TIA-1137 910-A-2011 CAN Data Dictionary《CAN数据词典》.pdf

《TIA-1137 910-A-2011 CAN Data Dictionary《CAN数据词典》.pdf》由会员分享，可在线阅读，更多相关《TIA-1137 910-A-2011 CAN Data Dictionary《CAN数据词典》.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-1137.910-A November 2011CAN Data Dictionary Revision A NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisti

2、ng the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and

3、Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By su

4、ch action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the res

5、ponsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0291.910-RV1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Docu

6、ment will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property ri

7、ghts (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requ

8、ested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the p

9、arties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If th

10、e Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of ma

11、ndatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encourageme

12、nt of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential

13、 Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES,

14、 EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESS

15、LY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUME

16、NT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDIN

17、G DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL EL

18、EMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. X.S0054-910-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

19、59 60 i ContentsCAN Data Dictionary CONTENTS 1 Introduction1 1.1 Scope1 2 References2 2.1 Normative References2 2.2 Informative References3 3 RADIUS Attributes Definitions .4 3.1 AAA-Session-ID4 3.2 PMN-AN-RK1.4 3.3 AGW-Redirect.5 3.4 LinkID6 3.5 User-Session-Tracking.6 3.6 IP-Services-Authorized7 3

20、.7 ERP-Support 8 3.8 PMN-AN-SPI.8 3.9 PMN-AN-HA2.9 3.10 VAAA-Assigned-MIP4-HA 9 3.11 Maximum-Authorized-Aggregate-Bandwidth.10 3.12 Inter-User-Priority .10 3.13 Network-PMIP-NAI 11 3.14 PMIP-Based-Mobility-Capability12 3.15 PMIP-HA-Info-IPv4-Service.12 3.16 PMIP-HA-Info-IPv6-Service.14 3.17 Multiple

21、-Auth-Support 16 3.18 Multiple-Auth-Profile 16 3.19 Accounting-Mode 17 3.20 Connection-Time .18 3.21 Reservation- Based-Usage.18 3.22 ANID .21 3.23 AGW-RAN-PMIP-Binding-Capability22 3.24 AGW-IP-Address.22 4 Radius Attributes Table24 4.1 Between AGW and AAA.24 4.2 Between HA and AAA 26 4.3 Between eB

22、S/SRNC and AGW .27 5 Diameter AVP Definitions.30 X.S0054-910-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Contents ii 5.1 AAA-Session-ID32 5.2 PMN-AN-RK1.32 5.3 LinkID

23、32 5.4 Carrier-ID.32 5.5 IP-Services-Authorized32 5.6 ERP-Support 33 5.7 PMN-AN-SPI.33 5.8 PMN-AN-HA2.33 5.9 Maximum-Authorized-Aggregate-Bandwidth .33 5.10 Authorized-Flow-Profile-IDs-for-the-User33 5.11 Inter-User-Priority33 5.12 Allowed-Differentiated-Service-Marking34 5.13 Multiple-Auth-Support.

24、34 5.14 Multiple-Auth-Profile 34 5.15 Accounting-Mode 35 5.16 Allowed-Diffserv-Class-Flag.35 5.17 Max-Class-Selection-Marking .35 5.18 Reverse-Tunnel-Marking.36 5.19 ProfileID-Forward36 5.20 ProfileID-Reverse 37 5.21 ProfileID-Bi-Direction.37 5.22 AGW-RAN-PMIP-Binding-Capability37 6 Diameter AVP Tab

25、le38 6.1 Between AGW and AAA.38 6.2 Between eBS/SRNC and AGW .39 X.S0054-910-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 iii List of FiguresLIST OF FIGURES Figure 1 A

26、AA-Session-ID VSA4 Figure 2 PMN-AN-RK1 VSA.5 Figure 3 AGW-Redirect VSA.5 Figure 4 LinkID VSA .6 Figure 5 User-Session-Tracking VSA.6 Figure 6 IP-Services-Authorized VSA7 Figure 7 ERP-Support VSA8 Figure 8 PMN-AN-SPI VSA 8 Figure 9 PMN-AN-HA2 VSA 9 Figure 10 VAAA-Assigned-MIP4-HA VSA 10 Figure 11 Max

27、imum-Authorized-Aggregate-Bandwidth10 Figure 12 Inter-User-Priority VSA .11 Figure 13 Network-PMIP-NAI VSA 11 Figure 14 PMIP-Based-Mobility-Capability VSA12 Figure 15 PMIP-HA-Info-IPv4-Service13 Figure 16 PMIP-HA-Info-IPv6-Service14 Figure 17 Multiple-Auth-Support VSA 16 Figure 18 Multiple-Auth-Prof

28、ile .16 Figure 19 Accounting-Mode VSA 17 Figure 20 Connection-Time VSA .18 Figure 21 Reservation-Based-Usage VSA19 Figure 22 ANID VSA .21 Figure 23 AGW-RAN-PMIP-Binding-Capability VSA .22 Figure 24 AGW-IP-Address VSA 23 X.S0054-910-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 2

29、4 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 List of Tables iv LIST OF TABLES Table 1 Occurrence of RADIUS attributes between AGW and AAA .24 Table 2 Occurrence of RADIUS attributes between HA and AAA.26 Table 3 Occurrence of RADIUS at

30、tributes between eBS/SRNC and AGW27 Table 4 3GPP2 Specific Diameter AVPs.31 Table 5 Occurrence of Diameter AVPs between AGW and AAA 38 Table 6 Occurrence of Diameter AVPs between eBS/SRNC and AGW.39 X.S0054-910-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 3

31、1 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 v Revision HistoryREVISION HISTORY Revision Date Remarks 0 v1.0 December 2007 Initial release 0 v2.0 August 2008 Bug fix release for the intial release A v1.0 May 2008 Release A X.S0054-910-A v1.0 1 2 3 4 5 6 7

32、8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Foreword vi FOREWORD (This foreword is not part of this Standard.) This document was prepared by 3GPP2 TSG-X. This document is part of a multi-

33、part document consisting of multiple parts that together describes Converged Access Network. This document is subject to change following formal approval. Should this document be modified, it will be re-released with a change of release date and an identifying change in version number as follows: X.

34、S0054-910-X version n.0 where: X an uppercase numerical or alphabetic character 0, A, B, C, that represents the revision level. n a numeric string 1, 2, 3, that indicates an point release level. This document uses the following conventions: “Shall” and “shall not” identify requirements to be followe

35、d strictly to conform to this document and from which no deviation is permitted. “Should” and “should not” indicate that one of several possibilities is recommended as particularly suitable, without mentioning or excluding others, that a certain course of action is preferred but not necessarily requ

36、ired, or that (in the negative form) a certain possibility or course of action is discouraged but not prohibited. “May” and “need not” indicate a course of action permissible within the limits of the document. “Can” and “cannot” are used for statements of possibility and capability, whether material

37、, physical or causal. X.S0054-910-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 1.1 Scope 1 1 Introduction1 Introduction This document defines AAA Data Dictionary in th

38、e CAN system. It defines 3GPP2 specific RADIUS attributes and Diameter AVPs. It describes the AAA RADIUS attributes and Diameters AVP for different interfaces such as eBS/SRNC-AGW interface, AGW-AAA interface, HA-AAA interface etc. 1.1 Scope This part describes the AAA Data Dictionary in the CAN sys

39、tem. It defines the AAA RADIUS attributes and Diameters AVP used in CAN system X.S0054-910-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 2 References 2 2.1 Normative Re

40、ferences2 References 2.1 Normative References This section provides references to other specifications and standards that are necessary to implement this document. 1 IETF: RFC3588, Calhoun, et.al., “Diameter Base Protocol”, September 2003. 2 IETF: RFC4005, Calhoun, et.al., “Diameter Network Access S

41、erver Application”, August 2005. 3 3GPP2: X.S0054-100-0 v2.0, lBasic IP Services for Converged Access Network Specification”, August 2008. 4 3GPP2: X.S0011-005-D v1.0, “cdma2000 Wireless IP Network Standard: Accounting Services and 3GPP2 RADIUS VSAs”, February 2006. 5 3GPP2: C.S0084-0 v2.0, “Ultra M

42、obile Broadband (UMB) Air Interface”, September 2007. 6 3GPP2: X.S0028-200-0, v1.0, “cdma2000 Packet Data Services: Wireless Local Area Network (WLAN) Interworking - Access to Operator Service and Mobility”, April 2007. 7 IETF: RFC2865, Rigney, C., Willens, S., Rubens, A. and W. Simpson, “Remote Aut

43、hentication Dial in User Service (RADIUS)”, June 2000. 8 IETF: RFC2548, Zorn, G., “Microsoft Vendor-specific RADIUS Attributes”, March 1999. 9 IETF: RFC2869, Rigney, et.al., “RADIUS Extensions”, June 2000. 10 IETF: RFC3162, Aboba, et.al., “RADIUS and IPv6”, August 2001. 11 3GPP2: X.S0044-0 v1.0, “Mo

44、bile IPv4 Enhancement”, TBD Editor Note: The above document is a work in progress and should not be referenced unless and until it is approved and published. Until such time as this Editors Note is removed, the inclusion of the above document is for informational purposes only. 12 IETF: draft-gaonka

45、r-radext-erp-attrs Editor Note: The above document is a work in progress and should not be referenced unless and until it is approved and published. Until such time as this Editors Note is removed, the inclusion of the above document is for informational purposes only. 13 IETF: draft-dondeti-dime-er

46、p-diameter Editor Note: The above document is a work in progress and should not be referenced unless and until it is approved and published. Until such time as this Editors Note is removed, the inclusion of the above document is for informational purposes only. 14 IETF: RFC2866, Rigney. C, “RADIUS A

47、ccounting”, June 2000. 15 IETF: RFC 4072, Eronen, et.al, “Diameter Extensible Authentication Protocol (EAP) Application”, August 2005. X.S0054-910-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

48、 53 54 55 56 57 58 59 60 2.2 Informative References 3 2 References16 IETF: RFC4282, Aboba, “The Network Access Identifier”, December 2005. 17 3GPP2: X.S0054-102-0 v2.0, “Multiple Authentication and Legacy Authentication Support for CAN”, August 2008. 18 3GPP2: X.S0054-000-A v1.0, “CAN Wireless IP Ne

49、twork Overview and List of Parts”, August 2008. 19 IETF: RFC3629, Yergeau, “UTF-8, a transformation format of ISO 10646”, November 2003. 20 3GPP2: X.S0054-300-0 v1.0, “QoS Support for Converged Access Network Specification”, December 2007. 21 3GPP2: X.S0054-400-0 v1.0, “Converged Access Network Accounting Specification”, December 2007. 22 3GPP2: X.S0054-110-0 v2.0, “MIP4 Specification in Converged Access Network Specification”, August 2008. 23 3GPP2: X.S0054-220-A v1.0, “Network PMIP Support”, August 2008