EN ISO 15610-2003 en Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables《金属材料焊接程序的规范和认可 基于试验消耗品的认可 代替EN.pdf

《EN ISO 15610-2003 en Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables《金属材料焊接程序的规范和认可 基于试验消耗品的认可 代替EN.pdf》由会员分享，可在线阅读，更多相关《EN ISO 15610-2003 en Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables《金属材料焊接程序的规范和认可 基于试验消耗品的认可 代替EN.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 15610:2003 Specification and qualification of welding procedures for metallic materials Qualification based on tested welding consumables The European Standard EN ISO 15610:2003 has the status of a British Standard ICS 25.160.10 BS EN ISO 15610:2003 This British Standard w

2、as published under the authority of the Standards Policy and Strategy Committee on 3 December 2003 BSI 3 December 2003 ISBN 0 580 43045 6 National foreword This British Standard is the official English language version of EN ISO 15610:2003. It is identical with ISO 15610:2003. It supersedes BS EN 28

3、8-5:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/36, Approval of welding procedures and welders, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-refe

4、rences The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of Britis

5、h Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present

6、to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an insi

7、de front cover, the EN ISO title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO1

8、5610 November2003 ICS25.160.10 Supersedes EN2885:1994 Englishversion Specificationandqualificationofweldingproceduresformetallic materialsQualificationbasedontestedweldingconsumables (ISO15610:2003) Descriptifetqualificationdunmodeopratoiredesoudage pourlesmatriauxmtalliquesQualificationbasesur desp

9、roduitsconsommablessoumisessais(ISO 15610:2003) AnforderungundQualifizierungvonSchweiverfahrenfr metallischeWerkstoffeQualifizierungaufgrunddes EinsatzesvongeprftenSchweizustzen(ISO 15610:2003) ThisEuropeanStandardwasapprovedbyCENon7May2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegula

10、tionswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions

11、(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Gree

12、ce, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitati

13、oninanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO15610:2003EENISO15610:2003(E) 2 Contents Page Foreword3 Introduction .4 1 Scope 4 2 Normativereferences 5 3 Termsanddefinitions. .5 4 Preliminaryweldingprocedurespecifications(pWPS) . 5 5 Qualificationoftheweldingprocedure

14、.5 6 Rangeofqualification .5 7 Validity 7 8 WeldingProcedureQualificationRecord(WPQR) . 7 Bibliography 8ENIS O 15610:2003 (E) 3 Foreword Thisdocument(ENISO15610:2003)hasbeenpreparedbyTechnicalCommitteeCEN/TC 121“Welding“,the secretariat ofw hich ish eld by DS, inc ollaboration withISO/ TC4 4 “Weldin

15、g and alliedprocesses“. ThisEurop ean StandardENISO 15610:2003sh all be given thes tatusof a nationalst andard, either by publication ofanidenticaltextorbyendorsement,atthelatestbyMay2004,andconflictingnationalstandardsshallbe withdrawna t thelatest byMay20 04. Thisdocu mentsupersedesEN2 885: 1994.

16、This document hasbe enpr eparedu ndera mandate given to CEN by the EuropeanCo mmissionandtheEurop ean Free TradeAssocia tion. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuro peanStandard:Austria,Belgium,CzechRepublic,D

17、enmark,Finland, France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal, Slovakia,S pain, Sweden,Swi tzerlandandtheUnitedKin gdom.ENISO15610:2003(E) 4 Introduction InENISO15607,oneofthemethodsofweldingprocedurequalificationisbasedontestedweldingconsumables. 1

18、Scope ThisEuropeanStandardisapartofaseriesofstandards,detailsofthisseriesaregiveninENISO15607:2003, annexA. ThisstandardgivesthenecessaryinformationtoexplaintherequirementsreferencedinENISO15607:2003about thequalificationofweldingproceduresbasedontestedconsumables. Inaddition,itgivestherangeofqualif

19、ication. ThisEuropeanStandardappliestoarcandgasweldinginaccordancewithTable1. Table1Applicableweldingprocesses Processnumber accordingtoEN ISO4063 Weldingprocess Process applicable foralloys basedon steel Process applicable foralloys basedon aluminium 111 Manualmetalarcwelding(metalarc weldingwithco

20、veredelectrode) X 114 Selfshieldedtubularcoredarc welding X 131 Metalinertgaswelding;MIG welding XX 135 Metalactivegaswelding;MAG welding X 136 Tubularcoredmetalarcweldingwith activegasshield X 137 Tubularcoredmetalarcweldingwith inertgasshield X 141 Tungsteninertgaswelding;TIG welding XX 15 Plasmaa

21、rcwelding X X 3 Gaswelding X NOTEXindicatestheprocessforwhichENISO15610isapplicableandindicatestheprocess forwhichthestandardisnotapplicable. Otherfusionweldingprocessesmaybeacceptedifspecified. Thisstandardislimitedtoapplicationtoparentmetalswhichproduceacceptablemicrostructuresandpropertiesin theh

22、eataffectedzonewhichdonotdeterioratesignificantlyinservice.ENISO15610:2003(E) 5 Thisstandardisnotapplicablewhererequirementsforhardnessorimpactproperties,preheating,controlledheat input,interpasstemperatureandpostweldheattreatmentarespecifiedfortheweldedjoint. Theuseofthisstandardmayalsoberestricted

23、byanapplicationstandardoraspecification. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetext,andthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorr

24、evisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). ENISO4063, WeldingandalliedprocessesNomenclatureofprocessesandreferencenumbers(ISO 4063:1998). ENISO1

25、5607:2003, SpecificationandqualificationofweldingproceduresformetallicmaterialsGeneralrules (ISO15607:2003). CRISO15608, WeldingGuidelinesforametallicmaterialgroupingsystem(ISO/TR15608:2000). prENISO156091, SpecificationandapprovalofweldingproceduresformetallicmaterialsWeldingprocedure specification

26、Part1:Arcwelding(ISO/DIS156091:2000). ENISO156092, SpecificationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure specificationPart2:Gaswelding(ISO156092:2001). 3 Termsanddefinitions ForthepurposesofthisEuropeanStandard,thetermsanddefinitionsgiveninENISO15607:2003apply. 4 Preli

27、minaryweldingprocedurespecifications(pWPS) ThequalificationofaweldingprocedurebasedontestedweldingconsumablesshallbebasedonapWPS accordingtoprENISO156091orENISO156092.ThispWPSshallspecifytherangeforalltherelevant parameters. 5 Qualificationoftheweldingprocedure Theessentialitemsforthequalificationar

28、e: specificationsofparentmetal(s)tobeused; weldingconditionsspecifiedbythemanufacturerofthetestedweldingconsumablesasshowninthe manufacturerspublishedliterature; aspecificpWPStobeselectedaccordingtoprENISO156091orENISO156092andsuitableforthe application. 6 Rangeofqualification 6.1General Allthecondi

29、tionsofqualificationstatedbelowshallbemetindependentlyofeachother.ENISO15610:2003(E) 6 Changesoutsideoftherangesofqualificationshallrequireanotherweldingprocedurequalification. 6.2Relatedtotheweldedjoint 6.2.1 Parentmaterial ThisstandardisapplicableforlimitedgroupsofmaterialsdefinedinTable2. Table2A

30、pplicablegroupsofmaterials CRISO15608 Steel CRISO15608 aluminiumanditsalloys 1.1 8.1 21 22.1 22.2 Jointsbetweendissimilarmaterialgroupsarenotpermitted,exceptforjointsbetweengroup22.1andgroup22.2. 6.2.2 Parentmaterialthickness Thisstandardisapplicabletothicknesses3mm t 40mm. 6.2.3 Filletweldthroatthi

31、ckness Thisstandardisapplicableto a 3mm. 6.2.4 Diameterofpipes Thisstandardisapplicabletopipediameter D25mm. 6.3Commontoallweldingprocesses 6.3.1Multiprocess Multiprocessproceduresarepermittedprovidingtestedconsumablesareusedthroughouttheweld. 6.3.2 Weldingpositions Theweldingpositionisrestrictedtot

32、hepositionsidentifiedinthemanufacturersliterature. 6.3.3 Weldingconsumables Thequalificationisrestrictedtothemanufacturerandtradenameoftheweldingconsumablesselected. 6.3.4 Typeofcurrent Thetypeofcurrentandpolarityarelimitedtothoseidentifiedinthemanufacturersliterature. 6.4Specifictoeachweldingproces

33、s 6.4.1 Processes131,135,136and137 Theshieldinggas(faceand/orback)islimitedtothoseidentifiedinthemanufacturersliterature. Thequalificationisrestrictedtothesinglewirewelding.ENISO15610:2003(E) 7 6.4.2 Process141and15 Theshieldinggas(faceand/orback)islimitedtothoseidentifiedinthemanufacturersliteratur

34、e. 7Validity Theweldingproceduremaybeusedaslongastheweldingconditionsrecommendedbytheconsumables manufactureraremet. 8 WeldingProcedureQualificationRecord(WPQR) TheWPQRshallconsistofcopiesofrelevantmanufacturersliteraturesupportingtheweldingconditionsgivenin thepWPSandanindicationofthefillermetalsta

35、ndardtowhichthefillermetalwastested,ifany.Therelevant itemslistedfortheWPSintherelevantpartofprENISO15609shallbeincluded.IfthepWPSisconsistentwith themanufacturersliterature,theWPQRshallbesignedanddatedbytheexaminerorexaminingbody.ENISO15610:2003(E) 8 Bibliography EN439, ISO14175, Weldingconsumables

36、Shieldinggasesforarcweldingandcutting. WeldingconsumablesShieldinggasesforarcweldingandcutting .BS EN ISO 15610:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on

37、 standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the qu

38、ality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44

39、(0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +

40、44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless ot

41、herwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its product

42、s and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefit

43、s contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/

44、www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If th