SANS 15614-6-2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 6 Arc and gas welding of copper and its alloys《金属材料焊接程序.pdf

《SANS 15614-6-2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 6 Arc and gas welding of copper and its alloys《金属材料焊接程序.pdf》由会员分享，可在线阅读，更多相关《SANS 15614-6-2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 6 Arc and gas welding of copper and its alloys《金属材料焊接程序.pdf（31页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21326-8 SANS 15614-6:2008Edition 1ISO 15614-6:2006Edition 1SOUTH AFRICAN NATIONAL STANDARD Specification and qualification of welding proc

4、edures for metallic materials Welding procedure test Part 6: Arc and gas welding of copper and its alloys This national standard is the identical implementation of ISO 15614-6:2006 and is adopted with the permission of the International Organization for Standardization. Published by Standards South

5、Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 15614-6:2008 Edition 1 ISO 15614-6:2006 Edition 1 Table of changes Change No. Date Scope National foreword This South African

6、 standard was approved by National Committee StanSA TC 5120.08, Welding and allied processes, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in June 2008. Reference numberISO 15614-6:2006(E)ISO 2006INTERN

7、ATIONAL STANDARD ISO15614-6First edition2006-04-01Specification and qualification of welding procedures for metallic materials Welding procedure test Part 6: Arc and gas welding of copper and its alloys Descriptif et qualification dun mode opratoire de soudage pour les matriaux mtalliques preuve de

8、qualification dun mode opratoire de soudage Partie 6: Soudage larc et aux gaz du cuivre et de ses alliages SANS 15614-6:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 15614-6:2006(E) PDF disclaimer This PDF file may contain embedded

9、typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not i

10、nfringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were

11、optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2006 All rights reserved. Unless otherwise specified

12、, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case p

13、ostale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2006 All rights reservedSANS 15614-6:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 1561

14、4-6:2006(E) ISO 2006 All rights reserved iiiContents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 2 4 Welding processes . 2 5 Preliminary welding procedure specification (pWPS) 2 6 Welding procedure test 3 7 Test piece 3 7.1 General. 3 7.2 Shape and

15、 dimensions of test pieces. 3 7.3 Welding of test pieces 4 8 Examination and testing 7 8.1 Extent of testing 7 8.2 Location and taking of test specimens 8 8.3 Non-destructive testing 8 8.4 Destructive testing 12 8.5 Acceptance levels. 13 8.6 Re-testing 13 9 Range of qualification 14 9.1 General. 14

16、9.2 Related to the manufacturer 14 9.3 Related to the parent material . 14 9.4 Common to all welding procedures 16 9.5 Specific to processes. 18 10 Welding procedure qualification record (WPQR) 18 Annex A (informative) Welding Procedure Qualification Record form (WPQR) 19 Bibliography . 22 SANS 1561

17、4-6:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 15614-6:2006(E) iv ISO 2006 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bo

18、dies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental an

19、d non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives,

20、 Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies cas

21、ting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 15614-6 was prepared by the European Committee for Standardization (CEN) Technical C

22、ommittee CEN/TC 121, Welding, in collaboration with Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 10, Unification of requirements in the field of metal welding, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). ISO 15614

23、consists of the following parts, under the general title Specification and qualification of welding procedures for metallic materials Welding procedure test: Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys Part 2: Arc welding of aluminium and its alloys Part 3: Fusi

24、on and pressure welding of non-alloyed and low-alloyed cast irons Part 4: Finishing welding of aluminium castings Part 5: Arc welding of titanium, zirconium and their alloys Part 6: Arc and gas welding of copper and its alloys Part 7: Overlay welding Part 8: Welding of tubes to tube-plate joints Par

25、t 9: Underwater hyperbaric wet welding Part 10: Hyperbaric dry welding Part 11: Electron and laser beam welding Part 12: Spot, seam and projection welding Part 13: Resistance butt and flash welding SANS 15614-6:2008This s tandard may only be used and printed by approved subscription and freemailing

26、clients of the SABS .ISO 15614-6:2006(E) ISO 2006 All rights reserved vIntroduction ISO 15614 is part of a series of standards. Details of this series are given in ISO 15607:2003, Annex A. Requests for official interpretations of any aspect of this part of ISO 15614 should be directed to the Secreta

27、riat of ISO/TC 44/SC 10 via your national standards body, a complete listing of which can be found at www.iso.org. SANS 15614-6:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .SANS 15614-6:2008This s tandard may only be used and printed b

28、y approved subscription and freemailing clients of the SABS .INTERNATIONAL STANDARD ISO 15614-6:2006(E) ISO 2006 All rights reserved 1Specification and qualification of welding procedures for metallic materials Welding procedure test Part 6: Arc and gas welding of copper and its alloys 1 Scope This

29、part of ISO 15614 specifies how a preliminary welding procedure specification is qualified by welding procedure tests. It applies to the arc and gas welding of copper and copper alloys in all product forms. This part of ISO 15614 defines the conditions for the execution of welding procedure tests an

30、d the range of qualification for welding procedures for all practical welding operations within the range of variables listed in Clause 9. This part of ISO 15614 is applicable to all new welding procedures. However, it does not invalidate previous welding procedure tests made to former national stan

31、dards or specifications. Where additional tests have to be carried out to make the qualification technically equivalent, it is only necessary to do the additional tests on a test piece made in accordance with this part of ISO 15614. Additional tests may be required by application standards. The prin

32、ciples of this part of ISO 15614 may be applied to other fusion welding processes. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the

33、 referenced document (including any amendments) applies. ISO 3452, Non-destructive testing Penetrant testing General principles ISO 4063:1998, Welding and allied processes Nomenclature of processes and reference numbers ISO 4136, Destructive tests on welds in metallic materials Transverse tensile te

34、st ISO 5173, Destructive tests on welds in metallic materials Bend tests ISO 6520-1, Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding ISO 6947, Welds Working positions Definitions of angles of slope and rotation ISO 9017, Destructive

35、 tests on welds in metallic materials Fracture test ISO 9606-3, Approval testing of welders Fusion welding Part 3: Copper and copper alloys ISO 10042:2005, Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections SANS 15614-6:2008This s tandard may only be used and prin

36、ted by approved subscription and freemailing clients of the SABS .ISO 15614-6:2006(E) 2 ISO 2006 All rights reservedISO 14175, Welding consumables Shielding gases for arc welding and cutting ISO 14732, Welding personnel Approval testing of welding operators for fusion welding and of resistance weld

37、setters for fully mechanized and automatic welding of metallic materials ISO 15607:2003, Specification and qualification of welding procedures for metallic materials General rules ISO/TR 15608, Welding Guidelines for a metallic material grouping system ISO 15609-1, Specification and qualification of

38、 welding procedure for metallic materials Welding procedure specification Part 1: Arc welding ISO 15609-2, Specification and qualification of welding procedure for metallic materials Welding procedure specification Part 2: Gas welding ISO 15613, Specification and qualification of welding procedures

39、for metallic materials Qualification based on a pre-production welding test ISO 17636, Non-destructive testing of welds Radiographic testing of fusion-welded joints ISO 17637, Non-destructive testing of welds Visual testing of fusion-welded joints ISO 17639, Destructive tests on welds in metallic ma

40、terials Macroscopic and microscopic examination of welds ISO 17659, Welding Multilingual terms for welded joints with illustrations 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 15607 apply. 4 Welding processes Arc and gas welding are covered by th

41、e following processes in accordance with ISO 4063:1998. 111 manual metal arc welding; 131 metal inert gas welding, MIG welding; 141 tungsten inert gas welding, TIG welding; 15 plasma arc welding; 311 oxy-acetylene welding. 5 Preliminary welding procedure specification (pWPS) The preliminary welding

42、procedure specification shall be prepared in accordance with ISO 15609-1 or ISO 15609-2. SANS 15614-6:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 15614-6:2006(E) ISO 2006 All rights reserved 36 Welding procedure test The making an

43、d testing of test pieces shall be in accordance with Clauses 7 and 8. The welder or welding operator who undertakes the welding procedure test satisfactorily, in accordance with this part of ISO 15614, is qualified for the appropriate range of qualification given in ISO 9606-3 or ISO 14732 providing

44、 that the relevant testing requirements are met. 7 Test piece 7.1 General The welded joint to which the welding procedure will relate in production shall be represented by making a standardized test piece or pieces, as specified in 7.2. Where the production/joint geometry requirements do not represe

45、nt the standardized test pieces as shown in this part of ISO 15614, ISO 15613 shall be used. 7.2 Shape and dimensions of test pieces 7.2.1 General The length or number of test pieces shall be sufficient to allow all required tests to be carried out. Additional test pieces, or test pieces longer than

46、 the minimum size, may be prepared in order to allow for extra testing and/or for re-testing specimens (see 8.6). For all test pieces except branch connections (see Figure 5) and fillet welds (see Figure 4), the material thickness, t, shall be the same for both plates/pipes to be welded. If required

47、 by the application standard, the direction of plate rolling shall be marked on the test piece. The thickness and/or outside pipe diameter of the test pieces shall be selected in accordance with 9.3.2.1 to 9.3.2.4. The shape and minimum dimensions of the test piece shall be as given in 7.2.2 to 7.2.

48、6. 7.2.2 Butt joint in plate with full penetration The test piece shall be prepared in accordance with Figure 1. 7.2.3 Butt weld between plates with raised edges The test piece shall be prepared in accordance with Figure 2. 7.2.4 Butt joint in pipe with full penetration The test piece shall be prepa

49、red in accordance with Figure 3. NOTE The word “pipe”, alone or in combination, is used to mean “pipe”, “tube” or “hollow section”. 7.2.5 T-joint The test piece shall be prepared in accordance with Figure 4. This may be used for fully penetrated butt welds or fillet welds. SANS 15614-6:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 15614-6:2006(E) 4 ISO 2006 All rights reserved7.2.