EN ISO TR 17424-2015 en Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts《智能运输系统 合作系统 局部动态地图概念的艺术状态》.pdf

《EN ISO TR 17424-2015 en Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts《智能运输系统 合作系统 局部动态地图概念的艺术状态》.pdf》由会员分享，可在线阅读，更多相关《EN ISO TR 17424-2015 en Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts《智能运输系统 合作系统 局部动态地图概念的艺术状态》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPD CEN ISO/TR 17424:2015PD ISO/TR 17424:2015Intelligent transport systems Cooperative systems Stateof the art of Local DynamicMaps conceptsPD CEN ISO/TR 17424:2015 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN ISO/TR 17424:2015. I

2、t supersedes PD ISO/TR 17424:2015 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/278, Intelligent transport systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport

3、 to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 90496 7ICS 03.220.01; 35.240.60Compliance with a British Standard cannot confer immunity from legal

4、 obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2015.Amendments/corrigenda issued since publicationDate Text affected30 June 2015 This corrigendum renumbers PD ISO/TR 17424:2015 as PD CEN ISO/TR 17424:2015TECHNICAL REPORT

5、RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN ISO/TR 17424 May 2015 ICS 35.240.60; 03.220.01 English Version Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015) Systmes intelligents de transport - Systmes coopratifs -tat des connaissa

6、nces des cartes dynamiques locales (ISO/TR 17424:2015) Intelligente Transportsysteme - Kooperative Systeme - Aktuelle Technologie fr lokale dynamische Kartenkonzepte (ISO/TR 17424:2015) This Technical Report was approved by CEN on 12 April 2015. It has been drawn up by the Technical Committee CEN/TC

7、 278. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

8、Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitat

9、ion in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TR 17424:2015 EPD CEN ISO/TR 17424:2015CEN ISO/TR 17424:2015 (E)CEN ISO/TR 17424:2015 (E) 3 Foreword This document (CEN ISO/TR 17424:2015) has been prepared by Technical Committee ISO/TC 204 “Intelligent t

10、ransport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent transport systems” the secretariat of which is held by NEN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held r

11、esponsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text of ISO/TR 17424:2015 has been approved by CEN as CEN ISO/TR 17424:2015 without an

12、y modification. iiForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Abbreviated terms 15 Content and structure . 25.1 Required LDM Elements (subsystems or functions) 35.1.1 Data elements and protocols . 45.2 LDM: state of the art . 65.2.1 Proposed LDM Architect

13、ures 65.3 Parts and functions not fully specified or not yet available 255.3.1 Considerations on Geo-location referencing 255.3.2 Considerations on Data Privacy .255.3.3 Considerations on Data Security .265.3.4 Considerations on data Integrity 265.3.5 Considerations on decision rules for conflicting

14、 data content 275.3.6 Considerations on LDM Synchronization 275.4 Recommendations 27Bibliography .29 ISO 2015 All rights reserved iiiContents PagePD CEN ISO/TR 17424:2015ISO/TR 17424:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standar

15、ds bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organi

16、zations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its fu

17、rther maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/direct

18、ives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the

19、Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related

20、 to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 204, Intelligent transport systems.iv ISO 2015 All ri

21、ghts reservedPD CEN ISO/TR 17424:2015ISO/TR 17424:2015(E)IntroductionIntelligent transport systems (ITS) means to apply information and communication technologies (ICT) to the transport sector. ITS can create clear benefits in terms of transport efficiency, sustainability, safety and security.To tak

22、e full advantage of the benefits that ICT-based systems and applications can bring to the transport sector, it is necessary to ensure interoperability among the different systems.Cooperative systems are ITS (Cooperative ITS) systems based on vehicle-to-vehicle (V2V), vehicle-to-infrastructure (V2I,

23、I2V) and infrastructure-to-infrastructure (I2I) communications for the exchange of information. Cooperative systems have the potential to further increase the benefits of ITS services and applications.Cooperative ITS is a subset of the overall ITS that communicates and shares information between ITS

24、 stations to give advice or facilitate actions with the objective of improving safety, sustainability, efficiency and comfort beyond the scope of stand-alone systems.The European Commission issued Mandate M/453 6 7 to invite the European Standardization Organizations (ESOs) (CEN, CENELEC and ETSI) t

25、o prepare a coherent set of standards, specifications and guidelines to support the European Communitys wide implementation and deployment of Cooperative intelligent transport systems (Cooperative ITS).CEN and ETSI have formally accepted the Mandate and will develop standards (EN) and technical spec

26、ifications and guidelines requested as far as possible within the timescale required in the Mandate. (see Reference 7)Annex C of Reference 7 proposes a “List of minimum set of standards and allocation of responsibility between CEN and ETSI Mandate M/453”.ISO/TC 204 decided in 2009 to join CENs effor

27、ts and to create a new working group (WG 18) under the Vienna agreement. This Technical Report is considered by non-European NSOs as important enough to justify having it under ISO lead.Different ITS stations (vehicle, nomadic, roadside and central) exchange geographically located information, which

28、 is of importance for the different cooperative applications (standards to be developed under the responsibility of CEN and ISO).This Technical Report delivers information about the status at the time of publication of the Local Dynamic Map (LDM) concepts as they have been developed in the different

29、 R LDM Data Storage data storage, which covers small to huge implementations supporting personnel devices, infrastructure systems, in-vehicle platforms, service providers and management centres; LDM Security means for data security; LDM Content Integrity means for maintaining data integrity and qual

30、ity, and ISO 2015 All rights reserved 3PD CEN ISO/TR 17424:2015ISO/TR 17424:2015(E) decision rules on conflicting data; LDM Privacy Policy Advisor rules on how to deal with privacy-affected static, quasi-static and dynamic content; LDM Arbiter/Screening, prioritizing means for putting multiple queri

31、es according their priority to the data storage and retrieving the response; LDM SAPs/Data access interface for writing elements into and retrieving elements from the data storage; LDM Broker shared data management for multiple application access.All the data elements and their attributes put in and

32、 out the LDM have to comply with the definition given in the LDM Data dictionary.5.1.1 Data elements and protocolsThe input to the LDM may come from many sources likely using different protocols. Messages originating from vehicles, for instance CAM and DENM, use a highly condensed protocol format to

33、 keep channel blocking at a minimum. There is only a minimum of additional information contained in the message itself to decide on reliability and confidence. Other input sources are radio broadcasts (RDS, DAB, DVB, DMB) using, e.g. TMC or TPEG protocol, traffic centre using DATEX/DATEX2 or HTML-ba

34、sed application data exchange format and so on. If data from different sources addressing the same event have a contradicting meaning, the following additional decision-relevant information has to be considered to get the most accurate information: Who is the issuer of the information? How and when

35、was the information generated? What is the accuracy of the information? How was the information transmitted? Where and under which condition is the information valid?5.1.1.1 TPEG in detailDetailed information on TPEG is provided in 21.TPEG (Transport Protocol Experts Group) specifications9 offer a m

36、ethod for transmitting multimodal traffic and travel information, regardless of client type, location or required delivery channel (e.g. DAB, HD radio, Internet, DVB-x, DMB, GPRS, Wi-Fi ). Language independence has also been a prime principle in the design.5.1.1.1.1 How does TPEG work?In contrast to

37、 TMC (event-based road traffic information), TPEG refers to a whole set or toolkit of specifications, for offering a wider range of services to a wider range of users and devices.TPEG services are defined in a modular way and can therefore vary in a number of “directions”: application, e.g. Road Tra

38、ffic Messages, Public Transport Information or Parking Information. Each Application is uniquely identified by an Application ID (AID) that are allocated by the TPEG Application Working Group (TAWG) of TISA;4 ISO 2015 All rights reservedPD CEN ISO/TR 17424:2015 ISO/TR 17424:2015(E) transmission meth

39、od, e.g. DAB digital radio, DMB, Internet; location referencing method, e.g. table-based (using for example TMC location tables) or on-the-fly (using a method that gives a location reference that works with or without maps and does not require a look-up table to decode in the receiver); device, e.g.

40、 intended for vehicle navigation systems, Internet browsers or mobile devices; conditional access: whether data are sent for free or only to users/devices who have somehow established the right to receive it, e.g. by paying a subscription. Encryption of TPEG data are possible by means of Standardise

41、d Encryption Indicators, which are allocated by the TPEG Application Working Group (TAWG) of TISA.The term “profile” is used to define a combination of the above which, together, make up what one might think of as a single TPEG service. For example: displaying traffic incidents on a map graphic and

42、supporting re-routing or route optimization; displaying public transport status information on a cell phone screen.5.1.1.1.2 TPEG Service IDsAny TPEG-service is uniquely identified worldwide by a TPEG Service ID (SID) consisting of three elements called SID-A, SID-B, SID-C, as described in ISO/TS 18

43、234-2. TISA, as worldwide registrar for TPEG SID, is responsible for allocating and maintaining TPEG Service IDs in a Registry to ensure a worldwide unique identification of a TPEG service.Each TPEG Application is assigned a unique number called the Application Identifier (AID) which is standardized

44、 in ISO/TS 18234-1. An AID is defined whenever a new application is developed. The AIDs allocated at the time of publication of this Technical Report are the following (see Table 1):Table 1 TPEG AID tableAID Number (Hex) Application Abbreviated term0 Service and Network Information application SNI1

45、Road Traffic Message application RTM2 Public Transport Information application PTI3 Parking Information application PKI4 Congestion and Travel Time application CTT5 Traffic Event Compacy application TEC6 Conditional Access Information application CAI7 Traffic Flow and Prediction TFP8 Fuel Price Info

46、rmation FPI5.1.1.2 DATEX/DATEX2Detailed Information on DATEX/DATEX2 are provided in22.5.1.1.2.1 BackgroundDelivering European Transport Policy in line with the ITS Action Plan of the European Commission requires coordination of traffic management and development of seamless pan-European services. Wi

47、th the aim to support sustainable mobility in Europe, the European Commission has been supporting the development of information exchange mainly between the actors of the road traffic management domain for a number of years. In the road sector, the DATEX standard was developed for information exchan

48、ge between traffic management centres, traffic information centres and service providers and constitutes ISO 2015 All rights reserved 5PD CEN ISO/TR 17424:2015ISO/TR 17424:2015(E)the reference for applications that have been developed in the past 10 years. At the time of publication of this Technica

49、l Report, the second generation DATEX II specification also pushes the door wide open for all actors in the traffic and travel information sector.Much investment has been made in Europe, both in traffic control and information centres over the last decade and also in a quantum shift in the monitoring of the trans-European transport network (TEN-T). This is in line with delivering the objectives of the EasyWay programme 17 for safer roads, reduced congestion and a better environment. Collecting information is