ETSI TS 129 164-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Interworking between the 3GPP CS domain with BICCSI.pdf

《ETSI TS 129 164-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Interworking between the 3GPP CS domain with BICCSI.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 129 164-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Interworking between the 3GPP CS domain with BICCSI.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 129 164 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Interworking between the 3GPP CS domain with BICC or ISUP as signalling protocol and external SIP-I networks (3GPP TS 29.164 version 15.0.0 Release 15) T

2、ECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 129 164 V15.0.0 (2018-07)13GPP TS 29.164 version 15.0.0 Release 15Reference RTS/TSGC-0329164vf00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65

3、47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in

4、 print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of t

5、he Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https

6、:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, ele

7、ctronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018.

8、All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of it

9、s Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 129 164 V15.0.0 (2018-07)23GPP TS 29.164 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been dec

10、lared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, whic

11、h is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in

12、 ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for

13、 any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. For

14、eword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the co

15、rresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “c

16、annot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 129 164 V15.0.0 (2018-07)33GPP TS 29.164 version 15.0.0 Rel

17、ease 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 8g34 Network characteristics 8g34.1 Key characteristics of ISUP/BICC based CS Domain . 8g34.2

18、Key characteristics of external SIP-I network 8g35 Interworking reference model 9g36 Control plane interworking 9g36.1 General . 9g36.2 Interworking between CS Domain using ISUP signalling and external network using SIP-I signalling . 10g36.2.1 Control Plane Interworking 10g36.2.2 Services performed

19、 by network entities in the control plane 11g36.2.2.1 Services of the IWU 11g36.2.2.2 Services of the external SIP-I signalling function . 11g36.2.3 Signalling interactions between network entities in the control plane 11g36.2.3.1 Signalling between the IWU and SIP-I signalling function 11g36.2.4 SI

20、P-ISUP protocol interworking . 11g36.2.4.1 Incoming call interworking from SIP-I to ISUP at I-IWU 11g36.2.4.1.0 General 11g36.2.4.1.1 Interworking of received ISUP messages to SIP messages . 11g36.2.4.1.2 Receipt of encapsulated ISUP information within SIP 11g36.2.4.1.3 Special Procedures for the Re

21、ception of SIP INVITE request 12g36.2.4.1.3.1 Propagation of overlap signalling toward the 3GPP CS domain . 12g36.2.4.1.3.2 Derivation of TMR, USI and HLC parameters within send IAM message . 12g36.2.4.1.3.3 Receipt of SIP INVITE without SDP offer 12g36.2.4.2 Outgoing Call Interworking from ISUP to

22、SIP-I at O-IWU . 13g36.2.4.2.1 General 13g36.2.4.2.2 Sending of ISUP information to adjacent SIP nodes . 13g36.2.4.2.3 Receipt of encapsulated ISUP information within SIP-I . 13g36.2.4.2.4 Special procedures related to outgoing INVITE 13g36.2.4.2.4.1 Overlap Signalling . 13g36.2.4.2.4.2 Coding of en

23、capsulated ISUP IAM parameters in outgoing INVITE 14g36.2.4.2.4.3 Media offered in SDP of outgoing INVITE . 14g36.3 Interworking between CS Domain using BICC signalling and external network using SIP-I signalling . 14g36.3.1 Control Plane Interworking 14g36.3.2 SIP-BICC protocol interworking 15g36.3

24、.2.1 General 15g36.3.2.2 Incoming call interworking from SIP to BICC at I-IWU 15g36.3.2.3 Outgoing Call Interworking from BICC to SIP at O-IWU . 15g36.4 Supplementary services 15g36.4.1 Special procedures for supplementary service interworking 15g36.4.2 Interworking of CLIP/CLIR supplementary servic

25、e . 16g36.4.3 Interworking of Call Hold (HOLD) supplementary service . 16g36.4.4 Interworking of Completion of Calls to Busy Subscriber (CCBS) supplementary service to SIP networks 16g37 User plane Interworking . 16g3ETSI ETSI TS 129 164 V15.0.0 (2018-07)43GPP TS 29.164 version 15.0.0 Release 157.1

26、ISUP based CS Domain . 16g37.2 BICC based CS Domain . 16g38 Interactions between control node and MGW 17g38.1 Overview 17g38.2 Signalling interactions 17g38.2.1 Backward through-connection for outgoing call interworking from BICC to SIP at O-IWU. . 17g38.2.2 Handling of RTP telephone events . 17g38.

27、3 Signalling procedures . 18g3Annex A (normative): Codec Negotiation between a BICC based CS Domain and an external SIP-I network 19g3Annex B (informative): Change history . 20g3History 21g3ETSI ETSI TS 129 164 V15.0.0 (2018-07)53GPP TS 29.164 version 15.0.0 Release 15Foreword This Technical Specifi

28、cation has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG wit

29、h an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for

30、all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 129 164 V15.0.0 (2018-07)63GPP TS 29.164 version 15.0.0 Release 151 Scope The present document defines i

31、nterworking procedures between a 3GPP CS domain (see 3GPP TS 23.205 2) which applies either BICC or ISUP as signalling protocol, and external networks that use SIP-I (see ITU-T Q.1912.5 20, Profile C) as signalling protocol. The document also describes the related interworking architecture. The cont

32、rol plane interworking is performed by an interworking unit at the interconnection between the 3GPP CS domain and an external SIP-I network. The user plane interworking is performed by an MGW. The present document defines stage 2 procedures for the control of the MGW. The present specification reuse

33、s existing interworking procedures of 3GPP TS 29.163 4 and ITU-T Q.1912.5 20, Profile C, as far as possible. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by dat

34、e of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitl

35、y refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 23.205: “Bearer-independent circuit-switched core network; Stage 2“. 3 3GPP TS 26.102: “Adaptive Multi-Rate (AMR) speech codec; Interface to

36、Iu and Uu“. 4 3GPP TS 29.163: “Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks”. 5 3GPP TS 29.205: “Application of Q.1900 series to Bearer Independent CS Network architecture; Stage 3“. 6 3GPP TS 29.332: “Media Gateway Control Function (MGCF

37、) IM-Media Gateway (IM-MGW) interface, Stage 3“. 7 3GPP TS 29.414: “Core network Nb data transport and transport signalling“. 8 3GPP TS 29.415: “Core network Nb interface user plane protocols“. 9 ITU-T Recommendation E.164 (05/1997): “The international public telecommunication numbering plan“. 10 IT

38、U-T Recommendation G.711 (11/98): “Pulse Code Modulation (PCM) of voice frequencies“. 11 ITU-T Recommendation H.248.1 (05/02): “Gateway control protocol: Version 2“. 12 ITU-T Recommendation I.363.5 (1996): “B-ISDN ATM Adaptation Layer specification: Type 5 AAL“. 13 ITU-T Recommendation Q.701 (03/93)

39、, Q.702 (11/88), Q.703 (07/96), Q.704 (07/96), Q.705 (03/93), Q.706 (03/93), Q.707 (11/88), Q.708 (03/99), Q.709 (03/93): “Functional description of the message transfer part (MTP) of Signalling System No. 7“. ETSI ETSI TS 129 164 V15.0.0 (2018-07)73GPP TS 29.164 version 15.0.0 Release 1514 ITU-T Re

40、commendation Q.730 (12/99), Q.731.1 (07/96), Q.731.3 (03/93), Q.731.4 (03/93), Q.731.5 (03/93), Q.731.6 (03/93), Q.731.7 (06/97), Q.731.8 (02/92), Q.732.5-2 (12/99), Q.732.7 (07/96), Q.733.1 (02/92), Q.733.2 (03/93), Q.733.3 (06/97), Q.733.4 (03/93), Q.733.5 (12/99), Q.734.1 (03/93), Q.734.2 (07/96)

41、, Q.735.1 (03/93), Q.735.3 (03/93), Q.735.6 (07/93), Q.736.1 (10/95), Q.736.3 (10/95), Q.737.1 (06/97): “ISDN user part supplementary services“. 15 ITU-T Recommendations Q.761to Q.764 (12/99): “Signalling System No.7 ISDN User Part“. 16 ITU-T Recommendation Q.765 (2000): “Signalling System No. 7 App

42、lication transport mechanism“. 17 ITU-T Recommendation Q.765.5 (2000): “Signalling system No. 7 Application transport mechanism: Bearer Independent Call Control (BICC)“. 18 ITU-T Recommendation Q.850 (1998): “Usage of cause and location in the Digital Subscriber Signalling System No. 1 and the Signa

43、lling System No. 7 ISDN User Part“. 19 ITU-T Recommendations Q.1902.1 to Q.1902.6 (07/2001): “Bearer Independent Call Control“. 20 ITU-T Recommendation Q.1912.5 (03/04): “Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control Protocol or ISDN User Part“. 21 ITU-T

44、Recommendation Q.2110 (1994): “B-ISDN ATM adaptation layer - Service Specific Connection Oriented Protocol (SSCOP)“. 22 ITU-T Recommendation Q.2140 (1995): “B-ISDN ATM adaptation layer - Service specific coordination function for signalling at the network node interface (SSCF AT NNI)“. 23 ITU-T Reco

45、mmendation Q.2210 (1996): “Message transfer part level 3 functions and messages using the services of ITU-T Recommendation Q.2140“. 24 IETF RFC 791: “Internet Protocol“. 25 IETF RFC 768: “User Datagram Protocol“. 26 IETF RFC 793: “Transmission Control Protocol“. 27 IETF RFC 2460: “Internet Protocol,

46、 Version 6 (IPv6) Specification“ 28 IETF RFC 4733: “RTP Payload for DTMF Digits, Telephony Tones and Telephony Signals“. 29 IETF RFC 2960: “Stream Control Transmission Protocol“. 30 IETF RFC 2976: “The SIP INFO Method“. 31 IETF RFC 3204: “MIME media types for ISUP and QSIG Objects“. 32 IETF RFC 3261

47、: “SIP: Session Initiation Protocol“. 33 IETF RFC 3262: “Reliability of provisional responses“. 34 IETF RFC 3264: “An Offer/Answer Model with the Session Description Protocol (SDP)“. 40 IETF RFC 3311: “SIP UPDATE method“. 35 IETF RFC 3312: “Integration of Resource Management and Session Initiation P

48、rotocol (SIP)“. 36 IETF RFC 3550: “RTP: A Transport Protocol for Real-Time Applications“. 37 3GPP TS 29.202: “Core Signalling System No. 7 (SS7) signalling transport in core network; Stage 3“. 38 3GPP TS 29.231: “Application of SIP-I Protocols to Circuit Switched (CS) core network architecture; Stag

49、e 3“. 39 3GPP TS 29.235: “Interworking between the 3GPP CS domain with SIP-I as signalling protocol and other networks“. ETSI ETSI TS 129 164 V15.0.0 (2018-07)83GPP TS 29.164 version 15.0.0 Release 153 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 1, in 3GPP TS 29.163 4, in ITU-T E.164 9, in ITU-T Q.1912.5 20 and the following apply. A term defined in the present document takes pr