NAVY MS17835 REV F-2002 CONNECTOR PNEUMATIC STARTER DUCT FLANGE FEMALE《凹面法兰压缩空气起动机通道接头》.pdf

《NAVY MS17835 REV F-2002 CONNECTOR PNEUMATIC STARTER DUCT FLANGE FEMALE《凹面法兰压缩空气起动机通道接头》.pdf》由会员分享，可在线阅读，更多相关《NAVY MS17835 REV F-2002 CONNECTOR PNEUMATIC STARTER DUCT FLANGE FEMALE《凹面法兰压缩空气起动机通道接头》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、MS17835F3 December 2002SUPERSEDINGMS17835E20 June 1991DETAIL SPECIFICATION SHEETCONNECTOR, PNEUMATIC STARTER DUCT, FLANGE, FEMALEThis specification sheet is approved for use by all Departments and Agencies of the Departmentof Defense. The requirements for acquiring the product described herein shall

2、 consist of thisspecification sheet and the design and test specified herein.FIGURE 1. Flange detail dimensions.AMSC N/A Page 1 of 2 FSC 4730DISTRIBUTION STATEMENT A: Approved for public release, distribution is unlimited.INCH-POUNDProvided by IHSNot for ResaleNo reproduction or networking permitted

3、 without license from IHS-,-,-MS17835F2Notes to the figure 1.1. Unless otherwise specified on the drawing, remove burrs and break sharp edges to.003 - .015 R.2. Dimensions are in inches. Unless otherwise specified, tolerances: decimals + .010,angles + 0.5o.3. Unless otherwise specified on the drawin

4、g, all machined fillets to be .020 R.REQUIREMENTS:Material: Corrosion Resistant Steel (18-8), AISI Type 321, in accordance with specificationsSAE-AMS5510 or SAE-AMS5512. Passivate in accordance with SAE-AMS-QQ-P-35 aftermachining.Finish: All exposed surface roughness shall be 125 micro-inches Ra max

5、imum in accordancewith ASME - B46.1.Porosity test: Finished connector shall not leak when subjected to 100 PSI air pressure andsubmerged in water for 3 minutes.Notes:1 In the event of a conflict between the text of this specification sheet and the references citedherein, the text of this specificati

6、on sheet shall take precedence.2. Referenced documents shall be of the issue in effect on the date of invitation for bid.Changes from previous issue. Marginal notations are not used in this revision to identifychanges with respect to the previous issue on Form DD 672-1. In this revision, the previou

7、s MSstandard is reformatted to military specification sheet in accordance with MIL-STD-961D.CONCLUDING MATERIALCustodians: Preparing activity:Army - AV Navy - ASNavy - ASAir Force - 99 (Project: 4730 - 2344)Review activities:Army - ATNavy - MC, SAAir Force - 71DLA - CCProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-