EN ISO 12944-8-2017 en Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8 Development of specifications for new work and maintenan.pdf

《EN ISO 12944-8-2017 en Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8 Development of specifications for new work and maintenan.pdf》由会员分享，可在线阅读，更多相关《EN ISO 12944-8-2017 en Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8 Development of specifications for new work and maintenan.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Paints and varnishes Corrosion protection of steel structures by protective paint systemsPart 8: Development of specifications for new work and maintenance (ISO 12944-8:2017)BS EN ISO 12944-8:2017EUROPEAN STANDARD NORME

2、 EUROPENNE EUROPISCHE NORM EN ISO 12944-8 December 2017 ICS 87.020 Supersedes EN ISO 12944-8:1998English Version Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017) Peintur

3、es et vernis - Anticorrosion des structures en acier par systmes de peinture - Partie 8: Dveloppement de spcifications pour les travaux neufs et de maintenance (ISO 12944-8:2017) Beschichtungsstoffe - Korrosionsschutz von Stahlbauten durch Beschichtungssysteme - Teil 8: Erarbeiten von Spezifikatione

4、n fr Erstschutz und Instandsetzung (ISO 12944-8:2017) This European Standard was approved by CEN on 17 November 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without a

5、ny alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other langu

6、age made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark

7、, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMM

8、ITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12944-8:2017 ENat

9、ional forewordThis British Standard is the UK implementation of EN ISO 12944-8:2017. It is identical to ISO 12944-8:2017. It supersedes BS EN ISO 12944-8:1998, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee STI/21, Paint systems and surface preparatio

10、n for metallic substrates.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 20

11、18 Published by BSI Standards Limited 2018ISBN 978 0 580 93276 2ICS 91.080.10; 87.020Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2018.Amendments/c

12、orrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 12944-8:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12944-8 December 2017 ICS 87.020 Supersedes EN ISO 12944-8:1998English Version Paints and varnishes - Corrosion protection of steel structures by protect

13、ive paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017) Peintures et vernis - Anticorrosion des structures en acier par systmes de peinture - Partie 8: Dveloppement de spcifications pour les travaux neufs et de maintenance (ISO 12944-8:2017) Beschich

14、tungsstoffe - Korrosionsschutz von Stahlbauten durch Beschichtungssysteme - Teil 8: Erarbeiten von Spezifikationen fr Erstschutz und Instandsetzung (ISO 12944-8:2017) This European Standard was approved by CEN on 17 November 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulat

15、ions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

16、 This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN

17、members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po

18、rtugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CEN All rights of exploit

19、ation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12944-8:2017 EBS EN ISO 12944-8:2017EN ISO 12944-8:2017 (E) 3 European foreword This document (EN ISO 12944-8:2017) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes“ in collaborati

20、on with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2018, and conflicting national standards

21、 shall be withdrawn at the latest by June 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 12944-8:1998. Accordi

22、ng to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, G

23、reece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 12944-8:2017 has been approved by CEN as EN ISO 129

24、44-8:2017 without any modification. BS EN ISO 12944-8:2017ISO 12944-8:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 How to develop a specification for new work or maintenance 35 Contents of a specification 45.1 Supply . 4Annex A (informative) Basic i

25、nformation for inclusion in a protective paint system specification for new work and maintenance .12Annex B (informative) Reference areas 14Annex C (informative) Flow chart for planning new work17Annex D (informative) Flow chart for planning maintenance work .19Annex E (informative) Classification o

26、f environments Checklist (derived from ISO 129442) .20Annex F (informative) Recommended form for a protective paint system specification New work .22Annex G (informative) Recommended form for a protective paint system specification Maintenance .23Annex H (informative) Recommended form for a report o

27、n paint work progress and application conditions .25Annex I (informative) Recommended form for final report on corrosion protection work 27Annex J (informative) Recommended form for a detailed inspection report on the condition of an existing protective paint system, including the assessment of the

28、need for maintenance .30Bibliography .34 ISO 2017 All rights reserved iiiContents PageBS EN ISO 12944-8:2017ISO 12944-8:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Internatio

29、nal Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO

30、, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part

31、 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the el

32、ements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations recei

33、ved (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as

34、well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 14, Protective pa

35、int systems for steel structures.This second edition cancels and replaces the first edition (ISO 12944-8:1998), which has been technically revised.The main changes compared to the previous edition are as follows: the normative references have been updated; the terms and definitions have been updated

36、; water soluble contaminants and dust have been added in Table 1 as particular constraints with respect to surfaces and surface preparation; Annex E has been updated with regard to corrosivity classes; Annex I has been updated with regard to surface preparations; the bibliography has been updated; t

37、he text has been editorially revised.A list of all parts in the ISO 12944 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 12944-8:2017ISO 12944-8:2017(E)IntroductionUnprotected steel in the atmosphere, in water and in soil is subjected to corrosion that can lead to da

38、mage. Therefore, to avoid corrosion damage, steel structures are normally protected to withstand the corrosion stresses to which they will be subjected during the service life required of the structure.There are different ways of protecting steel structures from corrosion. ISO 12944 (all parts) deal

39、s with protection by paint systems and covers, in the various parts, all features that are important in achieving adequate corrosion protection. Additional or other measures are possible but require particular agreement between the interested parties.In order to ensure effective corrosion protection

40、 of steel structures, owners of such structures, planners, consultants, companies carrying out corrosion protection work, inspectors of protective coatings and manufacturers of coating materials need to have at their disposal state-of-the-art information in concise form on corrosion protection by pa

41、int systems. It is vital that such information is as complete as possible, unambiguous and easily understandable to avoid difficulties and misunderstandings between the parties concerned with the practical implementation of protection work.ISO 12944 (all parts) is intended to give this information i

42、n the form of a series of instructions. It is written for those who have some technical knowledge. It is also assumed that the user of ISO 12944 (all parts) is familiar with other relevant International Standards, in particular those dealing with surface preparation.Although ISO 12944 (all parts) do

43、es not deal with financial and contractual questions, attention is drawn to the fact that, because of the considerable implications of inadequate corrosion protection, non-compliance with requirements and recommendations given in ISO 12944 (all parts) can result in serious financial consequences.ISO

44、 12944-1 defines the overall scope of all parts of ISO 12944. It gives some basic terms and definitions and a general introduction to the other parts of ISO 12944. Furthermore, it includes a general statement on health, safety and environmental protection, and guidelines for using ISO 12944 for a gi

45、ven project.This document is intended as an aid when a corrosion protection specification is to be drawn up. ISO 2017 All rights reserved vBS EN ISO 12944-8:2017Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 8: Development of specifications for new wor

46、k and maintenance1 ScopeThis document covers the development of specifications for corrosion protection of steel structures using protective paint systems. It relates to new work and maintenance in the workshop or on site and is also applicable to the corrosion protection of individual components. T

47、his document covers the corrosion protection of steel structures exposed to different corrosion stresses by environments such as indoors, open-air and immersion in water or burial in soil, as well as special stresses, due for example, to medium or high temperatures. The need for different durability

48、 ranges is considered.Steel surfaces that have been hot-dip-galvanized, metal-sprayed, zinc-electroplated or sherardized, and previously painted steel surfaces, are also covered by this document.In this document, reference areas for assessing the quality of the corrosion protection work and the perf

49、ormance of the protective paint systems used are dealt with. This document provides detailed flow charts for planning new work and maintenance, which are taken into account when writing a specification.This document can also be used as a guide if extreme corrosion stresses or high temperatures occur, or if the protective paint systems are to be used on other substrates, such as non-ferrous metals or concrete, to define suitable specifications.2 Normative referencesThe following documents are referred to in the text in such a way that som