IEEE 1613 INT 1-2010 en Environmental and Testing Requirements for Communications Networking Devices Installed in Electrical Power Substations《IEEE Std 1613 -20.pdf

《IEEE 1613 INT 1-2010 en Environmental and Testing Requirements for Communications Networking Devices Installed in Electrical Power Substations《IEEE Std 1613 -20.pdf》由会员分享，可在线阅读，更多相关《IEEE 1613 INT 1-2010 en Environmental and Testing Requirements for Communications Networking Devices Installed in Electrical Power Substations《IEEE Std 1613 -20.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、IEEE Standards Interpretations for IEEE Std 1613 -2009IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electrical Power Substations Copyright 2010 by the Institute of Electrical and Electronics Engineers, Inc. Three Park Avenue New York, New Yor

2、k 10016-5997 USA All Rights Reserved. This is an interpretation of IEEE Std 1613-2009. Interpretations are issued to explain and clarify the intent of a standard and are not intended to constitute an alteration to the original standard or to supply consulting information. Permission is hereby grante

3、d to download and print one copy of this document. Individuals seeking permission to reproduce and/or distribute this document in its entirety or portions of this document must contact the IEEE Standards Department for the appropriate license. Use of the information contained in this document is at

4、your own risk. IEEE Standards Department Copyrights and Permissions 445 Hoes Lane, P. O. Box 1331 Piscataway, New Jersey 08855-1331, USA July 2010 Interpretation Number 1: Topic: Clause 3.1 Interpretation Request #1 The technical point breaks the temperature ranges down into 4 categories A,B,C, & D.

5、 Can you please identify what the ranges are for? Do the ranges fall into different acceptance approvals like in Clause 7.7 and Clause 7.8, with Class 1 or 2? Interpretation Response #1 Page 1 of 2IEEE Std 1613-20097/2/2010mhtml:file:/A:AcquisitionIEEE Errata, IEEE Intp & NESC Intp070220101613-2009_

6、IN.The temperature ranges a), b), and d) cited in 3.1.1 and 3.1.2 in IEEE Std 1613-2009 are to allow a manufacturer options in specifying the temperature ranges for its product. If no selection is made by a manufacturer who otherwise claims compliance with IEEE Std 1613-2009, the default ranges are

7、as specified in 3.1.1 c) and 3.1.2 c). From a testing perspective for SWC, RFI or ESD, the only linkage is to 4.1.1. There is no linkage of the Clause 3 temperature ranges to Clause 6, Clause 7, Clause 8, or Clause 9, as the tests in those clauses are conducted at ambient temperature. With the next

8、revision, we will correct 7.9 changing it to read “ .in accordance with 5.1” (instead of the present “4.1”, which is an error). Then it will be clear that all the tests in Clause 6, Clause 7, Clause 8 and Clause 9 are to be conducted at a test facilitys ambient conditions. Back to Available IEEE Standards Interpretations Online Copyright IEEE-SA Contact IEEE-SA For questions or comments, please contact the IEEE-SA Webmaster. Page 2 of 2IEEE Std 1613-20097/2/2010mhtml:file:/A:AcquisitionIEEE Errata, IEEE Intp & NESC Intp070220101613-2009_IN.