IEC TR 62687-2015 Graphical symbols for use on equipement - Vocabulary《设备用图形符号.词汇》.pdf

《IEC TR 62687-2015 Graphical symbols for use on equipement - Vocabulary《设备用图形符号.词汇》.pdf》由会员分享，可在线阅读，更多相关《IEC TR 62687-2015 Graphical symbols for use on equipement - Vocabulary《设备用图形符号.词汇》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC TR 62687 Edition 2.0 2015-12 TECHNICAL REPORT Graphical symbols for use on equipement Vocabulary IEC TR 62687:2015-12(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication ma

2、y be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry a

3、bout obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the I

4、EC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the

5、 IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Techn

6、ical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, re

7、placed and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dict

8、ionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology

9、entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on th

10、is publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC TR 62687 Edition 2.0 2015-12 TECHNICAL REPORT Graphical symbols for use on equipement Vocabulary INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 01.080.40 ISBN 978-2-8322-3042-8 Registered trademark o

11、f the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC TR 62687:2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 Annex A (informative) S

12、ome terms explained by examples 10 Bibliography 13 IEC TR 62687:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ GRAPHICAL SYMBOLS FOR USE ON EQUIPEMENT VOCABULARY FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising al

13、l national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Te

14、chnical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory w

15、ork. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

16、 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recomm

17、endations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any

18、 end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publ

19、ication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by indepe

20、ndent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any p

21、ersonal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative

22、references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible

23、 for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee may propose the publication of a technical report when it has collected data of a different kind from that which is normally published as an

24、 International Standard, for example “state of the art“. IEC 62687, which is a technical report, has been prepared by subcommittee 3C: Graphical symbols for use on equipment, of IEC technical committee 3: Information structures, documentation and graphical symbols. This second edition cancels and re

25、places the first edition published in 2011. This edition constitutes a technical revision and includes the following significant technical changes with respect to the previous edition: a) The title has changed from “terminology“ to “vocabulary“; b) Annex A has been added. 4 IEC TR 62687:2015 IEC 201

26、5 The text of this technical report is based on the following documents: Enquiry draft Report on voting 3C/2091/DTR 3C/2116/RVC Full information on the voting for the approval of this technical report can be found in the report on voting indicated in the above table. This publication has been drafte

27、d in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publicati

28、on will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the cor

29、rect understanding of its contents. Users should therefore print this document using a colour printer. IEC TR 62687:2015 IEC 2015 5 INTRODUCTION The publications cited in the Bibliography, published by IEC, ISO and ITU constitute the source for the glossary in this Technical report. The terms are pr

30、imarily collected from Clause 3, “Terms and definitions” of these publications but in some cases terms are also taken from other parts of these publications. 6 IEC TR 62687:2015 IEC 2015 GRAPHICAL SYMBOLS FOR USE ON EQUIPEMENT VOCABULARY 1 Scope This Technical Report contains a collection of terms (

31、glossary) used in IEC, ISO and ITU publications in the field of graphical symbols for use on equipment including some related fields. Some terms are annotated and/or modified for the purpose of clarification. 2 Normative references The following documents, in whole or in part, are normatively refere

32、nced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. None. 3 Terms and definitions For the purposes of this document, the follow

33、ing terms and definitions apply. 3.1 caution signal word used to indicate a potentially hazardous situation which, if not avoided, may result in minor or moderate injury SOURCE: ISO 17724:2003, 6 3.2 danger signal word used to indicate an imminently hazardous situation which, if not avoided, may res

34、ult in death or serious injury SOURCE: ISO 17724:2003, 18 3.3 dynamic graphical symbol graphical symbol for use on a monitor screen and a console display whose colour and/or appearance change in accordance with the internal status of the piece of equipment 3.4 glyph recognizable abstract graphic sym

35、bol which is independent of any specific design SOURCE: ISO/IEC 9541-1:1991, 3.12 3.5 glyph image image of a glyph, as obtained from a glyph representation displayed on a presentation surface IEC TR 62687:2015 IEC 2015 7 SOURCE: ISO/IEC 9541-1:1991, 3.15 3.6 graphic symbol visual representation of a

36、 graphic character or of a composite sequence SOURCE: ISO/IEC 10646-1:1993, 4.19 3.7 graphic character character, other than a control function, that has a visual representation normally handwritten, printed, or displayed SOURCE: ISO/IEC 10646-1:1993, 4.18 3.8 graphical symbol visually perceptible f

37、igure with a particular meaning used to transmit information independently of language Note 1 to entry: The unique nature of graphical symbols is their language independence. Therefore, the use of letters and punctuation marks as graphical symbol elements should be avoided. Note 2 to entry: Graphica

38、l symbols are usually abstract representations that stand for something but that require learning on the part of users to take on their meaning. SOURCE: IEC 80416-1:2008, 3.4 SOURCE: ISO 17724:2003, 31 3.9 graphical symbol for use on equipment graphical symbol for use on associated assemblies intend

39、ed to achieve a defined final objective SOURCE: Derived from IEC 80416-1:2008 3.10 icon graphical symbol presented on a screen or display Note 1 to entry: Icons can be static, interactive and change as the result of user input or dynamic and change as the result of equipment status. Note 2 to entry:

40、 Alternative definitions depending on domains are as follows: user interface symbol / object representing an object or a function of the computer system ISO/IEC FCD 11581-10, 3.4 modified symbol or combination of symbols in graphical user interfaces representing a function of the computer system obj

41、ect of manipulation of a function of the computer system through graphical user interfaces for computer applications Icons should be graphical representations that convey information with a minimum reliance on language. Icons have dynamic nature depending on the function of the computer system. Icon

42、s may be entirely abstract, like graphical symbols, or pictorial, like pictograms, or fall at some point between those extremes. SOURCE: ISO 80416-4:2005, 3.3 8 IEC TR 62687:2015 IEC 2015 3.11 pictogram simplified pictorial representations, used to guide people and tell them how to achieve a certain

43、 goal Note 1 to entry: Pictograms should be graphical representations that convey information with a minimum of reliance on language. Note 2 to entry: Pictograms are, as far as possible, self-explanatory, and require little or no learning on the part of users. Note 3 to entry: Pictorial representati

44、on can be two- or three-dimensional. SOURCE: ITU-T E.121:2006, 3.1, modified 3.12 safety related graphical symbol graphical symbol for use on equipment that conveys a message with a relation to personal and/or equipment safety and that is not qualified as a safety sign, e.g. because the related risk

45、 is comparatively low Note 1 to entry: A safety related graphical symbol may e.g. express a prohibition (Do not . !) or a warning related to a specific hazard (Caution! .), however it is not required to use the safety colours and shapes according to ISO 3864. It can be standardized in IEC 60417 or I

46、SO 7000. 3.13 safety sign sign which gives a general safety message, obtained by a combination of colour and geometric shape and which, by the addition of a graphical symbol, gives a particular safety message SOURCE: ISO 17724:2003, 68 3.14 sign configuration of visual elements including symbols, te

47、xt and shapes intended to communicate a given meaning SOURCE: ISO 17724:2003, 71 3.15 signal word word that calls attention to a potentially or imminently hazardous situation SOURCE: ISO 17724:2003, 73 3.16 symbol visual (audible or tactile) sign, single letter, numeral, punctuation mark each of whi

48、ch has a fixed meaning Note 1 to entry: Symbols are usually graphical representations that convey information with little reliance on language. Note 2 to entry: Symbols are usually abstract representations that stand for something but that require learning on the part of users to take on their meani

49、ng. Note 3 to entry: Examples of symbols are graphical symbols, graphic symbols, character symbols, chemical symbols, mathematical symbols, musical symbols, sex symbols, status symbols, tactile symbols, audible symbols. IEC TR 62687:2015 IEC 2015 9 3.17 warning signal word used to indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury SOURCE: ISO 17724:2003, 84 10 IEC TR 62687:2015 IEC 2015 Annex A (