IEC 60603-7-81-2015 Connectors for electronic equipment - Part 7-81 Detail specification for 8-way shielded free and fixed connectors for data transmissions wit.pdf

《IEC 60603-7-81-2015 Connectors for electronic equipment - Part 7-81 Detail specification for 8-way shielded free and fixed connectors for data transmissions wit.pdf》由会员分享，可在线阅读，更多相关《IEC 60603-7-81-2015 Connectors for electronic equipment - Part 7-81 Detail specification for 8-way shielded free and fixed connectors for data transmissions wit.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 60603-7-81 Edition 1.0 2015-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Connectors for electronic equipment Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz Connecteurs pour quipements lectroniques Partie

2、7-81: Spcification particulire pour les fiches et les embases blindes 8 voies pour la transmission de donnes des frquences jusqu 2 000 MHz IEC 60603-7-81:2015-12(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no

3、 part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC co

4、pyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite

5、ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supp

6、lmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Ele

7、ctrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure t

8、hat you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other d

9、ocuments. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn pub

10、lications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and

11、 electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entr

12、ies in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this p

13、ublication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et

14、 aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome p

15、our consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de

16、trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just

17、Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi qu

18、e les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des pub

19、lications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. 2 IEC 606

20、03-7-81:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references 8 3 Terms and definitions 9 4 Cable terminations and internal connections Fixed and free connectors . 9 5 Gauge . 9 6 Characteristics 9 6.1 General . 9 6.1.1 Overview . 9 6.1.2 Pin and pair grouping assignm

21、ent 9 6.1.3 Classification into climatic category . 9 6.2 Electrical characteristics . 10 6.2.1 General . 10 6.2.2 Transfer impedance . 10 6.3 Transmission characteristics . 10 6.3.1 General . 10 6.3.2 Insertion loss . 10 6.3.3 Return loss 10 6.3.4 Propagation delay 11 6.3.5 Delay skew 11 6.3.6 NEXT

22、 loss . 11 6.3.7 Power sum NEXT loss . 11 6.3.8 FEXT Loss . 12 6.3.9 Power sum FEXT loss . 12 6.3.10 Transverse conversion loss . 12 6.3.11 Transverse conversion transfer loss 12 6.3.12 Coupling attenuation 12 6.3.13 Power sum alien (exogenous) NEXT 13 6.3.14 Power sum alien (exogenous) FEXT 13 6.3.

23、15 Mechanical 13 6.3.16 Pin assignment 13 7 Tests and test schedule . 14 7.1 General . 14 7.2 Arrangement for contact resistance test 14 7.3 Arrangement for vibration test . 14 7.4 Test procedures and measuring methods 14 7.5 Preconditioning . 14 7.6 Wiring and mounting of specimens 14 7.6.1 Wiring

24、14 7.6.2 Mounting . 14 8 Test schedules 14 8.1 General . 14 8.2 Basic (minimum) test schedule 14 8.3 Full test schedule 14 IEC 60603-7-81:2015 IEC 2015 3 8.3.1 General . 14 8.3.2 Test group P preliminary 14 8.3.3 Test group AP . 15 8.3.4 Test group BP . 15 8.3.5 Test group CP . 15 8.3.6 Test group D

25、P . 15 8.3.7 Test group EP . 15 8.3.8 Test group FP 16 8.3.9 Test group GP . 16 Bibliography 17 Table 1 Test Group EP 15 4 IEC 60603-7-81:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT Part 7-81: Detail specification for 8-way, shielded, free and fixed

26、connectors, for data transmissions with frequencies up to 2 000 MHz FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote internati

27、onal co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter re

28、ferred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate

29、 in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an inter

30、national consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reason

31、able efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC

32、Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conform

33、ity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publicatio

34、n. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or fo

35、r costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct a

36、pplication of this publication. International Standard IEC 60603-7-81 has been prepared by subcommittee 48B: Electrical connectors, of IEC technical committee 48: Electrical connectors and mechanical structures for electrical and electronic equipment. The text of this standard is based on the follow

37、ing documents: FDIS Report on voting 48B/2451/FDIS 48B/2464/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts

38、 in the IEC 60603 series, published under the general title Connectors for electronic equipment, can be found on the IEC website. IEC 60603-7-81:2015 IEC 2015 5 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website

39、 under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 IEC 60603-7-81:2015 IEC 2015 INTRODUCTION IEC 60603-7 is the base specification of the whole series. Subsequent s

40、pecifications do not duplicate information given in the base document, but list only additional requirements. For complete specification regarding a component of a higher number document all lower numbered documents shall be considered as well. The following diagram shows the interrelation of the do

41、cuments: The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning transmission characteristics given in 6.2. Unshielded Shielded 3 MHz 100 MHz 250 MHz 600 MHz IEC 60603-7 IEC 60603

42、-7-1 IEC 60603-7-3 IEC 60603-7-4 IEC 60603-7-5 IEC 60603-7-7 500 MHz IEC 60603-7-41 IEC 60603-7-51 1 000 MHz IEC 60603-7-81 IEC 60603-7-2 2 000 MHz IEC 60603-7-71 IEC 60603-7-82 2 000 MHz Indicates reference for transmission performance (backward compatibility) Indicates reference for dimensions, me

43、chanical and electrical characteristics, tests and test schedules Key IEC IEC 60603-7-81:2015 IEC 2015 7 IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences either fre

44、e of charge or under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: CommScope INC of North Carolina 110 CommScope Place SE Hickory

45、 North Carolina USA 28602 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights. ISO (www.iso.org/patents) and IEC (http:/

46、patents.iec.ch) maintain on-line data bases of patents relevant to their standards. Users are encouraged to consult the data bases for the most up to date information concerning patents. 8 IEC 60603-7-81:2015 IEC 2015 CONNECTORS FOR ELECTRONIC EQUIPMENT Part 7-81: Detail specification for 8-way, shi

47、elded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz 1 Scope This part of IEC 60603 covers 8-way, shielded, free and fixed connectors, references dimensional, mechanical, electrical and environmental characteristics and tests in IEC 60603-7, and specifies electri

48、cal transmission requirements, including power sum alien (exogenous) crosstalk, for frequencies up to 2 000 MHz. These connectors are typically used as “category 8.1” connectors in “class I” cabling systems specified in ISO/IEC 11801. These connectors are intermateable and interoperable with other I

49、EC 60603-7 series connectors as defined in Clause 2 of IEC 60603-7. These connectors are backward compatible with other IEC 60603-7 series connectors, except IEC 60603-7-7 and IEC 60603-7-71 connectors. NOTE Transmission performance categories: in this IEC standard, the term “category”, when used in reference to transmission performance, refers to those categories defined by ISO/IEC 11801. 2 Normative references The following