IEC 61360-1-2017 Standard data element types with associated classification scheme - Part 1 Definitions - Principles and methods《带有相关分类表的标准数据元类型.第1部分 定义 原则和方法》.pdf

《IEC 61360-1-2017 Standard data element types with associated classification scheme - Part 1 Definitions - Principles and methods《带有相关分类表的标准数据元类型.第1部分 定义 原则和方法》.pdf》由会员分享，可在线阅读，更多相关《IEC 61360-1-2017 Standard data element types with associated classification scheme - Part 1 Definitions - Principles and methods《带有相关分类表的标准数据元类型.第1部分 定义 原则和方法》.pdf（358页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61360-1 Edition 4.0 2017-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Standard data element types with associated classification scheme Part 1: Definitions Principles and methods Types normaliss dlments de donnes avec plan de classification Partie 1: Dfinitions Principes et mthodes IEC 61360-

2、1:2017-07(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and

3、microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC membe

4、r National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans lac

5、cord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Ce

6、ntral Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical,

7、electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The sta

8、nd-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables t

9、o find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new

10、publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also kn

11、own as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier

12、 publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (

13、IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous pos

14、sdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lI

15、EC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les

16、 publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier

17、dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 16 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary

18、 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vou

19、s dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61360-1 Edition 4.0 2017-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Standard data element types with associated classification scheme Part 1: Definitions Principles and method

20、s Types normaliss dlments de donnes avec plan de classification Partie 1: Dfinitions Principes et mthodes INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 31.020 ISBN 978-2-8322-4581-1 Registered trademark of the International Electrotechnical Commission Marqu

21、e dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 61360-1:2017 IEC 2017 CONTENTS FOREWORD

22、. 10 INTRODUCTION . 12 1 Scope 13 2 Normative references 13 3 Terms, definitions and abbreviated terms 14 3.1 Terms and definitions 14 3.2 Abbreviated terms . 20 4 Foundation for the concepts of IEC 61360 standard dictionaries 20 5 Dictionary identification . 22 5.1 General . 22 5.2 Dictionary_suppl

23、ier . 22 5.3 Code . 22 5.4 Version_number 23 5.5 Date_of_current_version . 23 5.6 Revision_number 23 6 Property 24 6.1 Overview. 24 6.2 Specification of information object 27 6.3 Data_element_type_class . 28 6.4 Depends_on . 29 6.5 Formula 29 6.6 Preferred_letter_symbol 30 6.7 Synonymous_letter_symb

24、ol 30 6.8 Attributes internal to Property . 30 6.9 Code_of_alternative_unit 31 6.10 Code_of_list_of_units . 31 6.11 Code_of_unit 32 6.12 Definition_class 32 6.13 Drawing_reference 32 7 Identifying_attributes . 32 7.1 Overview. 32 7.2 Specification of information object 33 7.3 Code . 34 7.4 Preferred

25、_name 35 7.5 Revision_number 35 7.6 Short_name 36 7.7 Synonymous_name . 36 7.8 Version_number 36 8 Semantic_attributes . 37 8.1 Overview. 37 8.2 Specification of information object 37 8.3 Definition 37 8.4 Note 39 8.5 Remark . 39 8.6 Source_document_of_definition 39 9 Administrative_attributes . 40

26、IEC 61360-1:2017 IEC 2017 3 9.1 Overview. 40 9.2 Specification of information object 40 9.3 Obsolete_date 40 9.4 Proposal_date . 40 9.5 Published_in . 41 9.6 Published_by 41 9.7 Responsible_committee 41 9.8 Revision_released_on . 42 9.9 Status_level 42 9.10 Version_initiated_on . 43 9.11 Version_rel

27、eased_on 43 10 Value_attributes 43 10.1 Overview. 43 10.2 Specification of information object 44 10.3 Alternative_units_of_measure . 44 10.4 Data_type . 45 10.4.1 General . 45 10.4.2 Simple type . 46 10.4.3 Enumeration type 51 10.4.4 Class instance type . 52 10.4.5 Class reference type 53 10.4.6 Agg

28、regate type 53 10.4.7 Level type 55 10.4.8 Large object type . 56 10.4.9 Placement type 56 10.4.10 Data type dependencies 57 10.5 Number_of_significant_digits 59 10.6 Referenced_class_identifier 60 10.7 Unit_of_measure . 60 10.8 Value_format 61 11 Condition_property 63 11.1 Specification of informat

29、ion object 63 11.2 Property_data_element_type 64 12 Dependent_condition_property 64 12.1 Specification of information object 64 12.2 Depends on 65 12.3 Property_data_element_type 65 13 Dependent_property 66 13.1 Specification of information object 66 13.2 Depends on 66 13.3 Property_data_element_typ

30、e 67 14 Non_dependent_property 67 14.1 Specification of information object 67 14.2 Property_data_element_type 67 15 Translation_information . 68 15.1 Specification of information object 68 15.2 Date_of_current_translation_revision 68 15.3 Language_code 68 4 IEC 61360-1:2017 IEC 2017 15.4 Responsible

31、_translator . 69 15.5 Responsible_translator_coded 69 15.6 Translation_revision 69 16 Value_list 70 16.1 Specification of information object 70 16.2 Attributes internal to Value_list . 71 16.3 Definition_class 71 16.4 Enumerated_list_of_terms 72 17 Term 72 17.1 Specification of information object 72

32、 17.2 Preferred_letter_symbol_in_text . 73 17.3 Attributes internal to Term . 73 17.4 Definition_class 73 18 Drawing . 73 18.1 Information model . 73 18.2 Specification of information object 74 18.3 Code . 75 18.4 Descriptive_designator . 75 18.5 Drawing_title . 76 18.6 File_format . 76 18.7 File_na

33、me . 77 18.8 Revision_number 77 18.9 Version_number 78 18.10 Attributes internal to Drawing 78 19 Unit of measure . 78 19.1 Overview. 78 19.2 Specification of information object 79 19.3 Primary_unit . 80 19.4 Unit_in_text 80 19.5 Unit_XML 80 19.6 Attributes internal to Unit_of_measure 81 19.7 Drawin

34、g_reference 81 20 Creation of language variants 81 20.1 Overview. 81 20.2 Language-dependent attributes of a Property 81 20.3 Language-dependent attributes of an Item_class 82 20.4 Language-dependent attributes of a Drawing 82 20.5 Language-dependent attributes of a Unit_of_measure 82 20.6 Language-

35、dependent attributes of a Relation 82 21 Item_class . 82 21.1 Classification tree . 82 21.2 Composition tree . 85 21.3 Use of auxiliary schemes for classification and coding of values . 86 21.4 Information model . 87 21.5 Specification of information object 87 21.6 Class_type 88 21.7 Coded_name 89 2

36、1.8 Attributes internal to Item_class 89 IEC 61360-1:2017 IEC 2017 5 21.9 Applicable_data_element_type . 89 21.10 Applicable_relation . 90 21.11 Classifying_data_element_type . 90 21.12 Drawing_reference 91 21.13 Is_case_of 91 21.14 Superclass 91 22 Relation . 92 22.1 Overview. 92 22.2 Specification

37、 of information object 93 22.3 External_solver_for_the_formula . 93 22.4 Formula 94 22.5 Language_for_formula_interpretation 95 22.6 Relation type. 95 22.7 Role_of_the_relation . 95 22.8 Attributes internal to Relation 97 22.9 Definition_class 98 22.10 Codomain_of_function 98 22.11 Domain_of_functio

38、n 98 22.12 Domain_of_relation . 99 22.13 Drawing_reference 99 22.14 Super_relation 99 23 Dictionary_element 99 24 Advanced concepts . 100 24.1 Overview. 100 24.2 Condition 100 24.3 Reuse of properties 104 24.4 Classes and properties for common use . 106 24.5 Block 107 24.6 Cardinality 109 24.7 Polym

39、orphism . 111 24.7.1 Overview . 111 24.7.2 Polymorphic choices directly assigned to the specified Item_class 112 24.7.3 Polymorphic choices assigned to the specified Item_class through a Value_list 114 24.8 Relation 116 24.8.1 Overview . 116 24.8.2 Restricted enumeration 116 24.8.3 Grouping . 118 25

40、 Qualifiers . 119 26 Characters and character sets . 120 26.1 Overview. 120 26.2 Recommended character sets . 120 26.3 Line feed . 120 26.4 Subscript 120 26.5 Superscript . 121 26.6 Greek characters 121 Annex A (informative) Data model 123 Annex B (normative) Type classification codes of properties

41、128 6 IEC 61360-1:2017 IEC 2017 B.1 Property classification . 128 B.1.1 Overview . 128 B.1.2 Principles 128 B.1.3 Quantitative Property information objects 128 B.1.4 Non-quantitative Property information objects 130 B.2 Survey of type classification codes for non-quantitative properties 130 B.3 Surv

42、ey of type classification codes for quantitative properties . 131 Annex C (informative) Preparation of new classes and properties 141 C.1 Responsibilities . 141 C.2 Recommended elements of data set . 141 Annex D (informative) Rules for defining new versions and revisions of dictionary elements . 142

43、 D.1 Changes in the attributes of Property information objects 142 D.2 Changes in the attributes of class information objects . 144 Annex E (informative) Classifying_data_element_type attribute . 145 Annex F (informative) Conventions for names and definitions 146 F.1 Conventions for writing definiti

44、ons 146 F.1.1 General . 146 F.1.2 ISO/IEC 11179-4 . 146 F.1.3 ISO 704 . 146 F.1.4 Additional conventions . 147 F.2 Conventions for writing names 147 F.2.1 Requirements 147 F.2.2 Recommendations . 147 F.2.3 Mechanical quantitative property names 147 F.2.4 Electrical quantitative property names . 147

45、F.2.5 Non-quantitative property names . 148 Annex G (normative) Value format specification . 149 G.1 General . 149 G.2 Notation 149 G.3 Data value format types 151 G.4 Meta-identifier used to define the formats . 151 G.5 Quantitative value formats 151 G.5.1 General . 151 G.5.2 NR1-value format 151 G

46、.5.3 NR2-value format 152 G.5.4 NR3-value format 152 G.5.5 NR4-value format 153 G.6 Non-quantitative value formats 154 G.6.1 General . 154 G.6.2 Alphabetic value format . 154 G.6.3 Mixed characters value format . 155 G.6.4 Number value format . 155 G.6.5 Mixed alphabetic or numeric characters value

47、format . 156 G.6.6 Binary value format 156 G.7 HTML5 format . 156 G.8 Value examples 157 Annex H (informative) Modelling notation . 158 IEC 61360-1:2017 IEC 2017 7 H.1 General . 158 H.2 UML Class 158 H.3 Generalization 158 H.4 Simple association 158 H.5 Modularization with UML package . 159 Bibliogr

48、aphy 161 Figure 1 Simplified model of IEC 61360-1 (UML class diagram) . 21 Figure 2 Overview model for Characteristic (UML class diagram) 27 Figure 3 Property (UML class diagram) 28 Figure 4 Identifying attributes (UML class diagram) 34 Figure 5 Semantic attributes (UML class diagram) . 37 Figure 6

49、Administrative_attributes (UML class diagram) 40 Figure 7 Value_attributes (UML class diagram) 44 Figure 8 Examples for technical data associated with connecting lines . 46 Figure 9 Condition_property (UML class diagram) 64 Figure 10 Dependent_condition_property (UML class diagram) 65 Figure 11 Dependent_property (UML class diagram) 66 Figure 12 Non_dependent_property (UML class diagram) 67 Figure 13 Translation_in