IEEE 1851-2012 en Design Criteria of Integrated Sensor-Based Test Applications for Household Appliances (IEEE Computer Society)《基于集成传感器测试应用的家用电器设计准则IEEE标准》.pdf

《IEEE 1851-2012 en Design Criteria of Integrated Sensor-Based Test Applications for Household Appliances (IEEE Computer Society)《基于集成传感器测试应用的家用电器设计准则IEEE标准》.pdf》由会员分享，可在线阅读，更多相关《IEEE 1851-2012 en Design Criteria of Integrated Sensor-Based Test Applications for Household Appliances (IEEE Computer Society)《基于集成传感器测试应用的家用电器设计准则IEEE标准》.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、 IEEE Standard for Design Criteria of Integrated Sensor-Based Test Applications for Household Appliances Sponsored by the Test Technology Committee and TC-9Sensor Technology Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 15 August 2012 IEEE Computer Society and IEEE Instrumentation and Mea

2、surement Society IEEE Std 1851-2012IEEE Std 1851-2012 IEEE Standard for Design Criteria of Integrated Sensor-Based Test Applications for Household Appliances IEEE Computer Society and IEEE Instrumentation and Measurement Society Sponsored by the Test Technology Committee and TC-9Sensor Technology Co

3、mmittee Approved 8 June 2012 IEEE-SA Standards Board Abstract: An integrated framework of the test software for household appliances is defined. This standard specifies the test environment and the test information as well as the means to acquire the information (either Web services or a data-exchan

4、ge file). Keywords: household appliances test, IEEE 1851, sensor data, Web service, XML schema The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2012 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Pu

5、blished 15 August 2012. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Notice to users L

6、aws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or r

7、eferring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made availabl

8、e for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption by public authoriti

9、es and private users, the IEEE does not waive any rights in copyright to this document. Updating of IEEE documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issu

10、ance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it has been

11、amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/standards.ieee.org/index.html or contact the IEEE at the address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit IEEE-SA

12、 Website at http:/standards.ieee.org/index.html. Errata Errata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possi

13、bility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has

14、 filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights w

15、ithout compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Copyright 2012 IEEE. All rights reserved. ivCopyright 2012 IEEE. All rights reserved. vEssential Patent Claims m

16、ay exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditio

17、ns provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entir

18、ely their own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the time this IEEE standard was completed, the Test Technology for Household Appliances Working Group had the following membership: Zhongwen Guo, Chair Ting Liu, Hao Zhang, Vice Cha

19、irs Pengpeng Chen Xiaomei Chi Wenbo Cui Ruixiang Dai Yuan Feng Xiang Gao Qiaoqian Guan Xu Guan T. Aaron Gulliver Qiang Guo Ying Guo Feng Hong Keyong Hu Naijun Hu Mingxing Jiang Yongguo Jiang Kang Lee Gongxiang Li Minglu Li Xiangyang Li Zhengbao Li Chang Liu Chao Liu Shiyong Liu Xiangzhi Liu Xiaodong

20、 Liu Yunhao Liu Zhaoxiang Liu Hanjiang Luo Hongyang Ma Xiaochun Pan Haipeng Qu Mike Seavey Changjiang Shi Runli Shi Eugene Song Limin Sun Yizi Sun Zhaosui Sun Youqiang Tian Feng Wang Xi Wang Zhengzhuang Wang Nuo Wei Xiaoming Wu Hong Xu Lifeng Yang Fatao Zhang Jianhua Zhang Yan Zhao Bing Zheng Xiaohu

21、a Zheng Xinyun Zhou The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. William J. Ackerman Hu Bo William Byrd Lei Chen Meng Chen Pengpeng Chen Jidong Du Hongqing Gai Chris Gorringe Randall C. Groves Q

22、iang Guo Bin Han Yuan He Xuan Hong Mitsuru Iwaoka Jaehoon Jeong Runhai Jiao Wu Kaishun Piotr Karocki Changqin Li Xiangxue Li Bin Liu Xiaodong Liu Xiaolei Liu Greg Luri Wayne Manges Bansi Patel Bartien Sayogo Mike Seavey Zhang Sheng Walter Struppler Rikai Su John Vergis Dongming Wang Guofeng Wang Lei

23、 Wang Wei Wang Xulie Wang Yang Wang Mi Wen Meng Xiaingyan Guangtao Xue Zhenying Yang Zhonghua Yao Jiadi Yu Jing Yu Yang Yuan Peilun Zang Guangxu Zhang Lijing Zhang Weifeng Zhang Haiyong Zheng Daidi Zhong Copyright 2012 IEEE. All rights reserved. viWhen the IEEE-SA Standards Board approved this stand

24、ard on 8 June 2012, it had the following membership: Richard H. Hulett, Chair John Kulick, Vice Chair Robert M. Grow, Past Chair Satish Aggarwal Masayuki Ariyoshi Peter Balma William Bartley Ted Burse Clint Chaplin Wael Diab Jean-Philippe Faure Alexander Gelman Paul Houz Jim Hughes Young Kyun Kim Jo

25、seph L. Koepfinger* David J. Law Thomas Lee Hung Ling Oleg Logvinov Ted Olsen Gary Robinson Jon Walter Rosdahl Mike Seavey Yatin Trivedi Phil Winston Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Jane

26、zic, NIST Representative Julie Alessi IEEE Standards Program Manager, Document Development Kathryn Bennett IEEE Standards Program Manager, Technical Program Development Copyright 2012 IEEE. All rights reserved. viiIntroduction This introduction is not part of IEEE Std 1851-2012, IEEE Standard for De

27、sign Criteria of Integrated Sensor-Based Test Applications for Household Appliances. Quality control is an essential part throughout the household appliance manufacturing process. The appliance manufacturer performs various tests for the household appliances. Most of the tests are completed by the t

28、est systems in multiple test laboratories distributed over a wide geographic area. The test systems include three parts: instruments equipped with sensors, computers, and sensor-based test application. The test application part is responsible for automatically collecting, managing, analyzing, and pr

29、esenting the data for the users, which is viewed as the backbone of the test systems. Due to the lack of the development criterion of test applications for household appliances, there exist many problems, such as integration problems, reusability problems of software module, systems interoperability

30、 problems, and exchange problems of test electronic documents. Specifically, for some government supervision departments, it affects the supervision efficiency due to multiple data formats, multiple test types, diverse measurement systems, and limited human resources. For the product manufacturing e

31、nterprises, it leads to low measurement and management efficiency. For the test software development corporations, it brings low development efficiency, huge costs, long cycles, and waste of manpower resources. This document provides the standard format of testing data of household appliances, which

32、 makes it easier for users from different enterprises, including product supervisors of government, to read and exploit such kinds of data. This standard also provides the system framework and a set of Web services like testing data transforming and transferring, which are the basis for software eng

33、ineers to develop integrated testing applications. This standard plays a very important role in improving the supervising efficiency of government departments, the quality management efficiency of the manufacturing enterprises, and the test software development efficiency of software development cor

34、porations. Copyright 2012 IEEE. All rights reserved. viiiContents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 1.3 Users 2 1.4 Conventions used within this document 2 2. Definitions, acronyms, and abbreviations 2 2.1 Definitions . 2 2.2 Acronyms and abbreviations . 3 3. System framework 4 3.1 Architect

35、ure . 4 3.2 Workflow. 6 4. Test environment and test information. 7 4.1 TestEnvironment.xsd. 7 4.2 TestInformation.xsd. 12 5. File format of test data 19 5.1 General 19 5.2 TestEnvironment file . 19 5.3 TestInformation file. 19 6. Web service interface . 23 6.1 getSupportedLanguage (mandatory) 23 6.

36、2 getMaxDataQuantity(mandatory) 24 6.3 getInputItem (mandatory) 25 6.4 getLaboratoryInfo (mandatory) . 26 6.5 getTestMetaDataNum (optional) . 28 6.6 getTestMetaData (mandatory) . 29 6.7 getSensorMetaData (mandatory) . 32 6.8 getTestData (mandatory) . 34 6.9 getSensorofKeyParameter (optional). 35 6.1

37、0 Exceptions . 36 Annex A (informative) TestEnvironment instance documents (.XML files) . 38 Annex B (informative) TestInformation instance documents (.NC files). 40 Annex C (informative) Bibliography 42 Copyright 2012 IEEE. All rights reserved. ixIEEE Standard for Design Criteria of Integrated Sens

38、or-Based Test Applications for Household Appliances IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers of IEEE Standards documents are responsible for d

39、etermining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear

40、in all publications containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. 1. Overview This standard wa

41、s developed to serve as a design criteria for integrated sensor-based test applications for household appliances. It specifies the system integration framework, describes test information format, and provides two means to acquire the information via Web service interfaces and data-exchange files. 1.

42、1 Scope This standard defines the integrated framework of the test software for household appliances oriented to the data from intelligent sensors, including system framework, interfaces of Web services, and data exchange formats, which can be divided as: (1) The system framework to integrate the di

43、stributed test applications; (2) The description of appliance test environment and test information, including the metadata of the whole test application, the metadata of the appliance to be tested, the metadata of the sensors, and the sensor data; (3) The file format of test data to be exchanged am

44、ong distributed test applications; (4) The Web services to transform and transfer monitored data. 1.2 Purpose This standard defines the file format of test data from household appliances and the Web services that enable the exchange of such test data. Implementation of this standard solves the inter

45、operability and Copyright 2012 IEEE. All rights reserved. 1IEEE Std 1851-2012 IEEE Standard for Design Criteria of Integrated Sensor-Based Test Applications for Household Appliances integration problems for building test applications for household appliances as well as the problems related to the ex

46、change of test data. 1.3 Users Anticipated users of the standard include the following: a) Household appliance test application developer b) Household appliance research and development staff c) Household appliance testing laboratory assistant d) Household appliance enterprise manager e) Government

47、quality control staff 1.4 Conventions used within this document This standard presents an integrated framework of the test application for household appliances, specifying test environment and test information. This standard uses the vocabulary and definitions of relevant IEEE standards. In case of

48、conflict of definitions, except for those portions quoted from standards, the following precedence shall be observed: (1) Clause 2, (2) Annex C, and (3) the IEEE Standards Dictionary Online. The format and terminology standards follow IEEE Standards Style Manual B1.12. Definitions, acronyms, and abb

49、reviations 2.1 Definitions For the purposes of this document, the following terms and definitions apply. The IEEE Standards Dictionary Online should be consulted for terms not defined in this clause.2element: A bounded component of the logical structure of an eXtensible Markup Language (XML) document that has a type and that may have XML attributes and content. NOTEAdapted from W3C Recommendation B7).3,4eXtensible Markup Language (XML) attribute: Name-value pair associated with an XML element. input item: A set of items whose contents are the metadata that