FORD WSS-M1H778-A-2008 FABRIC ESSEX PATTERN WOVEN JACQUARD TO BE USED WITH FORD WSS-M99P1111-A 《埃塞克斯郡（ESSEX）图案的提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD WSS-M1H778-A-2008 FABRIC ESSEX PATTERN WOVEN JACQUARD TO BE USED WITH FORD WSS-M99P1111-A 《埃塞克斯郡（ESSEX）图案的提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M1H778-A-2008 FABRIC ESSEX PATTERN WOVEN JACQUARD TO BE USED WITH FORD WSS-M99P1111-A 《埃塞克斯郡（ESSEX）图案的提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 17 N-STATUS No Replacement B. Haggart, FNA 2003 02 19 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3,3, 3.9, 3.10, 4 deleted 1998 03 16 Activated L. Daniv-Zarewych Printed copies are uncontrolled Page

2、1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, ESSEX PATTERN, WOVEN JACQUARD WSS-M1H778-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard pattern polyester face fabric of good quality and uniform composition which can be flame lami

3、nated to polyester or polyether urethane foam and backed either a knitted fabric or a polyurethane film. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 1998 1/2 FAB BE91 popular models. 3. REQUIREMENTS In addition to the requirements listed

4、 herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/-

5、5 % tolerance (ASTM D 3775) Warp 220 ends/10 cm Fill 280 picks/10 cm 3.4.2 Fabric Weight, range 280 - 300 g/m2(FLTM BN 106-01) ENGINEERING MATERIAL SPECIFICATION WSS-M1H778-A Page 2 of 2 Copyright 2008, Ford Global Technologies, Inc. 3.5 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A

6、1/A4. Fabric 100 % polyester Backcoating 100 % polyester or 100 % polyamide 3.6 YARN CONSTRUCTION (ASTM D 1244) Warp 550 dtex f70 (polyester, semi-dul, air texturized, blue) Fill 850 dtex f228 (polyester, semi-dul, air texturized, green) 3.7 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.8 FINISHING OPERATIONS As approved by Materials Engineering