ETSI TS 102 932-2-2011 Railway Telecommunications (RT) ER-GSM frequencies Part 2 ER-GSM additional radio conformance testing (V1 1 1)《铁路通信(RT) ER-GSM频率 第2部分 ER-GSM附加无线电一致性测试(版本1 1 .pdf

《ETSI TS 102 932-2-2011 Railway Telecommunications (RT) ER-GSM frequencies Part 2 ER-GSM additional radio conformance testing (V1 1 1)《铁路通信(RT) ER-GSM频率 第2部分 ER-GSM附加无线电一致性测试(版本1 1 .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 932-2-2011 Railway Telecommunications (RT) ER-GSM frequencies Part 2 ER-GSM additional radio conformance testing (V1 1 1)《铁路通信(RT) ER-GSM频率 第2部分 ER-GSM附加无线电一致性测试(版本1 1 .pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 932-2 V1.1.1 (2011-11) Railway Telecommunications (RT); ER-GSM frequencies; Part 2: ER-GSM additional radio conformance testing Technical Specification ETSI ETSI TS 102 932-2 V1.1.1 (2011-11)2Reference DTS/RT-EGSM-R-001-2 Keywords ER-GSM, R-GSM, radio, testing ETSI 650 Route des Luciole

2、s F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/w

3、ww.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the print

4、ing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/p

5、ortal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and th

6、e foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2011. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered fo

7、r the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 932-2 V1.1.1 (2011-11)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references .

8、 5g32.2 Informative references 6g33 Abbreviations . 6g34 General test conditions . 6g34.1 Base Station System (BSS) 7g34.1.1 Transmitter 7g34.1.2 Receivers 7g34.2 Mobile Station (MS) . 7g34.2.1 Transmitter 7g34.2.2 Receivers 8g34.3 Repeaters 8g34.3.1 Transmitter 8g34.3.2 Receivers 8g35 Other require

9、ments . 8g3Annex A (informative): Bibliography . 9g3History 10g3ETSI ETSI TS 102 932-2 V1.1.1 (2011-11)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly

10、 available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

11、 server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may be

12、come, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Railway Telecommunications (RT). The present document is part 2 of a multi-part deliverable covering the Railway Telecommunications; specifying the extended GSM-R frequen

13、cies, as identified below: Part 1: “ER-GSM additional radio aspects“; Part 2: “ER-GSM additional radio conformance testing“. ETSI ETSI TS 102 932-2 V1.1.1 (2011-11)51 Scope The present document describes the technical characteristics and methods of testing the improved receiver performance for profe

14、ssional mobile stations (professional MS), base stations (BS) and repeaters for the Pan European digital cellular communications system and Personal Communication Systems (PCS) operating in the 900 MHz band (GSM 900), standardized by ETSI Special Mobile Group (SMG). The present document is valid for

15、 equipment implemented according Phase2+ R99 onwards. The present document covers the conformance testing of radio equipment supporting the extended frequency range ER-GSM. Equipment not supporting the extended frequency range ER-GSM is not covered in this document. It does not necessarily include a

16、ll the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. It should be noted that a receiver with improved parameters is specified in TS 102 933-1 7 The present document is part of the GSM-series of technical specifica

17、tions. The present document neither replaces any of the other GSM technical specifications or GSM related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the GSM 900 system. The present document lists the additional test procedures for testing the extended frequency ban

18、d for ER-GSM. For a full description of the system, reference should be made to all the GSM technical specifications or GSM related ETSs or ENs. Clause 2 provides a complete list of the GSM technical specifications, GSM related ETSs, ENs and ETRs, on which this conformance test specifications is bas

19、ed. Equipment operating at the edge of the transmit and receive band might be subject to regulatory restrictions in some geographical regions. In areas where systems coexist the received interference power might have to be limited. Coexistence scenarios have been investigated in ECC Report 162 i.2 p

20、roviding also recommendations for the application of mitigation techniques. The present document applies to the unit which includes the hardware to establish a connection across the radio interface. 2 References References are either specific (identified by date of publication and/or edition number

21、or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might

22、be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document.

23、 1 ETSI TS 100 607-1: “Digital cellular telecommunications system (Phase 2+); Mobile Station (MS) conformance specification; Part 1: Conformance specification (3GPP 11.10-1 Release 1999)“. 2 ETSI TS 100 910: “Digital cellular telecommunications system (Phase 2+); Radio transmission and reception (3G

24、PP TS 05.05 Release 1999)“. 3 ETSI TS 101 087: “Digital cellular telecommunications system (Phase 2 and Phase 2+); Base Station System (BSS) equipment specification; Radio aspects (3GPP TS 11.21 Release 1999)“. 4 ETSI TS 102 933-2: “Railway Telecommunications; GSM-R improved receiver parameters; Par

25、t 2: Radio conformance testing“. ETSI ETSI TS 102 932-2 V1.1.1 (2011-11)65 ETSI TS 102 932-1: “Railway Telecommunications; ER-GSM frequencies; Part 1: ER-GSM additional radio aspects“. 6 ETSI TS 151 026: “Digital cellular telecommunications system (Phase 2+); Base Station System (BSS) equipment spec

26、ification; Part 4: Repeaters (3GPP TS 51.026 version 10.0.0 Release 10)“. 7 ETSI TS 102 933-1: “Railway Telecommunications; GSM-R improved receiver parameters; Part 1: Requirements for radio reception“. 2.2 Informative references The following referenced documents are not necessary for the applicati

27、on of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TR 101 748: “Digital cellular telecommunications system (Phase 2+) (GSM); Abbreviations and acronyms (GSM 01.04 version 8.0.0 Release 1999)“. i.2 ECC Report 162: “Practical Mechanism to improve the

28、 Compatibility between GSM-R and Public Mobile Networks and Guidance on Practical Coordination“. 3 Abbreviations For the purposes of the present document, the abbreviations given in TR 101 748 i.1 apply. 4 General test conditions The relevant MS, BTS and repeaters transmit bands for the present docu

29、ment are the MS and BTS transmit bands as defined in TS 100 910 2 and TS 102 932-1 5. The manufacturer shall declare: - which of the frequency bands defined in TS 102 933-2 4 are supported by the BSS and the MS. This frequency range comprises the transmit and receive operating bands. Many tests in t

30、he present document are performed with appropriate frequencies in the bottom, middle and top of the operating frequency band of the BTS and MS. These are denoted as RF channels B (bottom), M (middle) and T (top). Table 1: ARFCN Term Band Low ARFCN range Mid ARFCN range High ARFCN range E-GSM 900 975

31、 to 980 60 to 65 120 to 124 R-GSM 900 955 to 960 (R-GSM) and 975 to 980 (E-GSM) 60 to 65 120 to 124 ER-GSM 900 940 to 945 (ER-GSM) 975 to 980 (E-GSM) 60 to 65 120 to 124 When a test is performed by a test laboratory, the ARFCNs to be used for RF channels B, M and T shall be specified by the laborato

32、ry. The laboratory may consult with operators, the manufacturer or other bodies. When a test is performed by a manufacturer, the ARFCNs to be used for RF channels B, M and T may be specified by an operator. The channel numbering and the channel allocation can be calculated from tables 1 and 2. ETSI

33、ETSI TS 102 932-2 V1.1.1 (2011-11)7Table 2: Channel Numbering: Frequencies are in MHz E-GSM900 Fl(n)=890+0,2*n FI(n)=890+0,2*(n-1 024) 0n124 975=n=1 023 Fu(n)=Fl(n)+45 R-GSM900 Fl(n)=890+0,2*n FI(n)=890+0,2*(n-1 024) 0n124 955=n=1 023 Fu(n)=Fl(n)+45 ER-GSM900 Fl(n)=890+0,2*n FI(n)=890+0,2*(n-1 024)

34、0n124 940n1 023 Fu(n)=Fl(n)+45 If not otherwise stated in this document the test procedures and limits of the underlying standard for BSS and MS conformance testing are valid. 4.1 Base Station System (BSS) The frequency bands for the Base Station System are given in table 3. Table 3: Frequency bands

35、 for ER-GSM Base Station Systems TX: RX: E-GSM900 925 MHz to 960 MHz 880 MHz to 915 MHz R-GSM900 921 MHz to 960 MHz 876 MHz to 915 MHz ER-GSM900 918 MHz to 960 MHz 873 MHz to 915 MHz NOTE 1: It is up to the operator to choose any subset of these bands (or the complete band) on a location basis withi

36、n a frequency band assigned to the operator by the authority responsible for frequency management issues. NOTE 2: The BTS may cover a complete band, or the BTS capabilities may be restricted to a subset only, depending on the operators needs. 4.1.1 Transmitter Transmitter characteristics shall be th

37、e same as specified in TS 101 087 3 with the exceptions that the requirements are applicable to the entire ER-GSM band. 4.1.2 Receivers Receiver characteristics shall be the same as specified in TS 101 087 3 with the exceptions that the requirements are applicable to the entire ER-GSM band. 4.2 Mobi

38、le Station (MS) The frequency bands for the Mobile Stations are given in table 4. Table 4: Frequency bands for ER-GSM Mobile Station TX: RX: E-GSM900 880 MHz to 915 MHz 925 MHz to 960 MHz R-GSM900 876 MHz to 915 MHz 921 MHz to 960 MHz ER-GSM900 873 MHz to 915 MHz 918 MHz to 960 MHz 4.2.1 Transmitter

39、 Transmitter characteristics shall be the same as specified in TS 100 607-1 1 with the exceptions that the requirements are applicable to the entire ER-GSM band. ETSI ETSI TS 102 932-2 V1.1.1 (2011-11)84.2.2 Receivers Receiver characteristics shall be the same as specified in TS 100 607-1 1 and TS 1

40、02 933-2 4 with the exceptions that the requirements are applicable to the entire ER-GSM band. 4.3 Repeaters A repeater, as a bi-directional amplifier, can amplify and transmit a received MS signal in the MS transmit band, simultaneously it can amplify and transmit a received BTS signal in the BTS t

41、ransmit band. NOTE: In some circumstances, for instance when an operator (or more than one operator who co-ordinate the use of repeaters), is not allocated a complete band, it may be necessary to restrict the frequency range of operations of repeaters. In these circumstances, the test of “Gain outsi

42、de operating band“ may be used to verify the performance of the repeater. 4.3.1 Transmitter Transmitter characteristics shall be the same as specified in TS 151 026 6 with the exceptions that the requirements are applicable to the entire ER-GSM band. 4.3.2 Receivers Receiver characteristics shall be

43、 the same as specified in TS 151 026 9 with the exceptions that the requirements are applicable to the entire ER-GSM Band. 5 Other requirements Equipment supporting the extended band shall also fulfill the requirements for equipment operating in the current R-GSM band to guarantee the compatibility

44、between the equipment. Test cases which are not explicitly described in the present document shall be taken from the corresponding standards. ETSI ETSI TS 102 932-2 V1.1.1 (2011-11)9Annex A (informative): Bibliography ETSI TS 102 933-1: “Railway Telecommunications; GSM-R improved receiver parameters

45、 Part 1: Requirements for radio reception“. ETSI EN 300 609-4: “Global System for Mobile communications (GSM); Part 4: Harmonized EN for GSM Repeaters covering the essential requirements of article 3.2 of the R Types of Mobile Stations (MS) (GSM 02.06)“. ETSI TS 102 281: “Railways Telecommunications (RT); Global System for Mobile communications (GSM); Detailed requirements for GSM operation on Railways“. ETSI ETSI TS 102 932-2 V1.1.1 (2011-11)10History Document history V1.1.1 November 2011 Publication