NAVY MIL-STD-1662 C-1992 ORDNANCE ALTERATION (ORDALT) INSTRUCTIONS PREPARATION OF《预备军火改造说明》.pdf

《NAVY MIL-STD-1662 C-1992 ORDNANCE ALTERATION (ORDALT) INSTRUCTIONS PREPARATION OF《预备军火改造说明》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-STD-1662 C-1992 ORDNANCE ALTERATION (ORDALT) INSTRUCTIONS PREPARATION OF《预备军火改造说明》.pdf（93页珍藏版）》请在麦多课文档分享上搜索。

1、tNOTE: The cover page of this standard has been changed foradministrative remoms, There are no orher changes to this document. -MIL-STD-1662C(OS)2 March 1992( SUPERSEDINGMIL-STD- 1662 C(OS)25 AUGUST 1986DEPARTMENT OF DEFENSESTANDARD PRACTICEIORDNANCE ALTERATION (ORDALT)INSTRUCTIONS, PREPARATION OFAM

2、SC NO. D6722 AREA CMANDISTRIBUTION STATENIENT A. Approved for public release; distribution is unlimited.IProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1662C (OS)FOREWORD1. This military standard is approved for use by the Naval Sea Syatema Command,

3、 Departmentof the Navy, and is available for use by all Departments and Agencies of the Department of Defense.2. Beneficial comments (recommendations, additiona, deletions) and any pertinent data whichmay be used in improving this document shouId be addressed to: Commander, Indian Head D1viaion,Nava

4、l Surface Warfare Center, (Code 3730), Indian Head, MD 20640-5035 by using the Standardi-zation Improvement Proposal (DD Form 1426) appewing at the end of this document or by letter.3. ORDALT Instructions provide naval activities with all of the information necessary to effectthe rdteration of naval

5、 ordnance weapona, weapon systems, computer programs, and equipment(expendable or non-expendable) that are either its service (shipboard or shore activities) in store, orawaiting installation. Tbeae alterations include: additiona, deletiona, rework or replacement ofparta/assemblies/equipment, change

6、s in materird, and changes in the manner of assembly.4. ORDALT Instructions direct (or describe) configuration cbangea to equipment after deliveryfrom production. ORDALT Instruction numbers are rdso assigned to production-line changea tosystems or equipment to identify differences from an establishe

7、d product haaeline. Configurationstatus accounting of ORDALT applicability and accomplishment is bzscd on accurate ORDALTinstruction number identification and the revision, change, or issuance of a new ORDALT instructionin acmrdance wirJrthe provisions of this standard. ORDALT Instruction numbers ar

8、e assigned onlyto Class 1 Engineering Change Proposals (ECPS) that have been approved by proper authority. Onceissud, ORDALT instructions are subject to formal change control procedures and may not, underany circumstances, be revised or changed without the appropriate Configuration Control Board (CC

9、B)autJrority.5. ORDALT Inatroctiona are issued aa Navrd Sea Systems Command (NAVSEA) technicaldocumentation. However, the preparer of the ORDALT instruction may be a NAVSEA Code, aNAVSEA supporting field activity, another service-managed activity so directed, or a contractor.6. The tigurra appearing

10、 at the back of this standard are otdy examples. If there is any conflictbetween the text and the figures, the text applies.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-SlD1662C (OS)PARAGftAPHCONTENTSPAGEII1.1.12.2.12.1.12.1.22.22.33.3.13.23.3

11、3.43.53.63.73.7.13.7.23.83.93.103.10.13.10.23.10.33.10.43.113.124.4.14.24.34.3.14.3.24.3.34.3.44.44.54.6SCOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12、 . . . . . . . 1APPLICABLEDOCUMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Goverrmsentdocuments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Speciticstioos, standards andhrmdbooks . . . . . . . . . . . . . . . . . . . . . . . . . . .2Other Goverm

13、rtent documents, drawiogs rmdpublicatioos . . . . . . . . . . . . . . . . . . 3Noove-etpublimtiom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ,Orderofprecedence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5DEFINITIONS . . . . . . . . . . . . . .

14、 . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Combatsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Computerprogrsm (ordnance) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Field Change(FC) . . . . . . . . . . . . . . . . . . .

15、. . . . . . . . . . . . . . . . . . . . . . . 6Latentdefcct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6MaintertsnceAssistsnceModule(MAM) . . . . . . . . . . . . . . . . . . . . . . . . . .6Ordnanceskeration(ORDALT) . . . . . . . . . . . . . . . . . . . .

16、. . . . . . . .6ORDALTlmsUuction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6ShortformatORDALT instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6LongformatORDALT instmction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7ORDALTKlt . .

17、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Shiprdteration(SHIPALT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Instsllatio

18、namdcheckoutspsres. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Initialspsres. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Interirnspsres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Coordimted Shipb

19、oard AllowrmceList (COSAL)spsrcs . . . . . . . . . . . . . . . . . . . 7SurvivabilityORDALT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Abbreviations sndacronymsused intlsisdocument . . . . . . . . . . . . . . . . . . . . . . 8GENERALREQUIREMENTS . . . . . . . . .

20、. . . . . . . . . . . . . . . . . . . . . . . . 11General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Minorshipbaardw oak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Securityclsssification . . . . . . . . . . .

21、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Oversll classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Classificstionoftitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Clsssiticstionofpages . . . . . .

22、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Downgrading/declassification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Distributionstatemen or changea in assembly procedures. ordnanceassociated mmputer program slteratiom include the iocmporatioo of dif

23、ferent computer programversiona, approved modification or corrections to both operational teat and maintenance programs. AnORDALT is the result of art approval Class I Engineering Change Proposst (ECP) prepared andprocessed in accordance wirJr MIL-STD480 or MIL-STIM81.3.7 ORDALT Instruction. An ORDA

24、LT instruction is a technical document that cootsins thedetailed insttuctioms, teat procedures, provisioning information, support documentation, aad otherrelated information required to perform and support an ORDALT.3.7.1 Short format ORDALT instruction. A “short format” ORDALT instruction is aninst

25、ruction that covers an alteration that satisfies tire following criteriaa. The stteration does not affect the spare parta rdlowrmce of the equipment involved,b. The alteration does not affect the weight and moment of the ship in which installed,6Provided by IHSNot for ResaleNo reproduction or networ

26、king permitted without license from IHS-,-,-MILSIW1662C (OS)c. The alteration does not require the accomplishment of an associated SHIPALT, aadd. Tire rdteration does not require the furnishing of an ORDALT kit of material foraccomplishment.3.7.2 Long format ORDALT irrstruetion. A “long format” ORDA

27、LT instruction is aniaatnwtion that covers an altemtion that satisfies one or more of the following criteriaa. The rdteration may affect the spare parts allowance of the equipment involved,b. llte alteration may affect tfre weight end moment of the ship io which installed,c. The alteration may requi

28、re the accomplishment of an associated SHIPALT, orI d. The aIteration may require the furnishing of an ORDALT kit of materisd fnraccomplishment.3.8 ORDALT Kit. An ORDALT kit is err assemblage of materials and documentation required toperform an alteration aad to supply Mltisl repair parts to povide

29、on-board support. The M for acomputer program ORDALT consists of program tapes, discs and ancillary materials required toperform a wmputer program modification or wrrcction.3.9 Ship alteration (SHfPALT). Any change in the hull, machinery, equipment, or fittings tJratinvolves change in design, materi

30、als, number, location, or relationship of the component parla of anassembly.3.10 Spar=.3.10.1 Installation and checkout spares. Installation and checkout spares are parta used by theinstalling agent in acwmplishment and checkout of an alteration.3.10.2 Initial spares. Initial spares are onbosrd repa

31、ir parts acquired as part of tie OROALT kitthat are used prior to full Navy Supply support.3.103 Interim sparea. Interim aparea are repair parta, provided and controlled by the technicalmanager, to be USIAto augment initial spares prior to full Navy Supply support.3.10.4 Coordinated Shipboard Allowa

32、nce LLvt(COSAL) spar=. Sparea provided through theNavy Supply System to support COSAL.3.11 Survivability ORDALT. Any OROALT “hat provides a system or equipment with the alilityto sustain damage iacorred by attack, shock, or other types of influence from outside activities andremain operable, for exa

33、mple, alterations providing improved or new shock mounts, armor protection,protected cable ways, rmd solid state components or upgraded material whose requirement was identifiedspecifically by a shock test or similar event apply.7Provided by IHSNot for ResaleNo reproduction or networking permitted w

34、ithout license from IHS-,-,-MIIXIT)-1662C (0S)I 3.12 Abbreviations and acronyms used in this document. The abbreviationa and acronyms usedin this documeot are defined as follows:ACNADPAELArrAMSDLAMTANSIAPLBRFCAGEccCCBCDRLCICODE IDENTCOSALCSTOMDIDDOD or DoDDODISSDOPECECPEICEMFESDESDSFARFCFCSFMPFSCMGP

35、ETEGPOHCPlCPIEEEmIMAIPcAdvance Change NoticeAutomatic Data ProceaskrgAllowance Equipage LktAIteratioo Installation TeamAcquisition Management System and Data Requirements controlListAmalgamated Militaryecbnicaf Improvement PlanAmerican Nationat Standards InstituteAllowance Parta LktBeat Replacement

36、FactorsCommercial and Government Entity (Formerly FSCM andCODE IDENT)Classification of CharacteristicConfiguration Control BoardContract Data Requirement ListCortfration ItemCode Identification (replaced by CAGE)Coordinated Shipboard Allowance LktCombat System Technical Operations MarmstData Item De

37、scriptionDepartment of DefenseDepartment of Defense Index of Specifications and StandardsDesignated Overhaul PointEngineering ChangeEngineering Change ProposaJEquipment Identification CodeElectro Magnetic PulseElectrostatic DischargeESD SensitiveFcderat Acquisition RegulationField ChangeFire Control

38、 SystemF1eeI Modernization ProgramFederal Supply Code for Manufacturers (replaced by CAGE)General Purpose Electronic Teat EquipmentGovernment Printing OfticeHardness Critical ProcesInventory Control PoiotInstitute of Eleetricat arrd Electronic EngineersIntegrated Logistic SupportIntermediate Mainteo

39、arrce ActivityInstitute for Interconnecting and Packaging Electronic Ckcuik8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISEA1 for example:CONFIDENTIAL(This page is UNCLASSIFIED)orSECRET(This page is CONFIDENTIAL)The classification authority and d

40、eclassification schedule shall be shown at the bottom centw of the titlepage above the classification marking (see figure 1).4.32 Classification of titles. The title of the ORDALT instruction shell be identified inaccordance with OPNAVINST 5510.1 or DOD 5220.22-M, as applicable (see figure 1).4.33 C

41、laaaHication of pages. Each page (other than the title page) shall be marked according toits highest content, and this classification markhg shall be placed at top and bottom of the page, exceptwhen the classification of two pages of one sheet (the two pag= being back to back) differ, the higherclas

42、sification shall be placed on both pages (see figures 4 and 5). A blank page, backhg up a classifiedpage, shall shnw the chssitication of the classified page. UncIsssitied shems odr pages beingunclassified) shall be so marked. If tie classification shown on the last page of the ORDALTinstruction is

43、not the same as chat shown on the title page, then a blank sheet sbatl be added to the backof the instruction which shows the same classification (excluding Restricted Data notations, if applicable)as on the title page. No text shall appear on the last page of the ORDALT instruction. A blank pageshe

44、ll be provided es the last page. Overall classification shall be marked at the top and bottom center ofthe page. When any page, except a blank page, is marked with a higher classification than that assignedto its ccmtents, an explanation shall be made on that page beneatb the bottom classification m

45、arking; forexample:CONFIDENTIAL(TIsis page is UNCLASSIFIED)orSECRET(llris page is CONFIDENTIAL)4.3.4 Downgrstdirtg/decIaasiticotion. As applicable, downgrading/declsssitication markings shallbe applied in accordance widt OPNAVINST 5S10. 1 or DOD 5220.22-M, as applicable.12Provided by IHSNot for Resa

46、leNo reproduction or networking permitted without license from IHS-,-,-MILSD-1662C (OS)I 4.4 Distribution statements and export control warning notice. All classified end unclassifiedORDALT instructions shall be marked in accordance with MfL-STD-1806 and as sprzificd in 5.1.1 .Sand 5.1.1.9.4.5 ORDAL

47、T instruction idwrtification. The ORDALT instruction identification shall be pIacedon each page; at the upper right mmer of the title page (see 5.1.1.2) and at the upper canter of eachsuccessive page. Tbii identification shall be composed of the symbol “ORDALT” followed by anidentification number (A

48、rabic numerats). The ORDALT identification oumber shatl be aaaigrmd ssspecified in the contract or order (SW 6.4). changes, revisions, and supersessions to the ORDALTinstructions shall be designated as specified in 4.6.4.6 Correction of releused ORDALT instructions.4.6.1 Changea. Additions or deleti

49、oru to the text to improve clarity, make chemges in applicabilityor corrections for typographical error, or orher minor cheng= to an existing ORDALT instruction shallrequire the preparation of an ORDALT instruction change. The changed identification shall becomposed of the word, “CHANGE,” followed by a sequentially assigned Arabic numeral (see figure 6).llre change number shall appear below the ORDALT identification. If it becomes necessary to issuemore than on