EN ISO 16805-2005 en Binders for paints and varnishes Determination of glass transition temperature《色漆和清漆用粘合剂 玻璃化转变温度的测定》.pdf

《EN ISO 16805-2005 en Binders for paints and varnishes Determination of glass transition temperature《色漆和清漆用粘合剂 玻璃化转变温度的测定》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 16805-2005 en Binders for paints and varnishes Determination of glass transition temperature《色漆和清漆用粘合剂 玻璃化转变温度的测定》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN ISO 16805:2005Incorporating Amendment No. 1 to BS ISO 16805:2005 (renumbers BS ISO as BS EN ISO 16805:2005)Binders for paints and varnishes Determination of glass transition temperatureThe European Standard EN ISO 16805:2005 has the status of a British StandardICS 87.040; 87.06

2、0.20 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN ISO 16805:2005This British Standard was published under the authority of the Standards Po

3、licy and Strategy Committee on 2 February 2005 BSI 2006ISBN 0 580 45381 2 National forewordThis British Standard is the English language version of EN ISO 16805:2005. It is identical with ISO 16805:2003.The UK participation in its preparation was entrusted to Technical Committee STI/3, Paints, media

4、 and related products, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international publications referred to in this document may be found in the BSI Catalogue un

5、der the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct app

6、lication. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; moni

7、tor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN ISO title page, page 2, the ISO title page, pages ii to iv, pages 1 and 2, an inside back cover and a back cover.The BSI copyright no

8、tice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date Comments15790 31 August 2006 Renumbers BS ISO 16805:2005 as BS EN ISO 16805:2005EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 16805May 2005ICS 87.040; 87.060.20English

9、 versionBinders for paints and varnishes Determination of glasstransition temperature (ISO 16805:2003)Liants pour peintures et vernis Dtermination de latemprature de transition vitreuse (ISO 16805:2003)Bindemittel fr Beschichtungsstoffe Bestimmung derGlasbergangstemperatur (ISO 16805:2003)This Europ

10、ean Standard was approved by CEN on 10 April 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concer

11、ning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own lang

12、uage and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malt

13、a, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in a

14、ny form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 16805:2005: EEN ISO 16805:2005 2 Foreword The text of ISO 16805:2003 has been prepared by Technical Committee ISO/TC 35, Paints and varnishes, of the International Organization for Standardization (ISO) and has been

15、taken over as EN ISO 16805:2005 by Technical Committee CEN/TC 139, Paints and varnishes, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2005, and

16、 conflicting national standards shall be withdrawn at the latest by November 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Esto

17、nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 16805:2003 has been approved by CEN as EN ISO 16

18、805:2005 without any modifications. Reference numberISO 16805:2003(E)OSI 3002INTERNATIONAL STANDARD ISO16805First edition2003-10-15Binders for paints and varnishes Determination of glass transition temperature Liants pour peintures et vernis Dtermination de la temprature de transition vitreuse EN IS

19、O 16805:2005IS:50861 O3002(E) DPlcsid Fremia ihTs PDF file mya ctnoian emdebt dedyfepcaes. In ccacnadrow eitA hebods licnesilop gnic,y tihs file mirp eb yatnde iv roweb detu slahl ton ide ebtlnu deess teh typfecaes wihce era hml era deddebicsnede ti dna onstlalde t noeh comuptfrep reromign tide ehti

20、n.g In wodlnidaot gnihs fil,e trapise atpecc tiereht nser ehnopsiiblity fo nto ifnriigngn Aebods licnesilop gnic.y ehT ISO tneClar Secrteirata caceptl on siibality in this .aera Ai ebods a tedarmfo kra Aebod SystemI snctaropro.de teDials fo teh sfotwcudorp erats sut deo crtaee tihs PDF file cna f eb

21、i dnuon tlareneG eh Ifnler oatit evt oeh file; tP ehDc-Frtaeino marapterew stpo ereimizde fro irptni.gn Evyre cera neeb sah takne tsne oeru taht teh file is siutlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem lertait gno it is f,dnuo plsaee ifnrom ttneC ehlar Secterirata ta t

22、eh serddaig sleb nevwo. ISO 3002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mceinahcla, incliduntohp gcoiypodna gn micrfoilm, wittuoh repmissii now nritign from ietI rehSa Ot tsserdda eh ebolw

23、or ISOs memreb i ydobn the cnuotfo yr ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 avleT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mial coirypthgis.o groWe bwww.is.o groii ISO 3002 Allr ihgtsser edevrIS:50861 O3002(E) I SO 3002 All irhgts seredevr iiiForeword ISO (the Intern

24、ational Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has b

25、een established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical sta

26、ndardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies f

27、or voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or a

28、ll such patent rights. ISO 16805 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 10, Test methods for binders for paints and varnishes. EN ISO 16805:2005ISO 16805:2003(E) iv I SO 3002 All irhgts seredevrIntroduction The determination of the glass transition tempe

29、rature (Tg) is a very accurate and reproducible way of characterizing polymers. However, there are a number of factors which have to be considered if a standard for the determination of the Tgis to be developed. The Tgof a polymer is dependent on the heating rate, the moisture content of the sample

30、and also on the amount of sample used. Since sample preparation is a very important part of the procedure (and a special method may be necessary for binders for paints and varnishes), this International Standard specifies only the procedure for sample preparation. The measurement procedure itself is

31、 already specified in another International Standard. EN ISO 16805:2005INTENRATIONAL TSANDADR IS:50861 O3002(E)I SO 3002 All irhgts seredevr 1Binders for paints and varnishes Determination of glass transition temperature 1 Scope This International Standard specifies the procedure to be used for samp

32、le preparation for the determination of the glass transition temperature of binders for paints and varnishes, including coating powders, by differential scanning calorimetry (DSC). The method to be used for determining the glass transition temperature is specified in ISO 11357-2. 2 Normative referen

33、ces The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 15528, Paints, varnishes and raw material

34、s for paints and varnishes Sampling ISO 11357-1, Plastics Differential scanning calorimetry (DSC) Part 1: General principles ISO 11357-2:1999, Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature 3 Terms and definitions For the purposes of this docum

35、ent, the following terms and definitions apply. 3.1 glass transition reversible change in an amorphous polymer or in amorphous regions of a partially crystalline polymer from (or to) a viscous rubbery condition to (or from) a hard and brittle one NOTE It is the temperature at which the rotational de

36、grees of freedom of a polymer are excited. Adapted from ISO 11357-2:1999 3.2 glass transition temperature approximate midpoint of the temperature range over which the glass transition takes place NOTE 1 The assigned glass transition temperature (Tg) may vary, depending on the specific property and o

37、n the method and conditions selected to measure it. NOTE 2 The so-called onset temperature (see ISO 11357-2), which can also be used, is often more accurately defined. NOTE 3 To avoid interference or inaccurate measurements due to relaxation or evaporation of solvent/water residues, it can be better

38、 to carry out the measurement twice with the same sample and report the second result. Adapted from ISO 11357-2:1999 EN ISO 16805:2005IS:50861 O3002(E) 2 I SO 3002 All irhgts seredevr4 Sampling and sample preparation Take a representative sample of the binder to be tested, as described in ISO 15528.

39、 Using a film applicator with a gap 40 m to 50 m high, apply the binder at a suitable wet-film thickness arbitrarily 20 m to 25 m (= 0,8 to 1,0 mills/thous), alternatively as specified by the user to a suitable flat, inert and non-porous substrate which will permit easy removal of the film when drie

40、d. Substrates like glass, polytetrafluoroethylene (PTFE) or ethylene/propylene diene terpolymer (EPDM) are possible candidates if inert to the binder concerned. Store the wet film under suitable atmospheric conditions and for a sufficient length of time to permit full drying. If systems are to be co

41、mpared, the same times and conditions shall be used for each system. NOTE The length of time necessary varies depending on the composition, e.g. the solvent/water content. Elevated temperatures may be used, although consideration should be given when selecting the temperature to factors such as the

42、thermal decomposition of the binder and also the presence of any thermally reactive binder components, e.g. crosslinking agents, as these will influence the value of the glass transition temperature. After drying, place a specimen of known mass of the film in a DSC pan, ensuring good contact between

43、 the film and the pan, as specified in ISO 11357-2:1999, Subclause 9.2. 5 Procedure Carry out the determination as specified in ISO 11357-2. 6 Expression of results See ISO 11357-2. 7 Precision See ISO 11357-2. 8 Test report The test report shall contain at least the following information: a) a refe

44、rence to this International Standard (ISO 16805); b) all details necessary for complete identification of the product tested (manufacturer, trade name, batch number, etc.); c) all details concerning sample preparation, such as the substrate, application method and drying conditions used, as well as

45、the test temperature (room temperature or higher temperature, if used) and pressure (under a vacuum or at ambient pressure); d) the result of the test and the test parameters, as indicated in ISO 11357-1 and ISO 11357-2; e) whether the result was based on the onset or midpoint temperature and whethe

46、r the first or second measurement was used; f) any deviation from the test method specified; g) the date of the test. EN ISO 16805:2005blankBS EN ISO 16805:2005 BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing Britis

47、h Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the c

48、onstant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover.

49、 Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for internat