IEC 61481-2-2014 Live working - Phase comparators - Part 2 Resistive type to be used for voltages from 1kV to 36 kV a.c.《带电作业 相位比较器 第2部分 用于1 kV至36 kV交流电压的电阻式》.pdf

《IEC 61481-2-2014 Live working - Phase comparators - Part 2 Resistive type to be used for voltages from 1kV to 36 kV a.c.《带电作业 相位比较器 第2部分 用于1 kV至36 kV交流电压的电阻式》.pdf》由会员分享，可在线阅读，更多相关《IEC 61481-2-2014 Live working - Phase comparators - Part 2 Resistive type to be used for voltages from 1kV to 36 kV a.c.《带电作业 相位比较器 第2部分 用于1 kV至36 kV交流电压的电阻式》.pdf（164页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61481-2 Edition 1.0 2014-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Live working Phase comparators Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. Travaux sous tension Comparateurs de phase Partie 2: Type rsistif pour usage sur des tensions alternatives de 1 kV 36 kV

2、IEC 61481-2:2014-10(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photoco

3、pying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local

4、 IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms

5、, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsiden

6、ce. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all el

7、ectrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalog

8、ue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search

9、 enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published detail

10、s all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additiona

11、l languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries ha

12、ve been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Ele

13、ctrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veui

14、llez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techni

15、ques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des infor

16、mations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - ww

17、w.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en lign

18、e. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC

19、. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61481-2 Edition 1.0 2014-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Live working Phase comparators Part 2: Resistive type to be u

20、sed for voltages from 1 kV to 36 kV a.c. Travaux sous tension Comparateurs de phase Partie 2: Type rsistif pour usage sur des tensions alternatives de 1 kV 36 kV INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XC ICS 13.260; 29.240.20; 29.260.99 PRICE CODE CODE P

21、RIX ISBN 978-2-8322-1878-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu c

22、ette publication via un distributeur agr. colour inside 2 IEC 61481-2:2014 IEC 2014 CONTENTS FOREWORD . 6 INTRODUCTION . 8 1 Scope 9 2 Normative references 9 3 Terms and definitions 10 4 Requirements 14 4.1 Indication 14 4.2 Functional requirements 14 4.2.1 Clear indication . 14 4.2.2 Clear percepti

23、bility . 16 4.2.3 Temperature and humidity dependence of the indication 16 4.2.4 Frequency dependence . 16 4.2.5 Response time . 17 4.2.6 Power source dependability . 17 4.2.7 Testing element . 17 4.2.8 Time rating 17 4.3 Electrical requirements . 17 4.3.1 Insulating material . 17 4.3.2 Protection a

24、gainst bridging 17 4.3.3 Resistance against sparking 17 4.3.4 Resistive element 18 4.3.5 Insulating element of phase comparator as a complete device . 18 4.3.6 Circuit current 18 4.3.7 Indicator casing . 18 4.3.8 Insulation of the connecting lead . 18 4.4 Mechanical requirements 18 4.4.1 General . 1

25、8 4.4.2 Design . 18 4.4.3 Dimensions, construction . 20 4.4.4 Grip force and deflection . 21 4.4.5 Vibration resistance . 22 4.4.6 Drop resistance . 22 4.4.7 Shock resistance . 22 4.5 Marking . 22 4.6 Instructions for use . 22 4.7 Requirements in the case of reasonably foreseeable misuse during live

26、 working . 23 4.7.1 Voltage selection . 23 4.7.2 Frequency selection 23 5 Tests . 23 5.1 General . 23 5.1.1 Testing provisions . 23 5.1.2 Atmospheric conditions 23 5.1.3 Tests under wet conditions 23 5.1.4 Type test . 24 5.1.5 Test methods . 25 IEC 61481-2:2014 IEC 2014 3 5.2 Function tests . 25 5.2

27、.1 Description of the test set-up and general pass criteria 25 5.2.2 Clear indication . 31 5.2.3 Electromagnetic compatibility (EMC) . 33 5.2.4 Influence of electric interference fields. 33 5.2.5 Clear perceptibility . 36 5.2.6 Frequency dependence . 40 5.2.7 Response time . 40 5.2.8 Power source de

28、pendability . 40 5.2.9 Check of testing element . 41 5.2.10 Time rating 41 5.3 Dielectric tests 42 5.3.1 Insulating material for tubes and rods 42 5.3.2 Protection against bridging for indoor/outdoor type phase comparator . 42 5.3.3 Protection against bridging for outdoor type phase comparator 47 5.

29、3.4 Spark resistance 48 5.3.5 Leakage current for phase comparator as a complete device . 49 5.3.6 Dielectric strength of connecting lead 52 5.3.7 Maximum current in case of misuse . 53 5.4 Mechanical tests . 53 5.4.1 Visual and dimensional inspection . 53 5.4.2 Grip force and deflection for phase c

30、omparator as a complete device 54 5.4.3 Robustness of connecting lead and connections 54 5.4.4 Vibration resistance . 56 5.4.5 Drop resistance . 56 5.4.6 Shock resistance . 57 5.4.7 Climatic resistance 58 5.4.8 Durability of markings 59 5.5 Test for reasonably foreseeable misuse during live working

31、59 5.5.1 Voltage selection (where relevant) . 59 5.5.2 Frequency selection (where relevant) 59 6 Conformity assessment of phase comparators having completed the production phase 60 7 Modifications . 60 Annex A (normative) Instructions for use . 61 Annex B (normative) Suitable for live working; doubl

32、e triangle (IEC 60417 5216 (2002-10) . 63 Annex C (normative) Chronology of type tests . 64 Annex D (normative) Classification of defects and tests to be allocated . 66 Annex E (informative) Information and guidelines on the use of the limit mark and of a contact electrode extension 68 E.1 General .

33、 68 E.2 Situation when using a phase comparator as a complete device . 68 E.3 Situation when using a phase comparator as a separate device 71 Annex F (informative) Rationale for the classification of defects. 74 Annex G (informative) In-service care 76 Bibliography 77 4 IEC 61481-2:2014 IEC 2014 Fig

34、ure 1 Illustration of different elements of a phase comparator . 20 Figure 2 Location of allowed conductive parts within the minimum length of the insulating element of a pole of a phase comparator as a complete device . 21 Figure 3 Test set-up for clear indication with the ball electrode in front o

35、f its ring electrode 27 Figure 4 Test set-up for clear indication with the ball electrode behind its ring electrode 28 Figure 5 Example of positioning of a pole of the phase comparator in relation to a ball and ring test arrangement 30 Figure 6 Examples of suitable means for ensuring appropriate con

36、tact between a contact electrode and the ball electrode 30 Figure 7 Test set-up for clear perceptibility of visual indication 37 Figure 8 Test set-up for clear perceptibility of audible indication 39 Figure 9 Test arrangements and dimensions of the bars for protection against bridging 43 Figure 10 E

37、lectrical connection of the bars 44 Figure 11 Surface stress test . 44 Figure 12 Radial and surface stress test 45 Figure 13 Bridging test on the connecting lead . 46 Figure 14 Test arrangement for testing bridging protection of outdoor type phase comparator . 48 Figure 15 Arrangement for leakage cu

38、rrent test under dry conditions for phase comparator as a complete device 50 Figure 16 Arrangement for leakage current tests under wet conditions for phase comparator as a complete device 51 Figure 17 Test set up for pressure load application 52 Figure 18 Test for grip force . 54 Figure 19 Test set-

39、up for the robustness of connecting lead and connections 55 Figure 20 Drop resistance test Diagonal position 57 Figure 21 Curve of test cycle for climatic resistance . 58 Figure E.1 Insulation element of a pole of a phase comparator as a complete device . 68 Figure E.2 Example of positioning of a po

40、le of a phase comparator in contact with a live part without obstacles from other live parts . 69 Figure E.3 Example of incorrect positioning of a pole of a phase comparator with the limit mark between two live parts 70 Figure E.4 Usual ways of managing the selection or the use of the phase comparat

41、or for maintaining the insulation distance between the limit mark and the hand guard . 71 Figure E.5 Usual ways of managing the use of the phase comparator as a separate device for assuring the appropriate insulation for the worker . 73 Table 1 Climatic condition ranges 16 Table 2 Minimum length of

42、the insulating element (L i ) of a phase comparator as a complete device 20 Table 3 Dimensioning of the ball and ring test set-up . 29 Table 4 Test series and conditions for clear indication . 32 Table 5 Test series and conditions for influence of electric interference fields 35 Table 6 Distance d 1

43、for the bridging test set-up . 43 IEC 61481-2:2014 IEC 2014 5 Table 7 Dimensions for the concentric rings and band electrodes 47 Table C.1 Sequential order for performing type tests a64 Table C.2 Type tests out of sequence 65 Table D.1 Classification of defects and associated requirements and tests

44、66 Table E.1 Recommended minimum lengths from the limit mark to the contact electrode (A i ) 71 Table F.1 Rationale for the classification of defects . 74 Table G.1 In-service testing . 76 6 IEC 61481-2:2014 IEC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LIVE WORKING PHASE COMPARATORS Part 2:

45、Resistive type to be used for voltages from 1 kV to 36 kV a.c. FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

46、co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referre

47、d to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in t

48、his preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internatio

49、nal consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC