IEEE 603 ERTA-2015 en Standard Criteria for Safety Systems for Nuclear Power Generating Stations《核电站安全系统准则》.pdf

《IEEE 603 ERTA-2015 en Standard Criteria for Safety Systems for Nuclear Power Generating Stations《核电站安全系统准则》.pdf》由会员分享，可在线阅读，更多相关《IEEE 603 ERTA-2015 en Standard Criteria for Safety Systems for Nuclear Power Generating Stations《核电站安全系统准则》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、10 March 2015 Product STD95956 IEEE Std 603-2009 (Revision of IEEE Std 603-1998) Errata to IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations Sponsor Nuclear Power Engineering Committee of the IEEE Power and Energy Society Correction Sheet Issued 10 March 2015 Copyright

2、2015 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 2015. Printed in the United States of America. This correction sheet may be freely reproduced and distributed in order to maintain the utility and currency of the underlying Standard. This correction s

3、heet may not be sold, licensed or otherwise distributed for any commercial purposes whatsoever. The content of this correction sheet may not be modified. 10 March 2015 Product STD95956 Under “Interdisciplinary approach,” p. iv, paragraph 2, sentence 5, the following is incorrect: “ASME Boiler and Pr

4、essure Vessel Code B5.” Revise as follows (and link the cross reference to the revised bibliography-see below): “ASME Boiler and Pressure Vessel Code B4.” Under “Evolution,” p. v, sentence 3, the following is incorrect: “This was followed by IEEE Std 279-1971 B7” Revise as follows (and link the cros

5、s reference to the revised bibliographysee below): “This was followed by IEEE Std 279-1971 B6” Under “Purpose of revision,” p. v, paragraph 2, sentence 2, the following is incorrect: “ANSI/ANS-4.5-1980 B1 and IEEE Std. . .” Revise as follows: “ANSI/ANS-4.5-1980 and IEEE Std. . .” Under “Relationship

6、 to other standards,” p. v, paragraph 3, the following is incorrect: “standard IEC 60231A (1969-01) also contains” Revise as follows (and link the cross reference to the revised bibliography see below): “standard IEC 60231A (1969-01) B5 also contains” Under “1.2 Illustration,” p. 3, NOTE 1, the foll

7、owing is incorrect: “system of IEEE Std 279-1971 B7 and of this standard” Revise as follows (and link the cross reference to the revised bibliographysee below): “system of IEEE Std 279-1971 B6 and of this standard” Under “3. Definitions,” p. 9, NOTE 2, the following is incorrect: “Nuclear Society (A

8、NS) and IEC 60231A (1969-01) B6.” Revise as follows (and link the cross reference to the revised bibliographysee below): 10 March 2015 Product STD95956 “Nuclear Society (ANS) and IEC 60231A (1969-01) B5.” Under “8.2 Non-electrical power sources,” p. 20, sentence 3, the following is incorrect: “(See

9、ANSI/ANS 59.3-1992 B3 and ANSI/ANS-59.51-1997 B4).” Revise as follows (and link the cross reference to the revised bibliographysee below): “(See ANSI/ANS 59.3-1992 B2 and ANSI/ANS-59.51-1997 B3).” Under “Bibliography,” p. 36, the following entries B1 through B7, and the footnotes are incorrect: B1 A

10、NSI/ANS-4.5-1980 (Reaff 1988), Criteria for Accident Monitoring Functions in Light-Water-Cooled Reactors.”13B2 ANSI/ANS-58.9-1981 (Reaff 2009), Single-Failure Criteria for Light Water Reactor Safety-Related Fluid Systems. B3 ANSI/ANS-59.3-1992 (Reaff 2002), Nuclear Safety Criteria for Control Air Sy

11、stems. B4 ANSI/ANS-59.51-1997 (Reaff 2007), Fuel-Oil Systems for Emergency Diesel Generators. B5 ASME, Boiler and Pressure Vessel Code, 2007 Edition.14B6 IEC 60231A (1969-01), First Supplement to General Principles of Nuclear Reactor Instrumentation.15B7 IEEE Std 279-1971 (Reaff 1978), IEEE Standard

12、 Criteria for Protection Systems for Nuclear Power Generating Stations.16 13 ANSI publications are available from the Customer Service Department, American National Standards Institute, 25 W. 43rd Street, 4th Floor, New York, NY 10036, USA (http:/www.ansi.org/). 14 ASME publications are available fr

13、om the American Society of Mechanical Engineers, 3 Park Avenue, New York, NY 10016-5990, USA (http:/www.asme.org/). 15 IEC publications are available from the Central Office of the International Electrotechnical Commission, 3, rue de Varemb, P.O. Box 131, CH-1211, Geneva 20, Switzerland (http:/www.i

14、ec.ch/). IEC publications are also available in the United States from the Sales Department, American National Standards Institute, 25 West 43rd Street, 4th Floor, New York, NY 10036, USA (http:/www.ansi.org/). 16 IEEE Std 279-1971 has been withdrawn; however, copies can be obtained from Global Engi

15、neering, 15 Inverness Way East, Englewood, CO 80112-5704, USA, tel. (303) 792-2181 (http:/ Replace entries B1 through B7 and footnotes; with entries B1 and B2 and footnotes as follows: B1 ANSI/ANS-58.9-1981 (Reaff 2009), Single-Failure Criteria for Light Water Reactor Safety-Related Fluid Systems.13

16、B2 ANSI/ANS-59.3-1992 (Reaff 2002), Nuclear Safety Criteria for Control Air Systems. 10 March 2015 Product STD95956 B3 ANSI/ANS-59.51-1997 (Reaff 2007), Fuel-Oil Systems for Emergency Diesel Generators. B4 ASME, Boiler and Pressure Vessel Code, 2007 Edition.14 B5 IEC 60231A (1969-01), First Suppleme

17、nt to General Principles of Nuclear Reactor Instrumentation.15 B6 IEEE Std 279-1971 (Reaff 1978), IEEE Standard Criteria for Protection Systems for Nuclear Power Generating Stations.1613 ANSI publications are available from the Customer Service Department, American National Standards Institute, 25 W

18、. 43rd Street, 4th Floor, New York, NY 10036, USA (http:/www.ansi.org/). 14 ASME publications are available from the American Society of Mechanical Engineers, 3 Park Avenue, New York, NY 10016-5990, USA (http:/www.asme.org/). 15 IEC publications are available from the Central Office of the Internati

19、onal Electrotechnical Commission, 3, rue de Varemb, P.O. Box 131, CH-1211, Geneva 20, Switzerland (http:/www.iec.ch/). IEC publications are also available in the United States from the Sales Department, American National Standards Institute, 25 West 43rd Street, 4th Floor, New York, NY 10036, USA (http:/www.ansi.org/). 16 IEEE Std 279-1971 has been withdrawn; however, copies can be obtained from Global Engineering, 15 Inverness Way East, Englewood, CO 80112-5704, USA, tel. (303) 792-2181 (http:/