NAVISTAR MPAPS D-7088-2017 Ticking Mattress Cover.pdf
《NAVISTAR MPAPS D-7088-2017 Ticking Mattress Cover.pdf》由会员分享,可在线阅读,更多相关《NAVISTAR MPAPS D-7088-2017 Ticking Mattress Cover.pdf(5页珍藏版)》请在麦多课文档分享上搜索。
1、 This document is restricted and may not be sent outside Navistar Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2017 by Navistar, Inc. JUNE 2017 Page 1 of 5 NAVISTAR, INC. Material, Parts, and Process Specifications (
2、MPAPS) NUMBER: MPAPS D-7088 Former Designation: TMS-7088 TITLE: Ticking, Mattress Cover CURRENT REV No.: 1706 DATE: JUNE 2017 WRITTEN/EDITED BY: D. Baker APPROVED BY: R. Goluch SUPERSEDES: Rev. G OCT 2007 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may in
3、volve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. 1.0
4、APPLICATION This specification covers three typical types of fabric mattress ticking which are suitable for use as covering for standard truck sleeper cab mattresses. Optional premium mattress ticking may be specified separately referencing only the performance requirements of this specification. Ty
5、pe I: Polyester/cotton/rayon Type II: Spun polyester Type III: Polyester filament/spun polyester 2.0 SCOPE This specification covers the general requirements, property and performance requirements, quality, quality, qualification, source approval, and quality control for 3 types of mattress ticking.
6、 2.1 Restricted Chemical Substances Effective January 1, 2007, all product supplied to the requirements of this specification must comply with the requirements of the MPAPS B-50 specification. 3.0 REFERENCE DOCUMENTS Unless otherwise specified the latest issue of all referenced standards shall apply
7、. The following Specifications, Standards, and Regulations are referenced in this specification. Quality System Standard ISO 9001 or TS-16949 CFR 29, Part 1910 ASTM D 1683 NAVISTAR Supplier Packing and Shipping Std. D-13 AATCC Technical Manual ASTM D 751 NAVISTAR MPAPS P-9543 NAVISTAR MPAPS P-9544 N
8、AVISTAR MPAPS B-50 NAVISTAR MPAPS GT-31 NAVISTAR Engineering Design Std. A-16 AATCC-30 ASTM D 3884 FMVSS 302 NUMBER: MPAPS D-7088 TITLE: Ticking, Mattress Cover REVISION: 1706 This document is restricted and may not be sent outside Navistar Inc. or reproduced without permission from Corporate Techni
9、cal Standards. Suppliers are required to assume all patent liability. 2017 by Navistar Inc. JUNE 2017 Page 2 of 5 4.0 GENERAL REQUIREMENTS The following are typical construction and finished weight requirements. Final requirements shall be set by agreement between the material vendor, the fabricator
10、 and Navistar IPD. 4.1 Construction Type I - Warp: 36.0 ends/cm (92 end/in) of cotton rayon. Fill: 12.6 ends/cm (32 ends/in) of polyester Type II - Warp: 33.0 end/cm (84 ends/in) of spun polyester Fill: 11.8 ends/cm (30 ends/in) of spun polyester Type III - Warp: 9.5 ends/cm (24 ends/in) of polyeste
11、r Fill: 6.3 ends/cm (16 ends/in) of spun polyester 4.2 Finished Weight Type I - Shall be 0.23 kg/m (6.9 oz/yd) minimum Type II - Shall be 0.2 to 0.22 kg/m (6.0 to 6.5 oz/yd) Type III - Shall be 0.15 to .19 kg/m (4.5 to 5.5 oz/yd) 4.3 Color Shall be equivalent in color and pattern to samples approved
12、 by the Industrial Design Department at IPD. 4.4 Property and Performance Requirements 4.4.1 Tensile Strength 4.4.1.1 Method: ASTM D 751 Grab Method 4.4.1.2 Required Types I and III - Warp/Fill: 665/290 N (150/65 lbf) minimum Type II - Warp/Fill: 1265/710 N (285/160 lbf) minimum 4.4.2 Seam Strength
13、4.4.2.1 Method: ASTM D 1683 4.4.2.2 Required Warp/Fill: 400/400 N (90/90 lbf) minimum; report thread type, stitch type and stitches per centimeter (inch). 4.4.3 Mildew Resistance 4.4.3.1 Method: AATCC-30, Sec. 2 4.4.3.2 Required No objectionable odor 4.4.4 Colorfastness 4.4.4.1 Method: AATCC Test Me
14、thod 8 Performed Wet and Dry 4.4.4.2 Required Wet: AATCC Rating 4 minimum Dry: AATCC Rating 5 minimum NUMBER: MPAPS D-7088 TITLE: Ticking, Mattress Cover REVISION: 1706 This document is restricted and may not be sent outside Navistar Inc. or reproduced without permission from Corporate Technical Sta
15、ndards. Suppliers are required to assume all patent liability. 2017 by Navistar Inc. JUNE 2017 Page 3 of 5 4.4.5 Abrasion 4.4.5.1 Method: ASTM D 3884 Rotary Platform Double Head Method. Use a CS-10 abrasion wheel with 500-gram load for 50 cycles. 4.4.5.2 Required Wear shall not exceed that of approv
16、ed master sample in the Industrial Design Department at IPD. 4.4.6 Sunlight Resistance 4.4.6.1 Method: MPAPS GT-31 Method F, expose sample 48 hours; or MPAPS GT-31 Method A for 112 kJ. 4.4.6.2 Required No sign of color alteration and tested sample shall be equivalent to approved master sample in the
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NAVISTARMPAPSD70882017TICKINGMATTRESSCOVERPDF
![提示](http://www.mydoc123.com/images/bang_tan.gif)
链接地址:http://www.mydoc123.com/p-962901.html