FORD WSS-M1H1147-A-2008 FABRIC KENSINGTON PATTERN FLAT WOVEN 25% MINIMUM POST INDUSTRIAL CONTENT TO BE USED WITH FORD WSS-M99P1111-A 《肯辛顿(KENSINGTON)花型平织25% 最低后工业含量的面料(与FORD WSS-.pdf

《FORD WSS-M1H1147-A-2008 FABRIC KENSINGTON PATTERN FLAT WOVEN 25% MINIMUM POST INDUSTRIAL CONTENT TO BE USED WITH FORD WSS-M99P1111-A 《肯辛顿(KENSINGTON)花型平织25% 最低后工业含量的面料(与FORD WSS-.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M1H1147-A-2008 FABRIC KENSINGTON PATTERN FLAT WOVEN 25% MINIMUM POST INDUSTRIAL CONTENT TO BE USED WITH FORD WSS-M99P1111-A 《肯辛顿(KENSINGTON)花型平织25% 最低后工业含量的面料(与FORD WSS-.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver 1 2008 06 25 Activated M. Dumitrescu, FNA Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, KENSINGTON PATTERN, FLAT WOVEN 25% MINIMUM WSS-M1H1147-A POST INDUSTRIAL CONTENT 1. SCOPE The mate

2、rial defined by this specification is a KENSINGTON pattern, Dobby, flat woven bodycloth of good quality and uniform composition. The fabric is backcoated. 2. APPLICATION This specification was released originally for material used as a seat fabric, insert application for 2010 D258 Taurus. 3. REQUIRE

3、MENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A) 3.2 F

4、ABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 287 ends/10 cm Fill 122 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric 325 g/m2 Backcoat 30 g/m2 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 87% Polyester, 13

5、% Nylon Backcoating Acrylic ENGINEERING MATERIAL SPECIFICATION WSS-M1H1147-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 16.7 tex f48 (false twist polyester) x 3 Fill 85 tex f192 (air texture 100% PI polyester yar

6、n) x 1 172 tex (flock 100% PA 6.6) x 1 3.5 METHOD OF DYEING Solution dye/yarn-package dye 3.6 FINISHING OPERATIONS Warping, weaving, backcoated, heat set 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase department will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.