu Dorothy Stanley Thomas Starai Michael Stelts Walter Struppler Mark Sturza Tomoki Takazoe Patricia Thaler Mark-Rene Uchida Dmitri Varsanofiev Prabodh Varshney Oren Yuen Copyright 2017 IEEE. All rights reserved. 6 When the IEEE-SA Standards Board approved this standard on 14 February 2017, it h