ETSI TS 102 364-1-2004 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) ISDN PSTN Network Integration Testing for H 323 based trunk.pdf

《ETSI TS 102 364-1-2004 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) ISDN PSTN Network Integration Testing for H 323 based trunk.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 364-1-2004 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) ISDN PSTN Network Integration Testing for H 323 based trunk.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 364-1 V1.1.1 (2004-11)Technical Specification Telecommunications and Internet converged Services andProtocols for Advanced Networking (TISPAN);ISDN/PSTN Network Integration Testingfor H.323 based trunking;Part 1: Test Suite Structure andTest Purposes (TSS Essential, or potentially Essen

2、tial, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI.

3、No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Telec

4、ommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). The present document is part 1 of a multi-part deliverable covering the Network Integration Testing between H.323, ISDN and PSTN, as identified below: Part 1: “Test Suite Structure and Test Purposes (TSS Pa

5、rt 2: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. Introduction The present document contains the Test Suite Structure and Test Purposes (TSS Technology Mapping; Implementation of TIPHON architecture using H.323“. 2 ITU

6、-T Recommendation H.323: “Packet-based multimedia communications systems“. 3 ITU-T Recommendation H.225.0: “Call signalling protocols and media stream packetization for packet-based multimedia communication systems“. 4 ITU-T Recommendation Q.931: “ISDN user-network interface layer 3 specification fo

7、r basic call control“. 5 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 6 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part

8、 2: Abstract Test Suite specification“. ETSI ETSI TS 102 364-1 V1.1.1 (2004-11) 6 7 ISO/IEC 9646-3: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)“. 8 ITU-T Recommendation H.246 Annex C: “

9、Annex C: ISDN User Part function - H.225.0 interworking“. 9 ETSI EN 300 403-1: “Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1: Protocol specification ITU-T Recommendation

10、Q.931 (1993), modified“. 10 ETSI EN 300 092-1: “Integrated Services Digital Network (ISDN); Calling Line Identification Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification“. 11 ETSI EN 300 093-1: “Integrated Services

11、 Digital Network (ISDN); Calling Line Identification Restriction (CLIR) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification“. 12 ETSI EN 300 097-1: “Integrated Services Digital Network (ISDN); Connected Line Identification Presentation

12、(COLP) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification“. 13 ETSI EN 300 098-1: “Integrated Services Digital Network (ISDN); Connected Line Identification Restriction (COLR) supplementary service; Digital Subscriber Signalling System

13、 No. one (DSS1) protocol; Part 1: Protocol specification“. 14 ITU-T Recommendation Q.699: “Interworking between ISDN access and non-ISDN access over ISDN User Part of Signalling System No. 7“. 15 ETSI EN 300 899-3: “Integrated Services Digital Network (ISDN); Signalling System No.7; Interworking bet

14、ween ISDN User Part (ISUP) version 2 and Digital Subscriber Signalling System No. one (DSS1); Part 3: Test Suite Structure and Test Purposes (TSS Diversion supplementary services; Digital Subscriber Signalling System No. One (DSS1); Part 1: Protocol specification“. 17 ETSI EN 300 188-1: “ Integrated

15、 Services Digital Network (ISDN); Three-Party (3PTY) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification“. 18 ETSI EN 300 141-1: “Integrated Services Digital Network (ISDN); Call Hold (HOLD) supplementary service; Digital Subscriber Sig

16、nalling System No. one (DSS1) protocol; Part 1: Protocol specification“. 19 ETSI EN 300 058-1: “Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification“. 20 ETSI EN 300 138-1: “I

17、ntegrated Services Digital Network (ISDN); Closed User Group (CUG) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification“. 21 ITU-T Recommendation Q.764: “Signalling System No. 7 - ISDN User Part signalling procedures“. 22 ETSI EN 300 001

18、: “Attachments to the Public Switched Telephone Network (PSTN); General technical requirements for equipment connected to an analogue subscriber interface in the PSTN“. 23 ETSI ETS 300 648: “Public Switched Telephone Network (PSTN); Calling Line Identification Presentation (CLIP) supplementary servi

19、ce; Service description“. 24 ETSI EN 300 659 (all parts): “Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related) services“. ETSI ETSI TS 102 364-1 V1.1.1 (2004-11) 7 25 ETSI EN 300 196-1: “In

20、tegrated Services Digital Network (ISDN); Generic functional protocol for the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, th

21、e terms and definitions given in ITU-T Recommendation H.323 2, ITU-T Recommendation H.225.0 3, ISO/IEC 9646 parts 1 5 to 3 7 and the following apply: Basic Call Control (BCC): signalling protocol associated with the DSS1 - ISDN Basic Call control procedures of ITU-T Recommendation Q.931 (EN 300 403-

22、1) inopportune: specifies a test purpose covering a signalling procedure where an inopportune message (type of message not expected in the IUT current state) is sent to the IUT syntactically invalid: specifies a test purpose covering a signalling procedure where a valid (expected in the current stat

23、us of the IUT) but not correctly encoded (unknown or incorrect parameter values) message is sent to the IUT, which shall react correctly and eventually reject the message test purpose: non-formal test description, mainly using text. This test description can be used as the basis for a formal test sp

24、ecification (e.g. Abstract Test Suite in TTCN). See ISO/IEC 9646. valid: specifies a test purpose covering a signalling procedure where all the messages sent to or received from the IUT are valid (expected in the current status of the IUT) and correctly encoded 3.2 Abbreviations For the purposes of

25、the present document, the following abbreviations apply: BCC Basic Call Control BI network beyond interworking point I Inopportune IUT Implementation Under Test LN public network serving the local user LPN private network serving the local user PIXIT Protocol Implementation eXtra Information for Tes

26、ting RLN public network serving the remote user RPN private network serving the remote user S Syntactically invalidTP Test Purpose TSS Test Suite Structure V Valid ETSI ETSI TS 102 364-1 V1.1.1 (2004-11) 8 4 Test Suite Structure (TSS) 4.1 ISDN-H.323-ISDN ISDN-ISDN Basic_Call (1) Successful (1) Speec

27、h IHI_SP_xx Audio IHI_AU_xxUDI IHI_UD_xxUnsuccessful (2) IHI_xx_Uxx Supplementary Services (2) CLIP IHI_xxSSCLIPxx CLIR IHI_xxSSCLIRxxCOLP IHI_xxSSCOLPxxCOLR IHI_xxSSCOLRxx DDI IHI_xxSSDDIxx CFU IHII_xxSSCFUxx CFB IHII_xxSSCFBxx CFNR IHII_xxSSCFNRxx 3PTY IHII_xxSS3PTYxxCH IHI_xxSSCHxx CW IHI_xxSSCWx

28、x CUG IHI_xxSSCUGxx 4.2 ISDN- H.323-PSTN ISDN-PSTN Basic_Call (4) Successful (1) Speech IHP_SP_xx Audio IHP_AU_xxUnsuccessful (2) IHP_xx_Uxx Supplementary Services (5) CLIP IHP_xxSSCLIPxx CLIR IHP_xxSSCLIRxxCOLP IHP_xxSSCOLPxxCOLR IHP_xxSSCOLRxx CUG IHP_xxSSCUGxx 4.3 PSTN-H.323-ISDN PSTN-ISDN Basic_

29、Call (6) Successful (1) PHI_AU_xx Unsuccessful (2) PHI_AU_UxxSupplementary Services (7) CLIP PHI_AUSSCLIPxx CLIR PHI_AUSSCLIRxxDDI PHI_AUSSDDIxx CUG PHI_AUSSCUGxx ETSI ETSI TS 102 364-1 V1.1.1 (2004-11) 9 5 Numbering Scheme Pos 1: Network of the A-Subscriber Pos. 2: Network of the B-Subscriber Pos.

30、3: Network of the C-Subscriber Pos. 4: Network of the D-Subscriber Pos. 5: Network of the E-Subscriber The following Network Codes apply: _:No such network used (used e.g. for C-Subscriber in successful A to B Calls) (underscore makes it easier to read the name) P: PSTN I: ISDN H: H.323 Pos. 6 and 7

31、: Bearer- or Teleservice involved xx: defined per PIXIT value SP: Speech AU: 3,1 kHz Audio UD: UDI Pos. 8 ISDN - Pointto-Point Test purpose: Verify that the progress indicator information with the progress description #2 “destination address is non-ISDN“ in the ISDN-CONNECT message can be transporte

32、d correctly to the calling user. Parameter values: A:! SETUP: BC = speech, HLC = telephony A:? CONNECT: progress indicator #1 Call is not end-to-end ISDN progress indicator #2 “destination address is non-ISDN“ B:? SETUP: BC = speech, B:! CONNECT: progress indicator #2 “destination address is non-ISD

33、N“. Comments: If the network does not support the transport of two PI, the second PI will be sent in a separate PROGRESS message. 6.1.2 Successful - Audio Successful 3,1 kHz audio IHI_AU_01 ISDN ref. to: EN 300 403-1 9 clause 5.1.5.1 PBN ref. to: H.225.0 3 clauses 7.2.2.1, 7.3.10 and 7.3.2 TS 101 88

34、3 1 clauses 5.1, B.1.3.8 and B.1.3.2 H.246 Annex C 8 clauses C.7.1 and C.6.1 TSS reference: ISDN-H.323-ISDN/Basic_call/Successful/Audio Selection criteria: Test purpose: Ensure that call establishment using en-bloc sending is performed correctly. The first backward message after the CALL PROCEEEDING

35、 shall include the PI # 1. The ALERTING message shall include the PI # 8. Ensure that during call establishment a Progress indicator information element shall be included in the SETUP message to the called user with progress description value # 1 “Call is not end-to-end ISDN“ and optional # 3 origin

36、ation address is “non-ISDN“. Ensure that in the call delivered state (N4) the transfer of tone or announcement on the B- channel is performed correctly. Ensure that in the active call state (N10) the voice transfer on the B-channels is performed correctly (e.g. testing QoS parameters). Parameter val

37、ues: BC = 3,1 kHz audio, no HLC Comments: ETSI ETSI TS 102 364-1 V1.1.1 (2004-11) 13IHI_AU_02 ISDN ref. to: EN 300 403-1 9 clause 5.1.5.2 PBN ref. to: H.225.0 3 clauses 7.2.2.1, 7.3.10 and 7.3.2 TS 101 883 1 clauses 5.1, B.1.3.8 and B.1.3.2 H.246 Annex C 8 clauses C.7.1 and C.6.1 TSS reference: ISDN

38、-H.323-ISDN/Basic_call/Successful/Audio Selection criteria: Test purpose: Ensure that call establishment using overlap sending is performed correctly. The first backward message after the SETUP ACKNOWLEDGE shall include the PI # 1. The ALERTING message shall include the PI # 8. Ensure that during ca

39、ll establishment a Progress indicator information element shall be included in the SETUP message to the called user with progress description value # 1 “Call is not end-to-end ISDN“ and optional # 3 origination address is “non-ISDN“. Ensure that in the call delivered state (N4) the transfer of tone

40、or announcement on the B- channel is performed correctly. Ensure that in the active call state (N10) the voice transfer on the B-channels is performed correctly (e.g. testing QoS parameters). Parameter values: BC = 3,1 kHz audio, no HLC Comments: IHI_AU_03 ISDN ref. to: EN 300 403-1 9 clause 5.3.3 P

41、BN ref. to: H.225.0 3 clauses 7.2.2.1, 7.3.10 and 7.3.2 TS 101 883 1 clauses 5.1, B.1.3.8 and B.1.3.2 H.246 Annex C 8 clauses C.7.1 and C.6.1 TSS reference: ISDN-H.323-ISDN/Basic_call/Successful/Audio Selection criteria: Test purpose: Ensure that the call clearing procedure is performed correctly wh

42、en the calling user clears after answer. The network transports the cause value #16 and the location user to the called user. Parameter values: BC = 3,1 kHz audio, no HLC Comments: IHI_AU_04 ISDN ref. to: EN 300 403-1 9 clause 5.3.3 PBN ref. to: H.225.0 3 clauses 7.2.2.1, 7.3.10 and 7.3.2 TS 101 883

43、 1 clauses 5.1, B.1.3.8 and B.1.3.2 H.246 Annex C 8 clauses C.7.1 and C.6.1 TSS reference: ISDN-H.323-ISDN/Basic_call/Successful/Audio Selection criteria: Test purpose: Ensure that the call clearing procedure is performed correctly when the called user clears after answer. The network transports the

44、 cause value #16 and the location user to the calling user. Parameter values: BC = 3,1 kHz audio, no HLC Comments: IHI_AU_05 ISDN ref. to: EN 300 403-1 9 clause 4.5.16 PBN ref. to: H.225.0 3 clauses 7.2.2.1, 7.3.10 and 7.3.2 TS 101 883 1 clauses 5.1, B.1.3.8 and B.1.3.2 H.246 Annex C 8 clauses C.7.1

45、 and C.6.1 TSS reference: ISDN-H.323-ISDN/Basic_call/Successful/Audio Selection criteria: Telefax G2/G3 terminals Test purpose: Support of Telefax G2/G3: Ensure that the BC = 3,1 kHz audio but without the HLC information is transported transparently through the network and correctly delivered to the

46、 called user. Ensure that in the call delivered state (N4) the transfer of tone or announcement on the B- channel is performed correctly. Ensure that in the active call state (N10) the data transfer on the B-channels is performed correctly (e.g. testing QoS parameters). Parameter values: A: ! BC = 3

47、,1 kHz audio, HLC = facsimile group 2/3 B: ! BC = 3,1 kHz audio, Comments: ETSI ETSI TS 102 364-1 V1.1.1 (2004-11) 14IHI_AU_06 ISDN ref. to: EN 300 403-1 9 clause 5.1.6 PBN ref. to: H.225.0 3 clauses 7.2.2.1, 7.3.10 and 7.3.2 TS 101 883 1 clauses 5.1, B.1.3.8 and B.1.3.2 H.246 Annex C 8 clauses C.7.

48、1 and C.6.1 TSS reference: ISDN-H.323-ISDN/Basic_call/Successful/Audio Selection criteria: point-to-point Test purpose: Verify that the progress indicator information with the progress description #2 “destination address is non-ISDN“ in the CALL PROCEEDING message can be transported correctly to the

49、 calling user. Ensure that in the call delivered state (N4) the transfer of tone or announcement on the B- channel is performed correctly. Ensure that in the active call state (N10) the data transfer on the B-channels is performed correctly (e.g. testing QoS parameters). Parameter values: A:! SETUP: BC = 3,1 kHz audio A: ? CALL PROCEEDING: progress indicator #2 “destination address is non-ISDN“ EN 300 899-3 15 Annex A PBN ref. to: H.225.0 3 cl