EN 62670-1-2014 en Photovoltaic concentrators (CPV) - Performance testing - Part 1 Standard conditions.pdf

《EN 62670-1-2014 en Photovoltaic concentrators (CPV) - Performance testing - Part 1 Standard conditions.pdf》由会员分享，可在线阅读，更多相关《EN 62670-1-2014 en Photovoltaic concentrators (CPV) - Performance testing - Part 1 Standard conditions.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPhotovoltaic concentrators(CPV) PerformancetestingPart 1: Standard conditionsBS EN 62670-1:2014National forewordThis British Standard is the UK implementation of EN 62670-1:2014. It isidentical to IEC 62670-1:2013.The UK participation in its preparation was entrusted to Tech

2、nicalCommittee GEL/82, Photovoltaic Energy Systems.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British S

3、tandards Institution 2015Published by BSI Standards Limited 2015.ISBN 978 0 580 74539 3ICS 27.160 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2015.A

4、mendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62670-1:2014EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 62670-1 May 2014 ICS 27.160 English Version Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions (IEC 62670-1:2013) Essai

5、 de performances des concentrateurs photovoltaques (CPV) - Partie 1: Conditions normales (CEI 62670-1:2013) Konzentrator-Photovoltaik (CPV)-Leistungsmessung - Part1: Standardprfbedingungen (IEC 62670-1:2013) This European Standard was approved by CENELEC on 2013-10-30. CENELEC members are bound to c

6、omply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENE

7、LEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre

8、 has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

9、Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektr

10、otechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62670-1:2014 E EN 62670-1:2014 - 2 - Foreword The text of document 82/734/CDV, future edition

11、1 of IEC 62670-1, prepared by IEC/TC 82 “Solar photovoltaic energy systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62670-1:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identic

12、al national standard or by endorsement (dop) 2014-11-23 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-30 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or

13、 CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62670-1:2013 was approved by CENELEC as a European Standard without any modification. BS EN 62670-1:2014- 3 - EN 62670-1:2014 Annex ZA (normative) Normative

14、 references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references,

15、the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed

16、in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60904-3 2008 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data EN 60904-3 2008 BS EN 62670-1:2014 2 62670-1 IEC:2013 CONTE

17、NTS INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Standard conditions . 6 BS EN 62670-1:201462670-1 IEC:2013 5 INTRODUCTION This International Standard series establishes IEC requirements for evaluating concentrator PV performance. It is written to be applicable to all concentrator PV techno

18、logies that have a geometric concentration ratio greater than 3X and require tracking. Included in the IEC 62670 series of standards are definitions of the standard conditions and methods to be used for assessing CPV performance. IEC 62670-1 defines a standard set of conditions so that power ratings

19、 noted on data sheets and nameplates will have a standard basis. IEC 62670-2 describes an on-sun, measurement-based method for determining the energy output and performance ratio for CPV arrays, assemblies and power plants. IEC 62670-3 describes methods for providing a CPV power assessment under the

20、 sets of standard conditions, enabling assessments both indoors and outdoors. BS EN 62670-1:2014 6 62670-1 IEC:2013 PHOTOVOLTAIC CONCENTRATORS (CPV) PERFORMANCE TESTING Part 1: Standard conditions 1 Scope This part of IEC 62670 defines standard conditions for assessing the power produced by CPV syst

21、ems and their photovoltaic subcomponents. The object of this part of IEC 62670 is to define a consistent set of conditions so that power ratings noted on data sheets and nameplates will have a standard basis. Two sets of conditions are included to characterize: a) operating conditions that represent

22、 on-sun performance relative to commonly measured meteorological conditions, and b) test conditions that represent performance when the module is in a readily reproducible environment. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document an

23、d are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60904-3, Photovoltaic devices Part 3: Measurement principles for terrestrial photovoltaic (PV)

24、solar devices with reference spectral irradiance data 3 Standard conditions Any power rating shall indicate the standard conditions used. a) CSOC (concentrator standard operating conditions) Irradiance: 900 Wm2direct normal irradiance. Temperature: 20 C ambient temperature. Wind speed: 2 ms1. Spectr

25、um: Direct normal AM1.5 spectral irradiance distribution consistent with conditions described in IEC 60904-3. b) CSTC (concentrator standard test conditions) Irradiance: 1 000 Wm2direct normal irradiance. Temperature: 25 C cell temperature. Spectrum: Direct normal AM1.5 spectral irradiance distribut

26、ion consistent with conditions described in IEC 60904-3. DNI (direct normal irradiance) is to be corrected for angle of incidence for devices using single-axis tracking. _ BS EN 62670-1:2014This page deliberately left blankBSI is the national body responsible for preparing British Standards and othe

27、r standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe brin

28、g together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process.

29、Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Serv

30、ices team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Sta

31、ndards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have ins

32、tant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both

33、 in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Me

34、mber and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is curren

35、t. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publi

36、cation please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standard

37、ization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying,

38、recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW