IEC 62759-1-2015 Photovoltaic (PV) modules - Transportation testing - Part 1 Transportation and shipping of module package units《光伏 (PV) 模块 运输试验 第1部分 模块包装单元的运输和航运》.pdf

《IEC 62759-1-2015 Photovoltaic (PV) modules - Transportation testing - Part 1 Transportation and shipping of module package units《光伏 (PV) 模块 运输试验 第1部分 模块包装单元的运输和航运》.pdf》由会员分享，可在线阅读，更多相关《IEC 62759-1-2015 Photovoltaic (PV) modules - Transportation testing - Part 1 Transportation and shipping of module package units《光伏 (PV) 模块 运输试验 第1部分 模块包装单元的运输和航运》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62759-1 Edition 1.0 2015-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Photovoltaic (PV) modules Transportation testing Part 1: Transportation and shipping of module package units Modules photovoltaques (PV) Essais de transport Partie 1: Transport et expdition dunits demballage de modules IEC

2、62759-1:2015-06(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfil

3、m, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member Nation

4、al Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord cri

5、t de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Of

6、fice Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electron

7、ic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone

8、 application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find I

9、EC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publicat

10、ions released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also

11、known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected

12、from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Inte

13、rnationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer

14、que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres doc

15、uments de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les pr

16、ojets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org

17、 Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC -

18、 std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients

19、- webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62759-1 Edition 1.0 2015-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Photovoltaic (PV) modules Transportation testing Part 1: Transportation and shi

20、pping of module package units Modules photovoltaques (PV) Essais de transport Partie 1: Transport et expdition dunits demballage de modules INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 27.160 ISBN 978-2-8322-2757-2 Registered trademark of the International

21、 Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 62759-1:2015 IEC 201

22、5 CONTENTS FOREWORD. 3 1 Scope and object . 5 2 Normative references 5 3 Terms and definitions 6 4 Sampling . 7 5 Handling 7 6 Testing procedures 8 6.1 General . 8 6.2 Measurements 11 6.3 Transportation testing . 11 6.3.1 General . 11 6.3.2 Random vibration testing 11 6.3.3 Shock testing . 12 6.4 En

23、vironmental stress tests 13 6.4.1 PV modules . 13 6.4.2 CPV modules and receivers . 14 7 Reporting 14 Annex A (normative) Test profiles 16 A.1 Overview 16 A.2 Data points of appropriate PSD test profiles . 16 Figure 1 Test sequences for PV modules 9 Figure 2 Test sequences for CPV modules . 10 Figur

24、e A.1 Appropriate PSD test profile 18 Table A.1 Severity of common transport test profiles: complete and in range (5 Hz 200 Hz) 16 Table A.2 Main reference ASTM D4169 (truck medium) 17 Table A.3 Grid points ISO 13355 17 Table A.4 IEC 60068-2-64 / MIL STD 810G . 17 Table A.5 ISTA 3E . 17 IEC 62759-1:

25、2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PHOTOVOLTAIC (PV) MODULES TRANSPORTATION TESTING Part 1: Transportation and shipping of module package units FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all nati

26、onal electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technica

27、l Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. I

28、nternational, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) Th

29、e formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendati

30、ons for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end u

31、ser. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publicatio

32、n shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent

33、certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any persona

34、l injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative refere

35、nces cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for i

36、dentifying any or all such patent rights. International Standard IEC 62759-1 has been prepared by IEC technical committee 82: Solar photovoltaic energy systems. The text of this standard is based on the following documents: FDIS Report on voting 82/962/FDIS 82/982/RVD Full information on the voting

37、for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 IEC 62759-1:2015 IEC 2015 A list of all parts of IEC 62759 series, under the general title Photovoltaic (PV) mod

38、ules Transportation testing, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the

39、publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 62759-1:2015 IEC 2015 5 PHOTOVOLTAIC (PV) MODULES TRANSPORTATION TESTING Part 1: Transportation and shipping of module package units 1 Scope and object Photovoltaic (PV) modules are electrical devices intended

40、 for continuous outdoor exposure during their lifetime. Existing type approval standards do not consider mechanical stresses that may occur during transportation to the PV installation destination. This part of IEC 62759 describes methods for the simulation of transportation of complete package unit

41、s of modules and combined subsequent environmental impacts, it does however not include pass/fail criteria. This standard is designed so that its test sequence can co-ordinate with those of IEC 61215 or IEC 61646, so that a single set of samples may be used to perform both the transportation simulat

42、ion and performance evaluation of a photovoltaic module design. This standard applies to flat plate photovoltaic modules, but may also be used as a basis for testing of CPV modules and assemblies. 2 Normative references The following documents, in whole or in part, are normatively referenced in this

43、 document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-27:2008, Environmental testing Part 2-27: Tests Test Ea and guidance: Shock

44、 IEC 60068-2-64, Environmental testing Part 2-64: Tests Test Fh: Vibration, broadband random and guidance IEC 61215:2005, Crystalline silicon terrestrial photovoltaic (PV) modules Design qualification and type approval IEC 61646:2008, Thin-film terrestrial photovoltaic (PV) modules Design qualificat

45、ion and type approval IEC 61730-2:2004, Photovoltaic (PV) module safety qualification Part 2: Requirements for testing IEC TS 61836, Solar photovoltaic energy systems Terms, definitions and symbols IEC 62108:2007, Concentrator photovoltaic (CPV) modules and assemblies Design qualification and type a

46、pproval IEC 62782, Dynamic mechanical load testing for photovoltaic (PV) modules (to be published) ISO 13355, Packaging Complete, filled transport packages and unit loads Vertical random vibration test 6 IEC 62759-1:2015 IEC 2015 ASTM D880-92:2008, Standard Test Method for Impact Testing for Shippin

47、g Containers and Systems ASTM D4169:2008, Standard Practice for Performance Testing of Shipping Containers and Systems ASTM D4728:2006, Standard Test Method for Random Vibration Testing of Shipping Containers ASTM D5277:1992, Test method for performing programmed horizontal impact using an incline i

48、mpact tester ISTA 3E:2009, Unitized Loads of Same Product MIL STD 810G, Test Method Standard for Environmental Engineering Considerations and Laboratory Tests 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC TS 61836:1999 and the following apply. 3.1

49、bandwidth difference in Hz between the upper and lower limits of a frequency band. For the purposes of the described test method, the bandwidth may be considered equivalent to the frequency resolution of a spectrum analysis 3.2 overall g RMSsquare root of the integral of power spectral density over the total frequency range. It describes the severity or harshness of the testing gr