FORD ESF-M3P11-A-2006 PHOSPHATE COATING MANGANESE IRON - WEAR RESISTANCE TO BE USED WITH FORD WSS-M99P1111-A 《耐磨锰铁磷化护层 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD ESF-M3P11-A-2006 PHOSPHATE COATING MANGANESE IRON - WEAR RESISTANCE TO BE USED WITH FORD WSS-M99P1111-A 《耐磨锰铁磷化护层 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD ESF-M3P11-A-2006 PHOSPHATE COATING MANGANESE IRON - WEAR RESISTANCE TO BE USED WITH FORD WSS-M99P1111-A 《耐磨锰铁磷化护层 与标准FORD WSS-M99P1111-A一起使用 》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 11 17 N-STATUS Re-activated back to N-Status R. Lord2005 02 21 INACTIVATED See Material Engineer for replacement METS Cr6+ Team 1963 07 30 Activated Released F6-1093 Printed copies are uncontrolled Copyright 2006, Ford Global Technologies

2、, LLC Page 1 of 1 PHOSPHATE COATING, MANGANESE IRON - WEAR RESISTANCE ESF-M3P11-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE This specification defines a manganese iron phosphate coating. 2. APPLICATION This specification was released originally for a coating to hold lubricants especially for break in p

3、eriods on engine parts, to reduce wear on moving parts and for mile corrosion resistance. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform t

4、o the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.3 FINISH The coating shall be uniform throughout when using M3B40-A, manganese phosphate, according to process specification PL 53-02, manganese iron phosphate coating for wear resistance, or by an equivalent method. 3

5、.4 FILM THICKNESS Must have complete coverage The film characteristics are controlled by pre-cleaning, type of metal; by time in, temperature of, and concentration of solution. 3.5 RUST PROTECTION After phosphate coating, parts may be protected from corrosion by use of one of the following: 3.5.1 For in Process Storage Protection M3C83-A Standard Soluble Oil - Petroleum Base 3.5.2 For Long Time Storage Protection ESF-M7C31-A - Rust Preventive Compound 3.6 COATING The coating on parts must have a similar crystalline structure to that of the original approved sample.