IEEE 1856-2017 en Framework for Prognostics and Health Management of Electronic Systems.pdf

《IEEE 1856-2017 en Framework for Prognostics and Health Management of Electronic Systems.pdf》由会员分享，可在线阅读，更多相关《IEEE 1856-2017 en Framework for Prognostics and Health Management of Electronic Systems.pdf（31页珍藏版）》请在麦多课文档分享上搜索。

1、IEEE Standard Framework for Prognostics and Health Management of Electronic Systems IEEE Std 1856-2017 IEEE Reliability Society Sponsored by the Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std 1856-2017 IEEE Standard Framework for Prognostics and Health Management of Elect

2、ronic Systems Sponsor Standards Committee of the IEEE Reliability Society Approved 7 September 2017 IEEE-SA Standards BoardAbstract: Information for the implementation of prognostics and health management (PHM) for electronic systems is described in this standard. A normative framework for classifyi

3、ng PHM capability and for planning the development of PHM for an electronic system or product is also described in this standard. Manufacturers and end users can use this standard for planning the appropriate prognostics and health management techniques to implement and the associated life cycle ope

4、rations for the system of interest. Keywords: classi cation of electronics, electronic systems, health management, IEEE 1856, implementation in electronics, PHM de nitions, PHM functional model, PHM Metrics, PHM operational model, prognostics The Institute of Electrical and Electronics Engineers, In

5、c. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 13 December 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; n

6、on-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly volunt

7、ary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject

8、 to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertak

9、ing to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional

10、in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INT

11、ERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER S

12、UCH DAMAGE W AS FORESEEABLE.4 Copyright 2017 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved

13、 IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied up

14、on as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on

15、standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in

16、 the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the

17、 members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like

18、to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents sho

19、uld consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE

20、does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made a

21、vailable by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use

22、 and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any i

23、ndividual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of

24、 any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amen

25、ded from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least ever

26、y 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest editio

27、n of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more

28、information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. User

29、s are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence

30、or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters o

31、f Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Es

32、sential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any lice

33、nsing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement o

34、f such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this IEEE standard was completed, the Prognostics and Health Management of Electronic Systems Working Grou

35、p had the following membership: Michael Pecht, Chair Sony Mathew, Vice Chair Louis J. Gullo, Sponsor Chair N. Jordan Jameson, Secretary Arvind Sai Sarasi Vasan, Associate Secretary Vivek Agarwal Hans-Jrgen Albrecht Allegra Alessi Michael Azarian Chris Bailey Eric R. Bechhoefer Randy Bickford Gautam

36、Biswas Yizhak Bot Michael Boyd Jos R. Celaya Ian Chan Joseph Childs Tommy Chow Jaesik Chung Kuan-Jung (Kenny) Chung Steve Clay Jamie Coble Eduardo Cota Sreerupa Das Darryl N. Davis Luiz Gonzaga de Souza Ribeiro Pierre Dersin Nishkamraj Deshpande Walter Fenk Lorraine M. Fesq Nick Frankle Peter Ghavam

37、i Kirk Gray Ed Habtour Qian Han Herbert Hect V esa Hekkala Luis Hernandez Andrew Hess Wesley Hines Dennis Hoffman Stephen B. Johnson Suk Joo Bae Kwang Jung David A. Karpuszka Zoubir Khatir Chetan Kulkarni Manoj Kumar Ranjith Kumar Pradeep Lall Jack Lam Benjamin Lamoureux Jean-Baptiste Leger Anatoli

38、Lisnianski Jie Liu Zheng Liu Huitian Lu Tom Martin Jean-Remi Masse Leopoldo M. Mayoral Paulo Mendes Andreas Middendorf Chandru Mirchandani Nilimb Misal Subrat Nanda Kurt N. Ochsie Krishna Patapati Prakash Patnaik Suresh Perinpanayagam Cheng Qi Dev Raheja Pradeep Ramuhalli Mike Roellig Richard Rusaw

39、Rex Sallade Peter Sandborn Abhinav Saxena Fred Schenkelberg Michael Schumacher Brian Seal Peck Seng Chua Hongbin Shi Shubhangi Shrikhande Michael Sievers Jane Smith Ben Sykes Chuck Thomas Jason Thomas V anam Upendranath P .V . V arde Jin Wang Pingfeng Wang Daniel J Weyer Juergen Wilde Andrew Wileman

40、 Timothy J. Wilmering Weizhong Y an David Y ellamati Sun Y ongquan The following members of the balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Robert Aiello Johann Amsenga Charles Barest Vizhak Bot Bill Brown Susan Burgess Juan Carreon Joseph Childs Keith Chow Mark Davis Nicolas Degrenne Richard Doyle David Droste Donald Dunn Sourav Dutta Fredric Friend David Fuschi Allan Gillard Eric W . Gray Randall Groves Louis J. Gullo Werner Hoelzl Peng Hu Noriyuki Ikeuchi Atsushi Ito Kenneth Karg Piotr Karocki