EN ISO 17642-1-2004 en Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1 General《金属材料的焊接的有损试验 焊件的冷裂试验弧焊过程 第1部分 通.pdf

《EN ISO 17642-1-2004 en Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1 General《金属材料的焊接的有损试验 焊件的冷裂试验弧焊过程 第1部分 通.pdf》由会员分享，可在线阅读，更多相关《EN ISO 17642-1-2004 en Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1 General《金属材料的焊接的有损试验 焊件的冷裂试验弧焊过程 第1部分 通.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 17642-1:2004 Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 1: General The European Standard EN ISO 17642-1:2004 has the status of a British Standard ICS 25.160.40 BS EN ISO 17642-1:2004 This British Standard w

2、as published under the authority of the Standards Policy and Strategy Committee on 11 August 2004 BSI 11 August 2004 ISBN 0 580 44251 9 National foreword This British Standard is the official English language version of EN ISO 17642-1:2004. It is identical with ISO 17642-1:2004. The UK participation

3、 in its preparation was entrusted to Technical Committee WEE/2, Welding tests, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publicat

4、ions referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necess

5、ary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interp

6、retation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, pages 2 to 5 and a back cover. The BSI c

7、opyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO176421 August2004 ICS25.160.40 Englishversion DestructivetestsonweldsinmetallicmaterialsColdcracking t

8、estsforweldmentsArcweldingprocessesPart1:General (ISO176421:2004) Essaisdestructifsdessouduressurmatriauxmtalliques Essaisdefissurationfroiddesassemblagessouds ProcdsdesoudagelarcPartie1:Gnralits(ISO 176421:2004) ZerstrendePrfungvonSchweiverbindungenan metallischenWerkstoffenKaltrissprfungenfr Schwe

9、iungenLichtbogenschweiprozesseTeil1: Allgemeines(ISO176421:2004) ThisEuropeanStandardwasapprovedbyCENon9February2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelist

10、sandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguagea

11、ndnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, S

12、lovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.

13、ENISO176421:2004:EENISO176421:2004(E) 2 Contents page Foreword. 3 1 Scope . 4 2 Normativereferences . 4 3 Termsanddefinitions. 4 4 Fundamentals 5ENISO176421:2004(E) 3 Foreword Thisdocument(ENISO176421:2004)hasbeenpreparedbyTechnicalCommitteeCEN/TC121“Welding”, thesecretariatofwhichisheldbyDIN,incoll

14、aborationwithTechnicalCommitteeISO/TC44“Weldingand alliedprocesses”. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidentical textorbyendorsement,atthelatestbyFebruary 2005,andconflict ingnationalst andardsshallbewithdrawn atthelatestbyFebruary 2005 . ENISO17642c

15、onsistsofthefollowingparts,underthegeneraltitle Destructivetestsonweldsinmetallic materialsColdcrackingtestsforweldmentsArcweldingprocesses : Part1:General Part2:Selfrestrainttests Part3:Externallyloadedtests AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowin

16、g countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,Cyprus,CzechRepublic, Denmark,Estonia,Finland,France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania, Luxembourg,Malta,Netherlands,Norway,Poland,Portugal,Slovakia,Slovenia,Spain,Sweden,Switzerland andUnitedKingdom.ENISO

17、176421:2004(E) 4 1Scope Thisstandarddescribesthefundamentalsofcoldcrackformationandtheprinciplesofcoldcrackingtests. Thesetestscanbeusedtodeterminethecoldcrackingsensitivityofweldingconsumables,parentmaterials, weldmetal.Themostcommontestsaredescribed(afterreferredtohydrogencracking). Inaddition,ano

18、verviewisgivenofthecoldcrackingtestprocedures,theirclassification,andtheirfieldsof applicationarewithinENISO176422andENISO176423. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromotherpublications. Thesenormativereferencesarecitedattheappropriateplacesint

19、hetext,andthepublicationsarelisted hereafter.Fordatedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplyto thisEuropeanStandardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthe latesteditionofthepublicationreferredtoapplies(includingamendments). ENISO176422

20、DestructivetestsonweldsinmetallicmaterialsColdcrackingtestsforweldments ArcweldingprocessesPart2:Selfrestrainttests(ISO176422:2004). ENISO176423 DestructivetestsonweldsinmetallicmaterialsColdcrackingtestforweldments ArcweldingprocessesPart3:Externallyloadedtests(ISO176423:2004). 3 Termsanddefinition

21、s ForthepurposesofthisEuropeanStandard,thefollowingtermsanddefinitionsapply. 3.1 coldcracks localrupture(intergranularortransgranular)appearingasaresultofacriticalcombinationofmicrostructure, stressandhydrogencontent NOTE1 Coldcracksarealsoknownashydrogencracksordelayedcracks. NOTE2 Coldcrackingoccu

22、rsattemperaturesbelowthesolidustemperature,sometimesdaysafterfabrication. 3.2 coldcrackingtestprocedures proceduresfordeterminingthecoldcrackingsensitivityofparentmaterials,weldsmetalandweldedjoints,in respectwiththeweldingprocedureused 3.3 selfrestrainttests testswherespecimenloadingisproducedbyres

23、idualstressesdevelopedduringandafterweldingofa restrainedweldment 3.4 externallyloadedtests testswherespecimenstressingistheresultofthetestprocedureandwherethespecimenisloaded externallyENISO176421:2004(E) 5 4Fundamentals Coldcracksoccuraftercompletecoolingwhenacriticalcombinationofmicrostructure,ap

24、pliedstressand hydrogenisexceeded: Themicrostructureisdefinedmainlybythechemicalanalysisandthecoolingtimebetween800Cand 500C(t8/5). Theappliedstressisinfluencedprimarilybythepotentialstresslevel,i.e.theyieldpointofthematerial, therestraintandshrinkagestressesappearinginthevicinityoftheweldimmediatel

25、yafterthewelding operation. Thehydrogencontentisdependentonthehydrogeninputasafunctionofthemoistureofthecoatingor fluxandthehydrogendiffusionasafunctionofthepreheat,interpassandholdingtemperature. NOTE ForsteelsforwhichthetransformationpointAc1isfarbelow500C,coolingtimebetween700Cand300C ismorerepre

26、sentative. Inthecoldcrackingtestprocedures,usingselfrestraintspecimens,thestressusedfortestingisprovided entirelybyweldshrinkage.Forthetypeofresultsandthemainapplication,seeTable1. Inthecoldcrackingtestprocedurewithexternallyloadedspecimensadefinedloadisimposedfromoutside byasuitableloadingdeviceont

27、hespecimenwhichproducesadefinedstress.Forthetypeofresultsandthe mainapplication,seeTable2. Table1Selfrestraintcoldcrackingtests(seeENISO176422)andtheirapplications TypesofTest Applications Qualificationofweldingconsumables,parentmaterialsandweldingprocedures. CTSTest Ygroovetest (Tekkentest) Ugroove

28、test (Lehightest) Determinationof: theminimumweldingenergy, theminimumpreheattemperature, theminimumholdingtemperature, themaximumdiffusiblehydrogencontent. NOTE Theprocedureprovidesaqualitative(cracks/nocracks)orquantitative(determinationofthe cracks/nocrackslimit)evaluation. Table2Externallyloaded

29、coldcrackingtest(seeENISO176423)anditsapplications Typeoftest Applications Implanttest Qualificationtestforconsumables,basematerials. Determinationof: theminimumweldingenergy, theminimumpreheattemperature, theminimuminterpasstemperature, theminimumholdingtemperature, themaximumdiffusiblehydrogencont

30、ent, thecriticalstress. NOTE Theprocedureprovidesaqualitative(cracksornocracks,singletest)orquantitative(crack/nocrack boundarydetermination)assessment.BS EN ISO 17642-1:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible f

31、or preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or

32、 editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on t

33、he inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards pub

34、lications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of thos

35、e that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information service

36、s are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase

37、price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further infor

38、mation about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no

39、 extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such a

40、s symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.