ETSI TS 103 246-5-2017 Satellite Earth Stations and Systems (SES) GNSS based location systems Part 5 Performance Test Specification (V1 2 1 Includes Diskette)《卫星地球站和系统(SES) 基于定位系统的_1.pdf

《ETSI TS 103 246-5-2017 Satellite Earth Stations and Systems (SES) GNSS based location systems Part 5 Performance Test Specification (V1 2 1 Includes Diskette)《卫星地球站和系统(SES) 基于定位系统的_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 103 246-5-2017 Satellite Earth Stations and Systems (SES) GNSS based location systems Part 5 Performance Test Specification (V1 2 1 Includes Diskette)《卫星地球站和系统(SES) 基于定位系统的_1.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 103 246-5 V1.2.1 (2017-03) Satellite Earth Stations and Systems (SES); GNSS based location systems; Part 5: Performance Test Specification TECHNICAL SPECIFICATION floppy3ETSI ETSI TS 103 246-5 V1.2.1 (2017-03)2 Reference RTS/SES-00410 Keywords GNSS, location, MSS, navigation, performance, r

2、eceiver, satellite, system, terminal ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The presen

3、t document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI.

4、 In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the

5、 document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: htt

6、ps:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not b

7、e modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the be

8、nefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 103 246-5 V1.2.1 (2017-03)3 Contents Intellectual Property Ri

9、ghts 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 7g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 10g33.3 Abbreviations . 10g34 General . 11g34.1 GBLS Performance Featur

10、es 11g34.2 Conformance Test Statistics . 11g34.3 GBLS Performance Class Determination . 11g35 General test conditions . 11g35.1 Introduction 11g35.2 Environmental conditions . 12g35.3 GNSS signal conditions 12g35.3.1 Applicable GNSS constellations . 12g35.3.2 GNSS signal level . 12g35.3.3 GNSS frequ

11、ency . 12g35.3.4 GNSS Multi-system Time Offsets 12g35.4 Operational Environments 12g35.5 Assistance Data 12g35.6 Differential Data . 13g35.7 Test Configurations 13g35.7.1 General Set-Up . 13g35.7.2 GNSS Signal Generator 13g35.7.3 Sensor Simulators/Stimulators 14g35.7.4 Telecoms RF Simulators . 14g35

12、.7.5 GBLS output measurement data . 14g36 Horizontal and Vertical Position Accuracy 15g36.1 Test Objectives Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (htt

13、ps:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, esse

14、ntial to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document is part 5 of a multi-part deliverable covering GNSS-based Location Systems (GBLS), as identified in part 1 1. Modal

15、 verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NO

16、T allowed in ETSI deliverables except when used in direct citation. Introduction The increasing expansion of location-based applications aims to satisfy more and more complex and diversified user requirements: this is highlighted for example by the widespread adoption of multi-functional smart-phone

17、s or by the ever wider adoption of tracking devices (e.g. in transport), etc. This requirement for new and innovative location-based applications is generating a requirement for increasingly complex location systems. The wide spectrum of location-based applications identified in ETSI TR 103 183 i.1

18、calls for a new and broader concept for location systems, taking into account solutions in which GNSS technologies are complemented with other technologies to improve robustness and performance. The notion of GNSS-based location systems is introduced and defined in the present document. Additional c

19、lauses and information related to the implementation in GNSS-based location systems of the various differential GNSS technologies, namely D-GNSS, RTK and PPP are also included in order to facilitate the use of this set of standards by manufacturers and service providers. ETSI ETSI TS 103 246-5 V1.2.

20、1 (2017-03)7 1 Scope This multi-part deliverable addresses integrated GNSS based location systems (GBLS) that combine Global Navigation Satellite Systems (GNSS), with other navigation technologies, as well as with telecommunication networks in order to deliver location-based services to users. As a

21、consequence the present document is not applicable to GNSS only receivers. The present document specifies the procedures for testing conformance of complex GNSS based Location System (GBLS) with the performance requirements specified in ETSI TS 103 246-3 3. This multi-part deliverable proposes a lis

22、t of functional and performance requirements and related test procedures. For each performance requirement, different classes are defined allowing the benchmark of different GNSS Based Location Systems (GBLS) addressing the same applications. The tests specified are of a complete GBLS, considered as

23、 “Black Box“ i.e. the tests are made at outputs of the system in response to stimuli applied at the inputs. The tests are defined for laboratory testing only, and not in the “field“. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or editio

24、n number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected locat

25、ion might be found at https:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 10

26、3 246-1: “Satellite Earth Stations and Systems (SES); GNSS based location systems; Part 1: Functional requirements“. 2 ETSI TS 103 246-2: “Satellite Earth Stations and Systems (SES); GNSS based location systems; Part 2: Reference Architecture“. 3 ETSI TS 103 246-3: “Satellite Earth Stations and Syst

27、ems (SES); GNSS based location systems; Part 3: Performance requirements“. 4 ETSI TS 103 246-4: “Satellite Earth Stations and Systems (SES); GNSS based location systems; Part 4: Requirements for location data exchange protocols“. 2.2 Informative references References are either specific (identified

28、by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause

29、were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TR 103 183: “Satellite Earth Stations an

30、d Systems (SES); Global Navigation Satellite Systems (GNSS) based applications and standardisation needs“. ETSI ETSI TS 103 246-5 V1.2.1 (2017-03)8 i.2 ETSI TS 137 571-1: “Universal Mobile Telecommunications System (UMTS); LTE; Universal Terrestrial Radio Access (UTRA) and Evolved UTRA (E-UTRA) and

31、Evolved Packet Core (EPC); User Equipment (UE) conformance specification for UE positioning; Part 1: Conformance test specification (3GPP TS 37.571-1)“. i.3 IEEE 802.11: “IEEE Standard for Information technology-Telecommunications and information exchange between systems Local and metropolitan area

32、networks-Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications“. i.4 IEEE 802.15.1: “IEEE Standard for Telecommunications and Information Exchange Between Systems - LAN/MAN - Specific Requirements - Part 15: Wireless Medium Access Control (MA

33、C) and Physical Layer (PHY) Specifications for Wireless Personal Area Networks (WPANs)“. i.5 IEEE 802.15.4a: “IEEE Standard for Information technology- Local and metropolitan area networks- Specific requirements- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications

34、 for Low-Rate Wireless Personal Area Networks (WPANs): Amendment 1: Add Alternate PHY“. i.6 ETSI TS 145 001: “Digital cellular telecommunications system (Phase 2+); Physical layer on the radio path; General description (3GPP TS 45.001)“. i.7 ETSI TS 125 104: “Universal Mobile Telecommunications Syst

35、em (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104)“. i.8 ETSI TS 136 171: “LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Requirements for Support of Assisted Global Navigation Satellite System (A-GNSS) (3GPP TS 36.171)“. i.9 M.M. Desu, D. Raghavarao: “No

36、n-parametric Statistical Methods For Complete and Censored Data“, CRC press, 29thSeptember 2003. i.10 RINEX: “The Receiver Independent Exchange Format“, Version 2.10. i.11 RINEX: “The Receiver Independent Exchange Format“, Version 3.02. 3 Definitions, symbols and abbreviations 3.1 Definitions For th

37、e purposes of the present document, the terms and definitions given in ETSI TS 103 246-1 1 and the following apply: accuracy (or error): difference between a measured or estimated value and its real value almanac: information providing coarse orbit and coarse clock model information for GNSS satelli

38、tes. Database providing location information for a reference network used for positioning assistance: use of position data from, typically, a telecommunications network to enable a GBLS to acquire the GNSS signals and to calculate position more quickly (e.g. A-GNSS) availability: percentage of time

39、when a location system is able to provide the required location-related data class A, B, C: classes categorize the performance level of the GBLS for a given performance feature NOTE: In all cases Class A is the highest performance class and C is the lowest. cold-start: condition of the GBLS GNSS rec

40、eiver having no accurate prior information on the position, velocity and time of the location target, or on the positions of any of the GNSS satellites continuity: likelihood that the the location system functionality will be available during the complete duration of the intended operation if the sy

41、stem is operational at the beginning of the operation ETSI ETSI TS 103 246-5 V1.2.1 (2017-03)9 D-GNSS: technique aiming at enhancing position accuracy and integrity of a GNSS receiver by using differential pseudorange corrections and “do not use flag“ for faulty satellites delivered by a GNSS refere

42、nce station located at a known location NOTE: In the present document, the term D-GNSS refer to conventional differential GNSS. electromagnetic interference: any source of RF transmission that is within the frequency band used by a communication link, and that degrades the performance of this link e

43、stimator: rule in statistics for calculating an estimate of a given quantity based on observed data GNSS-based location system (GBLS): location system using GNSS as the primary source of positioning GNSS only receiver: location receiver using GNSS as the unique source of positioning GNSS Signal Gene

44、rator (GSG): device or system capable of generating simulated GNSS satellite transmissions in order to create the required test environment for the GNSS sensor under test integrity: measure of the trust in the accuracy of the location-related data provided by the location system and the ability to p

45、rovide timely and valid warnings to users when the location system does not fulfil the condition for intended operation NOTE: Integrity is expressed through the computation of a protection level. The Integrity function is designed to deliver a warning (or alert) of any malfunction to users within a

46、given period of time (time-to-alert). Related to the Integrity concept, a Loss of Integrity event occurs when an unsafe condition (i.e. a positioning error higher than the protection level) occurs without a warning to the users for a time longer than the time-to-alert limit. jamming: deliberate tran

47、smission of interference to disrupt communications location: 3-dimensional position or location location-based application: application which is able to deliver a service to one or several users, built on the processing of the location information (location-related data) related to one or several ta

48、rgets location-related data: set of data associated with a given location target, containing at least one or several of the following time-tagged information elements: location target position, location target motion indicators (velocity and acceleration), and Quality of Service indicators (estimate

49、s of the position accuracy, reliability or authenticity) location system: system responsible for providing to a location based application the location-related data of one or several location targets location target: physical entity (mobile or stationary) whose position is the focus of the location related data to be built by the location system. percentile: percentage of a set of observations of a parameter which give a successful result (i.e. success rate) performance feature: set of performance requirements for a given location