ETSI ES 201 986-2003 Services and Protocols for Advanced NetworkS (SPAN) Short Message Service (SMS) for PSTN ISDN Service description (V1 2 1)《高级网络(SPAN)的业务和协议 PSTN ISDN用短消息业务(SMS.pdf

《ETSI ES 201 986-2003 Services and Protocols for Advanced NetworkS (SPAN) Short Message Service (SMS) for PSTN ISDN Service description (V1 2 1)《高级网络(SPAN)的业务和协议 PSTN ISDN用短消息业务(SMS.pdf》由会员分享，可在线阅读，更多相关《ETSI ES 201 986-2003 Services and Protocols for Advanced NetworkS (SPAN) Short Message Service (SMS) for PSTN ISDN Service description (V1 2 1)《高级网络(SPAN)的业务和协议 PSTN ISDN用短消息业务(SMS.pdf（39页珍藏版）》请在麦多课文档分享上搜索。

1、ETSI ES 201 986 1.2.1 (2003-04) ETSI Standard Services and Protocols for Advanced Networks (SPAN); Short Message Service (SMS) for PSTNIISDN; Service description 2 ETSI ES 201 986 VI .2.1 (2003-04) Reference RESEPAN-1 1 O1 O9 Keywords ISDN, PSTN, stage 1, SMS, supplementary service ETSI 650 Route de

2、s Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded fr

3、om: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall

4、be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is availabl

5、e at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.

6、O European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Tra

7、de Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI ES 201 986 VI . 2.1 (2003-04) Content Intellectual Property Rights 6 Foreword . 6 Introduction 6 1 2 3 3.1 3.2 4 4.1 4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 4.1.6 4.1.7 4.1.8 4.1.9 4.2 4.2.1 4.2.2 4.

8、2.3 4.2.4 4.2.5 4.2.6 4.3 4.3.1 4.3.2 4.3.3 4.3.4 4.3.5 4.3.6 4.3.7 5 5.1 5.2 5.2.1 Scope 7 References 8 Definitions and abbreviations . 8 Definitions 8 Abbreviations 9 Description . 10 Core service features 11 Short Message Service Centre (SM-SC) capabilities 11 Outgoing message (from the originati

9、ng SM-TE) 11 Submit report 12 Incoming message (to the destination SM-TE) . 12 Deliver report 13 Message length . 13 Character set . 14 Terminal memory . 14 Optional service features 14 Reply path . 14 Validity period 15 Encryption or protection . 15 Destination media 15 Replace short message functi

10、on 15 Anonymous Short Message 16 Other features 16 16 SM Forwarding (SMF) 16 Anonymous SM Reject 16 Malicious SM IDentification 17 Outgoing SM White List/Black List (OSMWL/OSMBL) 17 Incoming SM White List/Black List (ISMWLASMBL) 17 SM Distribution List (SMDL) (Multi Messaging) 17 Service Centre Time

11、 Stamp 14 Procedures 18 5.2.1.1 5.2.1.2 5.2.2 5.2.2.1 5.2.2.2 5.2.3 5.2.3.1 5.2.3.1.1 5.2.3.1.2 5.2.3.2 5.2.3.2.1 5.2.3.2.2 5.2.3.3 5.2.3.3.1 5.2.3.3.2 Provision and withdrawal . 18 Normal procedures . 19 Registration and erasure 19 Core requirements . 19 Optional requirements . 19 Activation and de

12、activation 19 Core requirements . 19 Optional requirements . 20 Invocation and operation 20 Outgoing message 20 Core requirements 20 Core requirements 21 Optional requirements 21 Incoming message 22 Core requirements 22 Optional requirements 22 21 21 ETSI 4 ETSI ES 201 986 VI . 2.1 (2003-04) 5.2.3.4

13、 5.2.3.4.1 5.2.3.4.2 5.2.3.5 5.2.3.5.1 5.2.3.5.2 5.2.4 5.2.4.1 5.2.4.2 5.3 5.3.1 5.3.2 5.3.3 5.3.3.1 5.3.3.1.1 5.3.3.1.2 5.3.3.1.3 5.3.3.1.4 5.3.3.2 5.3.4 Deliver report 23 Core requirements . 23 Optional requirements . 23 Status report 23 Core requirements . 23 Optional requirements . 24 Interrogat

14、ion . 24 Core requirements . 24 Optional requirements . 24 Exceptional procedures 25 Registration and erasure 25 Activation and deactivation 25 Invocation and operation 25 25 25 26 Incoming message 26 27 27 27 6 Interworking requirements . 27 6.1 Intenvorking between the SMS service providers equipm

15、ent and other networks 27 6.2 Intenvorking between public networks providing the transfer of short messages between the Service Centre and the terminal 27 6.3 Intenvorking with private networks . 28 6.4 Intenvorking with other types of services 28 7 Interaction with supplementary services 28 Annex A

16、 (normative): Interaction with ISDN supplementary services 29 A . 1 Advice Of Charge services (A0C.S. A0C.D. AOC-E) 29 A.2 Call Waiting (CW) . 29 A.3 Call HOLD (HOLD) 29 A.4 Explicit Call Transfer (ECT) 29 A.5 Calling Line Identification Presentation (CLIP) 29 A.6 Calling Line Identification Restric

17、tion (CLIR) 30 A.7 Connected Line identification Presentation (COLP) . 30 A.8 Connected Line identification Restriction (COLR) . 30 A.9 Closed User Group (CUG) . 30 A . 10 Completion of Calls to Busy Subscriber (CCBS) 30 A . 11 Completion of Calls on No Reply (CCNR) 30 A . 12 CONFerence call, add-on

18、 (CONF) . 30 A . 13 Call Forwarding Unconditional (CFU) 31 A . 14 Call Forwarding Busy (CFB) . 31 A . 15 Call Forwarding No Reply (CFNR) . 31 A . 16 Call Deflection (CD) 31 A . 17 Selective Call Forwarding (SCF) . 31 A . 18 Malicious Call IDentification (MCID) . 31 A . 19 Three ParTY (3PTY) 31 ETSI

19、5 ETSI ES 201 986 VI . 2.1 (2003-04) A.20 User-to-User Signalling (US) 31 A.2 1 Fixed Outgoing Call Barring (OCB-F) 31 A.22 User Controlled Outgoing Call Barring (OCB-UC) . 32 A.23 Message Waiting Indication (MWI) . 32 A.24 Meet-Me Conference (MMC) 32 A.25 Direct Dialling In (DDI) . 32 A.26 Multiple

20、 Subscriber Number (MSN) 32 A.27 SUB addressing (SUB) . 32 A.28 Terminal Portability (TP) . 32 A.29 Line Hunting (LH) . 32 A.30 Anonymous Call Rejection (ACR) . 32 Annex B (normative): Interaction with PSTN supplementary services 33 B . 1 Calling Line Identification Presentation (CLIP) 33 B.2 Callin

21、g Line Identification Restriction (CLIR) 33 Annex C (informative): Interaction with PSTN supplementary services 34 C . 1 Advice Of Charge services (AOC-S, AOC-D, AOC-E) 34 C.2 Call Waiting (CW) . 34 C.3 C.4 Completion of Calls to Busy Subscriber (CCBS) 34 C.5 Completion of Calls on No Reply (CCNR) 3

22、4 C.6 Call Forwarding Unconditional (CFU) 35 C.7 Call Forwarding Busy (CFB) . 35 C.8 Call Forwarding No Reply (CFNR) . 35 C.9 Selective Call Forwarding (SCF) . 35 C . 10 Malicious Call IDentification (MCID) . 35 C . 11 Three ParTY (3PTY) 35 C.12 Fixed Outgoing Call Barring (OCB-F) 35 C . 13 User Con

23、trolled Outgoing Call Barring (OCB-UC) . 35 C . 14 Message Waiting Indication (MWI) . 36 C . 15 Multiple Subscriber Number (MSN) 36 C . 16 SUB addressing (SUB) . 36 C . 17 Anonymous Call Rejection (ACR) . 36 Annex D (informative): Call HOLD (HOLD) 34 Definition of registration, erasure, activation,

24、deactivation, invocation and interrogation procedures for a network based solution 37 Annex E (informative): Bibliography . 38 History 39 ETSI 6 ETSI ES 201 986 VI .2.1 (2003-04) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ET

25、SI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 3 14: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which is availab

26、le from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This ETSI Standard (ES) has been produced by ETSI Technical Committee Services and Pr

27、otocols for Advanced Networks (SPAN). In accordance with ITU-T Recommendation I. 130 11 the following three level structure is used to describe the supplementary telecommunication services as provided by European public telecommunications operators under the pan-European Integrated Services Digital

28、Network (ISDN): Stage 1: is an overall service description, from the users stand-point; Stage 2: identifies the functional capabilities and information flows needed to support the service described in stage 1; and Stage 3: defines the signalling system protocols and switching functions needed to imp

29、lement the service described in stage 1. The present document details the stage 1 aspects (overall service description) for the Short Message Service (SMS). I n t rod uct ion The Short Message Service (SMS) is a service that shall make it possible to offer seamless SMS over different networks (PSTN,

30、 ISDN, PLMN). In the following of the present document it is assumed that both the sending and receiving Terminal Equipment (TE) have appropriate capabilities to send, receive, store, display and delete short messages. ETSI 7 ETSI ES 201 986 VI .2.1 (2003-04) 1 Scope The present document defines the

31、 stage 1 service description of the Short Message Service (SMS). Stage 1 is an overall service description, primarily from the service subscribers and users point of view, but does not deal with the details of the human interface itself. The SMS can be provided via ISDN and PSTN accesses. The presen

32、t document includes information applicable to service providers and equipment manufacturers. Where the text indicates the status of a requirement, (i.e. as strict command or prohibition, as authorization leaving freedom or, as a capability or possibility), this shall be reflected in the text of the

33、relevant stage two and stage three standards. The present document describes only the short message service between Terminal Equipment (TE) and a Short Message Service Centre (SM-SC). The kind of protocols for sending and receiving a Short Message (SM) as well as charging principles are outside the

34、scope of the present document. Interactions with supplementary services not mentioned in clause 7 and the respective annexes are outside the scope of the present document. The present document contains the core service features and also optional service features for the Short Message Service. A serv

35、ice may be provided on the basis of the core requirements alone. The present document does not deal with a Short Message Service Broadcast. Furthermore, additional functionalities not covered in the present document may be implemented. The requirements of which are considered outside of the scope of

36、 the present document are consequently outside the scope of the corresponding stage 2 and stage 3 standards. Such additional functionalities may be on a network-wide basis, or particular to one user or a group of users. Such additional functionalities do not compromise conformance to the core requir

37、ements of the service. Furthermore, conformance to the present document is met by conforming to the stage three standards with the field of application appropriate to the equipment being implemented. Therefore no method of testing is provided for the present document. The SMS can be realized in two

38、ways, either as a network based solution or as a user based solution using the basic call procedures only. The sending andor receiving part can be preceded in the same or in a different way. 1) 2) Network Based Solution: a service offered as part of a function within the public network. User Based S

39、olution: a service offered as part of a function within the end-user equipment, which does not require any specific short message transfer function inside the public network. The present document covers in general both possibilities but if different or specific descriptions are necessary, the releva

40、nt clauses are marked as “NBS“ (Network Based Solution) or “UBS“ (User Based Solution). Clauses that are valid for both realizations are marked as “UBS/NBS“. There are two different protocols known for the UBS (protocol 1 and protocol 2; see ES 201 912 3) and a third one for NBS. The handling betwee

41、n terminals with different protocols on the same subscriber line and service centres should be managed within the service centres or the terminals. These handling matters are outside the scope of the present document. ETSI 8 ETSI ES 201 986 VI .2.1 (2003-04) 2 Re fe re nces The following documents c

42、ontain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication andor edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply For a non-spe

43、cific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at p. il ITU-T Recommendation I. 130: “Method for the characterization of telecommunication services supported by an ISDN and network capabilities of

44、 an ISDN“. 21 Void. 31 ETSI ES 201 912: “Access and Terminals (AT); Short Message Service (SMS) for PSTN/ISDN; Short Message Communication between a fixed network Short Message Terminal Equipment and a Short Message Service Centre“. ETSI ETS 300 345: “Integrated Services Digital Network (ISDN); Inte

45、rworking between public ISDNs and private ISDNs for the provision of telecommunication services; General aspects“. 41 3 3.1 Definitions and abbreviations De fi nit ions For the purposes of the present document, the following terms and definitions apply: deliver report: response from the destination

46、terminal to the SM-SC indicating that an SM has been accepted or not with the appropriate cause, if rejected destination SM-TE: terminal with short message fnctionalities on the receiving users side, connected to the subscriber line which receives an incoming message originating SM-TE: terminal with

47、 short message fnctionalities on the sending users side, connected to the subscriber line which initiates an outgoing message receiving user: user who receives an incoming message on hidher SM-TE from the SM-SC via the subscriber line replace Short Message Function: optional function of the SM-SC an

48、d the SM-TE that enables the automatic replacing of a Short Message by a new one NOTE: The replacement indication is transmitted in conjunction with the Short Message. See Replace Short Message Type. replace short message type: indication to be sent with a short message (in both submission and deliv

49、ery cases) that the short message is of a particular type allowing the destination SM-TE or SM-SC to replace an existing message of the same type held in the SM-TE or SM-SC provided it comes: in SM delivery cases: from the same SM-SC and originating address; in SM submission cases: from the same SM-TE. ETSI 9 ETSI ES 201 986 VI .2.1 (2003-04) reply path procedure: mechanism which allows an SM-TE to request that an SM-SC should be permitted to handle a reply sent in response to a message previously sent from that SM-TE to another SM-TE NOTE: This may happen even though