ETSI EN 302 064-2016 Wireless Video Links operating in the 1 3 GHz to 50 GHz frequency band Harmonised Standard covering the essential requirements of article 3 2 of Directive 2014.pdf

《ETSI EN 302 064-2016 Wireless Video Links operating in the 1 3 GHz to 50 GHz frequency band Harmonised Standard covering the essential requirements of article 3 2 of Directive 2014.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 302 064-2016 Wireless Video Links operating in the 1 3 GHz to 50 GHz frequency band Harmonised Standard covering the essential requirements of article 3 2 of Directive 2014.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 302 064 V2.1.1 (2016-09) Wireless Video Links operating in the 1,3 GHz to 50 GHz frequency band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 302 064 V2.1.1 (2016-09) 2 Reference REN/ERM-TG17-11 Keyw

2、ords harmonised standard, radio, SHF, SRD, UHF, video ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important

3、notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written autho

4、rization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should

5、be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the follow

6、ing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF ve

7、rsion shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI regi

8、stered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 302 064 V2.1.1 (2016-09) 3 Contents Intellec

9、tual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 7g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 8g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 10g33.3 Abbreviations . 10g34 General . 11g34.1 Present

10、ation of equipment for testing purposes 11g34.1.1 Introduction. 11g34.1.2 Choice of model for testing 11g34.1.2.1 Definitions of alignment and switching ranges . 11g34.1.2.2 Alignment range 11g34.1.3 Choice of frequencies . 11g34.1.4 Testing of single channel equipment 11g34.1.5 Testing of two chann

11、el equipment 12g34.1.6 Testing of multi-channel equipment (more than two channels) 12g34.1.7 Testing of equipment without a permanent external RF port 12g34.1.8 Equipment with a permanent internal RF port 12g34.1.9 Equipment with a temporary RF port . 12g34.1.10 Frequency tolerance 12g34.2 Mechanica

12、l and electrical design 12g34.2.1 General 12g34.2.2 Controls 12g34.2.3 Performance testing with integral antenna 12g34.2.4 Marking (equipment identification) 13g34.3 Interpretation of the measurement results 13g35 Test conditions, power sources and ambient conditions 13g35.1 Normal and extreme test-

13、conditions . 13g35.2 Test power source . 13g35.3 Normal test conditions 14g35.3.1 Normal temperature and humidity 14g35.3.2 Normal test power source voltage . 14g35.3.2.1 Mains voltage 14g35.3.2.2 Other power sources 14g35.3.3 Normal modulation . 14g35.4 Extreme test conditions 15g35.4.0 General 15g

14、35.4.1 Extreme temperatures . 15g35.4.1.0 General 15g35.4.1.1 Procedures for tests at extreme temperatures 15g35.4.2 Extreme test power source voltages 15g35.4.2.1 Mains voltage 15g35.4.2.2 Rechargeable battery power sources . 15g35.4.2.3 Power sources using other types of batteries . 16g35.4.2.4 Ot

15、her power sources 16g36 General conditions 16g3ETSI ETSI EN 302 064 V2.1.1 (2016-09) 4 6.1 Artificial antenna 16g36.2 Test fixture . 16g36.3 Test site and general arrangements for radiated measurements 17g36.4 Arrangement for test signals at the input of the transmitter . 17g37 Methods of measuremen

16、t and limits for transmitter parameters 17g37.1 General . 17g37.2 Rated output power 17g37.2.1 Definition 17g37.2.2 Method of measurement at the antenna port . 17g37.2.3 Limit . 18g37.3 Channel bandwidth . 18g37.3.1 Definition 18g37.3.2 Design considerations . 18g37.3.3 Measurement of necessary band

17、width 18g37.3.4 Necessary bandwidth limits 19g37.3.4.1 Integrated power limits relative to PMEAN19g37.3.4.2 Discrete spectral components relative to PMAX20g37.4 Spurious emissions . 20g37.4.1 Definition 20g37.4.2 General requirements 20g37.4.3 Measuring receiver . 21g37.4.4 Method of measurement con

18、ducted spurious emission. 21g37.4.5 Method of measurement cabinet spurious radiation . 22g37.4.6 Method of measurement radiated spurious emission 22g37.4.7 Limits 23g38 Receiver 23g38.1 Spurious emissions . 23g38.1.1 Definition 23g38.1.2 General 23g38.1.3 Method of measurement conducted spurious com

19、ponents . 23g38.1.4 Method of measurement cabinet radiation 24g38.1.5 Method of measurement radiated spurious components . 25g38.1.6 Limits 25g38.2 Receiver Sensitivity in Gaussian channel . 25g38.2.1 Definition 25g38.2.2 Method of measurement . 25g38.2.3 Limits 25g38.3 Blocking or desensitization 2

20、8g38.3.1 Definition 28g38.3.2 Method of Measurement . 28g38.3.3 Limits 29g38.4 Adjacent channel selectivity . 29g38.4.1 Definition 29g38.4.2 Method of measurement . 29g38.4.3 Limits 29g39 Measurement uncertainty . 30g3Annex A (normative): Relationship between the present document and the essential r

21、equirements of Directive 2014/53/EU . 31g3Annex B (normative): General description of measurement methods 32g3B.0 General . 32g3B.1 Conducted measurements . 32g3B.2 Radiated measurements 32g3Annex C (normative): Radiated measurement 34g3C.1 Test sites and general arrangements for measurements involv

22、ing the use of radiated fields . 34g3C.1.1 General . 34g3ETSI ETSI EN 302 064 V2.1.1 (2016-09) 5 C.1.2 Anechoic chamber 34g3C.1.3 Anechoic chamber with a conductive ground plane . 35g3C.1.4 Open Area Test Site (OATS) . 36g3C.1.5 Test antenna 37g3C.1.6 Substitution antenna . 37g3C.1.7 Measuring anten

23、na . 38g3C.1.8 Stripline arrangement . 38g3C.1.8.1 General 38g3C.1.8.2 Description 38g3C.1.8.3 Calibration 38g3C.1.8.4 Mode of use 38g3C.2 Guidance on the use of radiation test sites . 38g3C.2.1 General . 38g3C.2.2 Verification of the test site . 38g3C.2.3 Preparation of the EUT . 39g3C.2.4 Power su

24、pplies to the EUT . 39g3C.2.5 Volume control setting for analogue speech tests 39g3C.2.6 Range length . 39g3C.2.7 Site preparation 40g3C.3 Coupling of signals . 40g3C.3.1 General . 40g3C.3.2 Data signals 40g3C.3.3 Speech and analogue signals 41g3C.3.3.0 General 41g3C.3.3.1 Acoustic coupler descripti

25、on. 41g3C.3.3.2 Calibration 41g3C.4 Standard test position . 41g3C.5 Test fixture . 42g3C.5.1 General . 42g3C.5.2 Description . 42g3C.5.3 Calibration 43g3C.5.4 Mode of use 43g3Annex D (informative): Bibliography . 44g3Annex E (informative): Change History 45g3History 46g3ETSI ETSI EN 302 064 V2.1.1

26、(2016-09) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellect

27、ual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including

28、 IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) h

29、as been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.11 to provide one voluntary means of conforming to the essential requirements of Dire

30、ctive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the n

31、ormative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. National transposition dates Date of adoption of

32、this EN: 12 September 2016 Date of latest announcement of this EN (doa): 31 December 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 June 2017 Date of withdrawal of any conflicting National Standard (dow): 30 June 2018 Modal verbs terminology In the pre

33、sent document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverable

34、s except when used in direct citation. ETSI ETSI EN 302 064 V2.1.1 (2016-09) 7 Introduction The present document is intended to specify the minimum performance characteristics and the methods of measurement for Wireless Video Links operating in the 1,3 GHz to 50 GHz frequency band. The present docum

35、ent provides the necessary parameters for equipment to obtain common approval throughout Europe. It also is intended to make it easier for the frequency management authorities to find harmonized frequency allocations. Common technical specifications and harmonized frequency allocations are expected

36、to reduce greatly the present problems of interference and illegal use. The present document covers the minimum characteristics considered necessary in order to make the best use of the available frequencies. It does not necessarily include all the characteristics that may be required by a user, nor

37、 does it necessarily represent the optimum performance achievable. The present document is a testing standard based on spectrum utilization parameters and does not include performance characteristics that may be required by the user or requirements for interfacing equipment. In preparing the present

38、 document, much attention has been given to assure a low interference probability, while at the same time allowing a maximum flexibility and service to the end-user. It does not preclude any digital modulation technique, provided that the modulated signal lies within the prescribed limits. Electroma

39、gnetic Compatibility (EMC) requirements are covered by ETSI EN 301 489-28 i.3. The present document contains instructions for the presentation of equipment for testing purposes. Transmitter Power limits are defined in the terms and conditions of the users operating licence. The present document is i

40、ntended to cover the provisions of Directive 2014/53/EU i.1, article 3.2, which states that “ radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference“. ETSI ETSI EN 302 064 V2.1.1 (2016-09) 8 1 Scop

41、e The present document applies to terrestrial wireless digital video link equipment operating in the frequency band 1,3 GHz to 50 GHz. The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avo

42、id harmful interference. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the r

43、eferenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot g

44、uarantee their long term validity. The following referenced documents are necessary for the application of the present document. Not applicable. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For

45、specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity

46、. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member

47、 States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. i.2 ETSI TR 100 027 (V1.2.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Methods of measurement for private mobile radio equipment“. i.3 ETSI EN 301 489-28: “Electromagn

48、etic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 28: Specific conditions for wireless digital video links“. i.4 ETSI TR 100 028-1 (V1.4.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncerta

49、inties in the measurement of mobile radio equipment characteristics; Part 1“. i.5 ANSI C63.5: “American National Standard for Calibration of Antennas Used for Radiated Emission Measurements in Electromagnetic Interference (EMI) Control-Calibration of Antennas (9 kHz to 40 GHz)“. i.6 ETSI TR 102 273 (all parts): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement on Radiated Methods of Measurement (using test site) and evaluation of the corresponding measurement uncertainties“. ETSI ETSI EN 302 064 V2.1.1 (2016-09) 9 i.7 CISPR 1