ITU-T Q 4008 3-2016 Malicious communication identification using IP multimedia core network subsystem Conformance test specification C Part 3 Test suite structure and test purposes.pdf

《ITU-T Q 4008 3-2016 Malicious communication identification using IP multimedia core network subsystem Conformance test specification C Part 3 Test suite structure and test purposes.pdf》由会员分享，可在线阅读，更多相关《ITU-T Q 4008 3-2016 Malicious communication identification using IP multimedia core network subsystem Conformance test specification C Part 3 Test suite structure and test purposes.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T Q.4008.3 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (08/2016) SERIES Q: SWITCHING AND SIGNALLING Testing specifications Testing specifications for SIP-IMS Malicious communication identification using IP multimedia core

2、 network subsystem; Conformance test specification Part 3: Test suite structure and test purposes; User side Recommendation ITU-T Q.4008.3 ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1Q.3 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING

3、Q.4Q.59 FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN Q.60Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4, 5, 6, R1 AND R2 Q.120Q.499 DIGITAL EXCHANGES Q.500Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699 SPECIFICATIONS OF SIGNAL

4、LING SYSTEM No. 7 Q.700Q.799 Q3 INTERFACE Q.800Q.849 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999 PUBLIC LAND MOBILE NETWORK Q.1000Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199 INTELLIGENT NETWORK Q.1200Q.1699 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.1700Q.1799

5、SPECIFICATIONS OF SIGNALLING RELATED TO BEARER INDEPENDENT CALL CONTROL (BICC) Q.1900Q.1999 BROADBAND ISDN Q.2000Q.2999 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR THE NGN Q.3000Q.3709 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR SDN Q.3710Q.3899 TESTING SPECIFICATIONS Q.3900Q.4099 Testing specifications

6、 for next generation networks Q.3900Q.3999 Testing specifications for SIP-IMS Q.4000Q.4039 Testing specifications for Cloud computing Q.4040Q.4059 For further details, please refer to the list of ITU-T Recommendations. Rec. ITU-T Q.4008.3 (08/2016) i Recommendation ITU-T Q.4008.3 Malicious communica

7、tion identification using IP multimedia core network subsystem; Conformance test specification Part 3: Test suite structure and test purposes; User side Summary Recommendation ITU-T Q.4008.3 v.1 (2016) provides the test suite structure and test purposes for the malicious communication identification

8、 (MCID) using IP multimedia (IM) core network (CN) subsystem conformance test specification for the user side (based on Recommendation ITU-T Q.3624 v.1). The version number, v.1, indicates that this is version one of Recommendation ITU-T Q.4008.3, and that it relates to Release 10 of the relevant 3G

9、PP/ETSI standard. History Edition Recommendation Approval Study Group Unique ID* 1.0 ITU-T Q.4008.3 v.1 2016-08-29 11 11.1002/1000/12998 Keywords IMS, IP multimedia subsystem, malicious communication identification, MCID, testing, test suite structure and test purposes, TSS Conformance test specific

10、ation Part 3: Test suite structure and test purposes; User side 1 Scope This Recommendation is part 3 of a multi-part deliverable covering malicious communication identification (MCID) using IP multimedia (IM) core network (CN) subsystem; conformance test specification, as identified below: Part 1:

11、“Protocol implementation conformance statement (PICS)“; Part 2: “Test suite structure and test purposes (TSS Network side“; Part 3: “Test suite structure and test purposes (TSS User side“. 2 References The following ITU-T Recommendations and other references contain provisions which, through referen

12、ce in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most re

13、cent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T Q.3624 v.1 Reco

14、mmendation ITU-T Q.3624 v.1 (2016), Malicious communication identification using IP multimedia core network subsystem Protocol specification. ITU-T Q.4008.1 Recommendation ITU-T Q.4008.1 (2016), Malicious communication identification using IP multimedia core network subsystem; Conformance test speci

15、fication Part 1: Protocol implementation conformance statement. 3 Definitions 3.1 Terms defined elsewhere For the purposes of this Recommendation, the terms and definitions given in ITU-T Q.3624 v.1 and the following apply: 3.1.1 communication information: Information collected and registered by the

16、 MCID service. 3.1.2 identity information: Includes all the information identifying a user, including trusted (network generated) and/or untrusted (user generated) identities. 3.2 Terms defined in this Recommendation None. 4 Abbreviations and acronyms This Recommendation uses the following abbreviat

17、ions and acronyms: CN Core Network 2 Rec. ITU-T Q.4008.3 (08/2016) IM IP Multimedia IMS IP Multimedia Subsystem IP Internet Protocol MCID Malicious Communication Identification MIME Multipurpose Internet Mail Extensions PICS Protocol Implementation Conformance Statement SIP Session Initiation Protoc

18、ol TP Test Purpose TSS Test Suite Structure UE User Equipment XML extensible Markup Language 5 Conventions None. 6 Test suite structure Table 6-1 Test suite structure MCID destination_UE MCID_U01_xxx 6.1 Configuration The scope of this Recommendation is to test the signalling and procedural aspects

19、of the stage 3 requirements as described in ITU-T Q.3624 v.1. Stage 3 describes the requirements for several network entities and terminal devices. Consequently, several interfaces (reference points) are addressed to satisfy the test of the different entities. In order to test the appropriate entiti

20、es the configurations below are applicable. 6.1.1 Testing of the user equipment There are special clauses in the protocol standard describing the procedures that apply at the originating and terminating user equipment (UE) as shown in the test configuration in Figure 6.1.1-1. Figure 6.1.1-1 Applicab

21、le configuration to test UE functionalities Rec. ITU-T Q.4008.3 (08/2016) 3 7 Test purpose 7.1 Introduction For each test requirement a test purpose (TP) is defined. 7.1.1 TP naming convention Test purposes (TPs) are numbered, starting at 001, within each group. Groups are organized according to the

22、 test suite structure (TSS). Additional references are added to identify the actual test suite and whether it applies to the network or the user (see Table 7.1.1-1). Table 7.1.1-1 TP identifier naming convention scheme Identifier: _ = supplementary service: e.g., “MCID“ = type of IUT: U User equipme

23、nt N Network entity = group 2 digit field representing group reference according to TSS = sequential number (001-999) 7.1.2 Test strategy As the base standard ITU-T Q.3624 v.1 contains no explicit requirements for testing. The TPs were generated as a result of an analysis of the base standard and th

24、e protocol implementation conformance statement (PICS) specification ITU-T Q.4008.1 v.1. The criteria applied include the following: Whether or not a test case can be built from the TP is not considered. 7.2 TPs for malicious communication identification 7.2.1 Actions at the destination UE TSS MCID/

25、destination_UE TP MCID_U01_001 MCID reference Clause 4.5.2.12 of ITU-T Q.3624 v.1 Selection expression PICS 4.5.1/1 AND PICS 4.6.1/1 Test purpose The UE sends a MCID request in the confirmed state Ensure that the UE is able to invoke MCID in the confirmed state. The UE sends a Re-INVITE without sess

26、ion modification and no mcid XML element is present. Preconditions: SIP header values: Re-INVITE without session modification Comments: Test equipment User equipment INVITE 100 Trying 180 Ringing 200 OK INVITE ACK Re-INVITE requesting MCID 200 OK INVITE ACK Apply post test routine 4 Rec. ITU-T Q.400

27、8.3 (08/2016) TSS MCID/destination_UE TP MCID_U01_002 MCID reference Clause 4.5.2.12 of ITU-T Q.3624 v.1 Selection expression PICS 4.5.1/1 AND PICS 4.6.1/1 Test purpose The UE sends a MCID request in the early dialogue Ensure that the UE is able to invoke MCID in the early dialogue. The UE sends a R

28、e-INVITE without session modification and no mcid XML element is present. Preconditions: SIP header values: Re-INVITE without session modification Comments: Test equipment User equipment INVITE 100 Trying 180 Ringing Re-INVITE requesting MCID 200 OK INVITE ACK Apply post test routine TSS MCID/destin

29、ation_UE TP MCID_U01_003 MCID reference Clause 4.5.2.12 of ITU-T Q.3624 v.1 Selection expression PICS 4.5.1/1 AND PICS 4.6.1/2 Test purpose The UE sends a MCID request using the XML McidRequestIndicator in the confirmed state Ensure that the UE is able to invoke MCID in the confirmed state. The UE s

30、ends a Re-INVITE without session modification. Ensure that the UE is able to send a mcid XML MIME body with the McidRequestIndicator set to 1. Preconditions: SIP header values: Re-INVITE without session modification XML mcid request McidRequestIndicator = 1 Comments: Test equipment User equipment IN

31、VITE 100 Trying 180 Ringing 200 OK INVITE ACK Re-INVITE requesting MCID 200 OK INVITE ACK Apply post test routine Rec. ITU-T Q.4008.3 (08/2016) 5 TSS MCID/destination_UE TP MCID_U01_004 MCID reference Clause 4.5.2.12 of ITU-T Q.3624 v.1 Selection expression PICS 4.5.1/1 AND PICS 4.6.1/2 Test purpose

32、 The UE sends a MCID request using the XML McidRequestIndicator in the early dialogue Ensure that the UE is able to invoke MCID in the early dialogue. The UE sends a Re-INVITE without session modification. Ensure that the UE is able to send a mcid XML MIME body with the McidRequestIndicator set to 1

33、. Preconditions: SIP header values: Re-INVITE without session modification XML mcid request McidRequestIndicator = 1 Comments: Test equipment User equipment INVITE 100 Trying 180 Ringing Re-INVITE requesting MCID 200 OK INVITE ACK Apply post test routine Printed in Switzerland Geneva, 2016 SERIES OF

34、 ITU-T RECOMMENDATIONS Series A Organization of the work of ITU-T Series D General tariff principles Series E Overall network operation, telephone service, service operation and human factors Series F Non-telephone telecommunication services Series G Transmission systems and media, digital systems a

35、nd networks Series H Audiovisual and multimedia systems Series I Integrated services digital network Series J Cable networks and transmission of television, sound programme and other multimedia signals Series K Protection against interference Series L Environment and ICTs, climate change, e-waste, e

36、nergy efficiency; construction, installation and protection of cables and other elements of outside plant Series M Telecommunication management, including TMN and network maintenance Series N Maintenance: international sound programme and television transmission circuits Series O Specifications of m

37、easuring equipment Series P Terminals and subjective and objective assessment methods Series Q Switching and signalling Series R Telegraph transmission Series S Telegraph services terminal equipment Series T Terminals for telematic services Series U Telegraph switching Series V Data communication ov

38、er the telephone network Series X Data networks, open system communications and security Series Y Global information infrastructure, Internet protocol aspects and next-generation networks, Internet of Things and smart cities Series Z Languages and general software aspects for telecommunication systems