EN ISO 12952-1-2010 en Textiles - Assessment of the ignitability of bedding items - Part 1 Ignition source smouldering cigarette《纺织品 床上用品的可燃性评估 引火源 阴燃香烟》.pdf

《EN ISO 12952-1-2010 en Textiles - Assessment of the ignitability of bedding items - Part 1 Ignition source smouldering cigarette《纺织品 床上用品的可燃性评估 引火源 阴燃香烟》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 12952-1-2010 en Textiles - Assessment of the ignitability of bedding items - Part 1 Ignition source smouldering cigarette《纺织品 床上用品的可燃性评估 引火源 阴燃香烟》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 12952-1:2010Textiles Assessment of theignitability of bedding itemsPart 1: Ignition source: smoulderingcigarette (ISO 12952-1:2010)BS EN ISO 12952-1:2010 BRITISH STANDA

2、RDNational forewordThis British Standard is the UK implementation of EN ISO 12952-1:2010. It supersedes BS EN ISO 12952-1:1999 and BS EN ISO 12952-2:1999, which are withdrawn.The UK participation in its preparation was entrusted to Technical Committee TCI/66/-/8, Burning behaviour.A list of organiza

3、tions represented on this committee can be obtained on request to its secretary.The limited range of ignition sources contained in BS EN ISO 12952-1:1998 and BS EN ISO 12952-3:1998 do not encompass a sufficient range of severity to enable determination of per-formance across the range of hazard cate

4、gories used within the UK. Additional testing is required to verify the performance of fabrics to the higher levels of hazard category set, other than those listed within this standard.Additional testing is required using the wooden crib based larger ignition sources when testing, to determine the p

5、erformance of fabrics to Medium Hazard category (Ignition Source 5), High Hazard category (Ignition Source 7), Very High Hazard category (Ignition Source 7, and any additional higher ignition sources).This publication does not purport to include all the necessary provisions of a contract. Users are

6、responsible for its correct application. BSI 2011 ISBN 978 0 580 64262 3 ICS 13.220.40; 97.160 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2011.Am

7、endments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12952-1 October 2010 ICS 13.220.40; 97.160 Supersedes EN ISO 12952-1:1998, EN ISO 12952-2:1998English Version Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition sour

8、ce: smouldering cigarette (ISO 12952-1:2010) Textiles - valuation de lallumabilit des articles de literie -Partie 1: Source dallumage: cigarette en combustion (ISO 12952-1:2010) Textilen - Bewertung des Brennverhaltens von Bettzeug - Teil 1: Zndquelle: glimmende Zigarette (ISO 12952-1:2010) This Eur

9、opean Standard was approved by CEN on 30 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical reference

10、s concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into

11、 its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy

12、, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000

13、Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12952-1:2010: EBS EN ISO 12952-1:2010EN ISO 12952-1:2010 (E) 3 Foreword This document (EN ISO 12952-1:2010) has been prepared By Technical Committee CEN/TC 248 “Text

14、iles and textile products”, the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC 38 “Textiles“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and

15、 conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This d

16、ocument supersedes EN ISO 12952-1:1998, EN ISO 12952-2:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia

17、, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN ISO 12952-1:2010ISO 12952-1:2010(E) ISO 2010 All rights reserved ii

18、iContents Page Foreword iv Introduction.v 1 Scope1 2 Normative references1 3 Terms and definitions .2 4 Principle3 5 Criteria of ignition3 6 Health and safety of operators.4 7 Apparatus.4 8 Cleansing6 9 Atmospheres for conditioning and testing.6 10 Test specimens7 11 Test procedures.7 12 Final exami

19、nation 11 13 Test report11 BS EN ISO 12952-1:2010ISO 12952-1:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally

20、carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the wo

21、rk. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare Inte

22、rnational Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of t

23、he elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 12952-1 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 248, Textiles and textile products, in collaborat

24、ion with Technical Committee ISO/TC 38, Textiles, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This second edition cancels and replaces ISO 12952-1:1998 and ISO 12952-2:1998, which have been technically revised. ISO 12952 consists of the following

25、 parts, under the general title Textiles Assessment of the ignitability of bedding items: Part 1: Ignition source: smouldering cigarette Part 2: Ignition source: match-flame equivalent BS EN ISO 12952-1:2010ISO 12952-1:2010(E) ISO 2010 All rights reserved vIntroduction Fires are sometimes caused by

26、the ignition of bedding items by smokers materials. The ignitability of bedding items by a smouldering cigarette or a small open flame is therefore an important feature in the assessment of the risk of fire. It cannot be assumed that protection against a smouldering ignition source will automaticall

27、y give protection against flaming ignition. Users of this part of ISO 12952 should therefore consider the need to submit test specimens to both cigarette and flaming ignition tests. This part of ISO 12952 describes test methods with a smouldering cigarette as the ignition source. Testing against the

28、 ignition source of a small open flame is covered in ISO 12952-2. This part of ISO 12952 can be used for the assessment of ignitability of individual items of bedding and of composite arrangements. This page deliberately left blankBS EN ISO 12952-1:2010INTERNATIONAL STANDARD ISO 12952-1:2010(E) ISO

29、2010 All rights reserved 1Textiles Assessment of the ignitability of bedding items Part 1: Ignition source: smouldering cigarette WARNING This test relates only to the ignitability of materials under the particular conditions of testing. It is not intended as a means of assessing the full potential

30、fire hazard of the bedding item in use. Particular attention is drawn to the possibility of ignition of lower parts of a bedding assembly when using bedding items which are not themselves ignited. The performance of beds and mattresses requires reference to testing and performance standards other th

31、an those described in this part of ISO 12952. 1 Scope This part of ISO 12952 specifies test methods for assessing the ignitability of all bedding items when subjected to a smouldering cigarette. This part of ISO 12952 applies to bedding items, which can normally be placed on a mattress, for example:

32、 mattress covers; underlays; incontinence sheets and pads; sheets; blankets; electric blankets; quilts (duvets) and covers; pillows (whatever the filling) and bolsters; pillowcases. This part of ISO 12952 does not apply to mattresses, bed bases and mattress pads. 2 Normative references The following

33、 referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3175-2, Textiles Professional care, drycleaning and wetcle

34、aning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene BS EN ISO 12952-1:2010ISO 12952-1:2010(E) 2 ISO 2010 All rights reservedISO 3175-3, Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 3: Proc

35、edure for testing performance when cleaning and finishing using hydrocarbon solvents ISO 3175-4, Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning ISO 4880, Burning behavio

36、ur of textiles and textile products Vocabulary ISO 6330:2000, Textiles Domestic washing and drying procedures for textile testing ISO 10528, Textiles Commercial laundering procedure for textile fabrics prior to flammability testing 3 Terms and definitions For the purposes of this document, the terms

37、 and definitions given in ISO 4880 and the following apply. 3.1 bed mattress placed on top of a bed base with no other bedding items present 3.2 bed assembly stack of successive layers of mattress and various bedding items, with or without a pillow and pillowcase, representing a section through the

38、centre of a made-up bed 3.3 bed base structure that supports the mattress 3.4 bedding general term for all items placed on the mattress or the bed by a user to provide comfort and warmth and/or for decorative purposes, for example, sheets, blankets, bed spreads, valances, quilts, duvets, quilt cover

39、s and mattress covers 3.5 bolster long round pillow or cushion 3.6 duvet bedding item made principally from a woven material and filled, for example, with down, feathers or filling fibres NOTE A duvet can be quilted in various ways. 3.7 incontinence sheet sheet to protect the mattress and bedding fo

40、r incontinent people 3.8 mattress product in the form of a resilient material, or padding material in combination with steel springs, enveloped by a cover fabric 3.9 mattress cover secondary covering material that can be removed for laundering purposes BS EN ISO 12952-1:2010ISO 12952-1:2010(E) ISO 2

41、010 All rights reserved 33.10 mattress pad thin filled bedding item, usually covered with a woven material, placed on the mattress to protect it and to add to the comfort of the bed 3.11 made-up bed bed prepared for use by covering with bedding items 3.12 pillow cushion for a sleepers head or any ob

42、ject used for that purpose 3.13 quilt bedcover of two thicknesses with padding sewn into compartments 3.14 underlay textile layer between the mattress and the lower sheet 4 Principle A test specimen placed on a testing substrate is subjected to a smouldering cigarette placed on top of and/or below t

43、he test specimen. Any progressive smouldering and/or flaming is noted. Where the actual mattress used is known, it can replace the testing substrate. 5 Criteria of ignition 5.1 Progressive smouldering ignition All the types of behaviour given in a) to d) are considered to be progressive smouldering

44、ignition: a) any test specimen that displays escalating combustion behaviour, making it unsafe to continue the test, and that requires forcible extinction; b) any test specimen that smoulders until it is essentially consumed, after a period of 1 h following the application of the smouldering cigaret

45、te; c) any test specimen that produces externally detectable amounts of smoke, heat or glowing, after a period of 1 h following the application of the smouldering cigarette; d) any test specimen that, on final examination (see Clause 12), shows evidence of active smouldering. NOTE In practice, it ha

46、s been found that there is usually a clear distinction between materials which can char under the influence of the smouldering cigarette, but which do not propagate further (non-progressive), and those where smouldering develops and spreads (progressive). 5.2 Flaming ignition The following behaviour

47、 is considered to be flaming ignition: the occurrence of any flames initiated by a smouldering cigarette. BS EN ISO 12952-1:2010ISO 12952-1:2010(E) 4 ISO 2010 All rights reserved6 Health and safety of operators WARNING There is a considerable risk with these tests and it is essential that suitable p

48、recautions be taken, which may include the provision of breathing apparatus and protective clothing. In the interest of safety, the tests shall be conducted in a suitable fume cupboard or purpose-built room, so that individuals are not exposed to fumes (see 7.4). Readily accessible suitable means of

49、 extinguishing the test specimens shall be provided. Extinction of test specimens can be difficult and care should be taken to dispose of them only when they are completely inert. It can be necessary to immerse smouldering specimens in water or place them in a sealed non-combustible enclosure. To ensure complete safety, other suitable steps can be required. 7 Apparatus 7.1 Test rig A suitable test rig is illustrated in Figure 1. It consists of a platform of open mesh of at least 450 mm 450 mm,