EN ISO 13936-2-2004 en Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2 Fixed load method《纺织材料 机织物中缝合处纱线的抗滑脱性测定 第2部分 固定荷载法 ISO 13936.pdf

《EN ISO 13936-2-2004 en Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2 Fixed load method《纺织材料 机织物中缝合处纱线的抗滑脱性测定 第2部分 固定荷载法 ISO 13936.pdf》由会员分享，可在线阅读，更多相关《EN ISO 13936-2-2004 en Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2 Fixed load method《纺织材料 机织物中缝合处纱线的抗滑脱性测定 第2部分 固定荷载法 ISO 13936.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 13936-2:2004 Textiles Determination of the slippage resistance of yarns at a seam in woven fabrics Part 2: Fixed load method The European Standard EN ISO 13936-2:2004 has the status of a British Standard ICS 59.080.30 BS EN ISO 13936-2:2004 This British Standard was publis

2、hed under the authority of the Standards Policy and Strategy Committee on 6 May 2004 BSI 6 May 2004 ISBN 0 580 43740 X National foreword This British Standard is the official English language version of EN ISO 13936-2:2004. It is identical with ISO 13936-2:2004. The UK participation in its preparati

3、on was entrusted to Technical Committee TCI/24, Textiles Physical testing, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications

4、 referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary

5、provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpreta

6、tion, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page

7、, page ii to iv, pages 1 to 9 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO139362 April2004 ICS59.080.30 Englishversion

8、TextilesDeterminationoftheslippageresistanceofyarnsata seaminwovenfabricsPart2:Fixedloadmethod(ISO13936 2:2004) TextilesDterminationdelarsistanceauglissementdes filsdecouturedanslestissusPartie2:Mthodedela chargefixe(ISO139362:2004) TextilienBestimmungdesSchiebewiderstandesvon GarneninGewebenhtenTei

9、l2:Verfahrenmit festgelegterKraft(ISO139362:2004) ThisEuropeanStandardwasapprovedbyCENon9April2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographica

10、lreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManag

11、ementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spai

12、n,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO139362:2004EForew

13、ord Thisdocument(ENISO139362:2004)hasbeenpreparedbyTechnicalCommitteeISO/TC38 “Textiles“incollaborationwithTechnicalCommitteeCEN/TC248“Textilesandtextileproducts“, thesecretariatofwhichisheldbyBSI. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationof anidenticaltextorby

14、endorsement,atthelatestbyOctober2004,andconflictingnational standardsshallbewithdrawnatthelatestbyOctober2004. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefollowingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium, Cyprus,CzechRepublic,Denmark,E

15、stonia,Finland,France,Germany,Greece,Hungary, Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland, Portugal,Slovakia,Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. Endorsementnotice ThetextofISO139362:2004hasbeenapprovedbyCENasENISO139362:2004withoutany modification

16、s. ENISO139362:2004INTERNATIONAL STANDARD ISO 13936-2 First edition 2004-04-15 Reference number ISO 13936-2:2004(E) Textiles Determination of the slippage resistance of yarns at a seam in woven fabrics Part 2: Fixed load method Textiles Dtermination de la rsistance au glissement des fils de couture

17、dans les tissus Partie 2: Mthode de la charge fixeENISO139362:2004ii id FDPscalimer ThFDP si fam eliy ctnome niat deddebyepfa.sec In cacnadrociw eth sebodA sneciliycilop gn, thf siam elirp eb ytnide or viewb detu llahs ton tide ebed lnuet sst ehyfepcaa hcihw serdebme et desnecil era dedo tsni dnat n

18、o dellahpmoc eturep reformign ttide ehign. In odt gnidaolnwsih liferap ,tcca seitpe trehnie snopser ehtitiliby fo nto fnirA gnigniycilop gnisnecil sebod. Teh SItneC Olar Seerctraiat catpecs ibail ontily t nih.aera si Aebod t a sirramedak fo AsyS ebodtmeI snocrropta.de teDlias fo tfos ehtwcudorp erat

19、s t desutaerc ot esih FDP fb nac elif et ni dnuoG ehreneI lafnr oleative tt of eh;eli tP ehDF-rctaenoi temaraptpo erew sremizif deorp rinti.gn Evrey t neeb sah eracakt neo rusnee ttah tf ehtius si elibaf elosu re by ISO memdob rebsei. In eht kilnuyle evtne ttah a borplme rtaleit gno it si f,dnuo esa

20、elp ifnrom thtneC erla ceSrteraita ta teh sserdda vigoleb new. IOS 4002 Alr lithgs reresv.de sselnU toesiwreh sficep,dei rap ont fo thbup silitaciam nocudorper eb yde or tuilidez na nif yorm ro by nam ysnae, tcelerm ro cinocinahcela, tohp gnidulcnicopom dna gniyicrfomli, tiwuoht repsimsi noin wrtif

21、gnirtie mohI reSO ta the asserdd ebwol or ISOmem sreb obyd t nitnuoc ehry fo teh euqertsre. SIc Oopyrigho tfifce saCsop etela 65 -HCG 1121eneva 02 T.le 22 14 + 10 947 11 Fxa + 22 14 0 94774 9 Eam-il ocpyrithgios.ogr Web wwwi.soo.rg ENISO139362:2004 iii Contents Page 1 Scope 1 2 Normative references

22、1 3 Terms and definitions 1 4 Principle 2 5 Sampling . 2 6 Apparatus and materials . 2 7 Conditioning and testing atmosphere . 4 8 Preparation of test specimens . 4 9 Test procedure . 4 10 Calculation and expression of results . 5 11 Test report 5 Annex A (informative) Suggested procedure for sampli

23、ng 7 Annex B (informative) Example of pattern for cutting out test specimens from the laboratory sample . 8 Bibliography . 9 ENISO139362:2004iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of pr

24、eparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, i

25、n liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main tas

26、k of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attentio

27、n is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 13936-2 was prepared by Technical Committee ISO/TC 38, Te x t i l e s, Subcommittee SC 24, Conditioning a

28、tmospheres and physical tests for textile fabrics. ISO 13936 consists of the following parts, under the general title Tex t i l e s Determination of the slippage resistance of yarns at a seam in woven fabrics: Part 1: Fixed seam opening method Part 2: Fixed load method Part 3: Needle clamp method EN

29、ISO139362:2004ANRETNIITOTS LANDNADRA OSI -639314002:2)E(1 Textiles Determination of the slippage resistance of yarns at a seam in woven fabrics Part 2: Fixed load method 1S c o p e This part of ISO 13936 is intended for the determination of the resistance offered by thread systems of woven fabric, t

30、o slippage at a sewn seam. This method is suitable for all apparel and upholstery woven fabrics, stretch fabrics (including those containing elastomeric yarn). It is not suitable for industrial fabrics, e.g. beltings. 2 Normative references The following referenced documents are indispensable for th

31、e application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 139, Te x t i l e s Standard atmospheres for conditioning and testing ISO 4915:1991, Te x t i l e s Stit

32、ch types Classification and terminology ISO 7500-1: 1) , Metallic materials Verification of static uniaxial testing machines Part1: Tension/compression testing machines Verification and calibration of the force-measuring system ISO 10012:2003, Measurement management systems Requirements for measurem

33、ent processes and measuring equipment 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 constant rate of extension (CRE) testing machine tensile testing machine where one clamp is fixed whilst the other is moving with a constant speed throughou

34、t the test and where the entire testing system is virtually free from deflection 3.2 grab test tensile test in which only the centre part of the specimen is gripped in the jaws 1) To be published. ENISO139362:20042 3.3 yarn slippage, seam slippage movement, in a woven fabric of weft yarns over warp

35、yarns (or warp yarns over weft yarns) as a result of a pulling action NOTE Seam slippage is a fabric property and should not be confused with seam strength. 3.4 warp slippage warp yarns slipping over weft yarns, i.e. the warp yarns are at right angles to the direction of pull 3.5 weft slippage weft

36、yarns slipping over warp yarns, i.e. the weft yarns are at right angles to the direction of pull 3.6 seam allowance distance between the seam line and the adjacent edges of the material 3.7 seam opening distance between the yarns which have been displaced on either side of the seam line 4P r i n c i

37、 p l e A strip of fabric is folded and stitched across its width. The strip is cut near the fold and a force is applied to the strip at right angles to the seam using grab-test jaws. The extent to which the seam opens is measured. 5 Sampling Select samples either in accordance with the procedure lai

38、d down in the material specification for the fabric, or as agreed between the interested parties. In the absence of specification, an example of a suitable sampling procedure is given in Annex A. An example of a pattern for cutting test specimens is given in Annex B. Avoid test specimens from folded

39、 or creased areas, selvedges and areas not representative of the fabric. 6 Apparatus and materials 6.1 CRE Machine 6.1.1 Metrological confirmation system of the tensile-testing machine shall be in accordance with ISO 10012. The constant-rate-of-extension (CRE) machine shall have the general characte

40、ristics given in 6.1.2 to 6.1.7. 6.1.2 The tensile-testing machine shall be provided with means for indicating or recording the force applied to the test specimen in extending it. Under conditions of use, the accuracy of the apparatus shall be class 1 of ISO 7500-1:. The error of the indicated or re

41、corded maximum force at any point in the range in which the machine is used shall not exceed , and the error of the indicated recorded jaw separation shall not exceed . 6.1.3 If recording of force is obtained by means of data acquisition boards and software, the frequency of data collection shall be

42、 at least . 6.1.4 The machine shall be capable of constant rate of extension of , with an accuracy of . 6.1.5 The machine shall be capable of setting the gauge length to . 1% 1mm 8s 1 50 mm/min 10 % 100 mm ENISO139362:2004 3 6.1.6 The clamping device of the machine shall be positioned with the centr

43、al point of the two jaws in the line of the applied force, the front edges shall be at right angles to the line of applied force and their clamping faces shall be in the same plane. The jaws shall be capable of holding the test specimen without allowing it to slip and designed so that they do not cu

44、t or otherwise weaken the test specimen. The faces of the jaws shall be smooth and flat, except that when, even with packing, the test specimen cannot be held satisfactorily with flat-faced jaws, engraved or corrugated jaws can be used to prevent slippage. Other auxiliary materials for use with eith

45、er smooth or corrugated jaws to improve specimen gripping include paper, leather, plastics or rubber. 6.1.7 The area of the fabric clamped during the test shall be . This area can be achieved by either method a) or method b) as described below. a) The rear clamp shall be (preferably ), positioned wi

46、th the wider direction of the clamp perpendicular to the line of the application of the force; the front clamp shall be of the same dimensions positioned perpendicular to the first so that the wider direction of the clamp is parallel to the direction of the application of the force. b) The rear clam

47、p shall be (preferably ), positioned with the wider direction of the clamp perpendicular to the line of application of the force; the front clamp shall be . 6.2 Equipment for cutting test specimens 6.3 Sewing machine, electrically operated, single needle, lock stitch, capable of producing stitch typ

48、e 301 as described in ISO 4915:1991 (see Figure 1). This stitch type is formed with two threads: one needle thread and one bobbin thread. A loop of thread 1 is passed through the material from the needle side and is interlaced with thread on the other side. Thread 1 is pulled back so that the interlacing comes midway between the surfaces