EN 62031-2008 en LED modules for general lighting - Safety specifications (Incorporates Amendment A2 2015)《普通照明用LED模块 安全规范》.pdf

《EN 62031-2008 en LED modules for general lighting - Safety specifications (Incorporates Amendment A2 2015)《普通照明用LED模块 安全规范》.pdf》由会员分享，可在线阅读，更多相关《EN 62031-2008 en LED modules for general lighting - Safety specifications (Incorporates Amendment A2 2015)《普通照明用LED模块 安全规范》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 62031:2008LED modules for general lighting Safety specificationsICS 29.140.99; 31.080.99 BS EN +A1:2013BS EN +A2:2015BS EN 62031:2008+A2:2015ISBN 978 0 580 78191 9Amendments/corrigenda issued since publicationDate Comments30 April 2013 Implementation of IEC amendment 1:2012 wit

2、h CENELEC endorsement A1:2013. Annex ZA updated.31 January 2015 Implementation of IEC amendment 2:2015 with CENELEC endorsement A2:2015. Annex ZA updatedThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2008 The British Standards Ins

3、titution 2015. Published by BSI Standards Limited 2015National forewordThis British Standard is the UK implementation of EN 62031:2008+A2:2015. It is identical to IEC 62031:2008, incorporating amendment 1:2012 and amendment 2:2015. It supersedes BS EN 62031:2008+A1:2013, which is withdrawn.The start

4、 and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by .The UK participation in its preparation was entrusted by Technical Committ

5、ee CPL/34, Lamps and Related Equipment, to Subcommittee CPL/34/1, Electric lamps.A list of organizations represented on this subcommittee can be obtained on request to its secretary.The publication does not purport to include all the necessary provisions of a contract. Users are responsible for its

6、correct application.Compliance with a British Standard cannot confer immunity from legal obligations.EUROPEAN STANDARD EN 62031NORME EUROPENNE EUROPISCHE NORMSeptember 2008CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation ElectrotechniqueEuropisches Komit

7、ee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 62031:2008 EICS 29.140.99; 31.080.99English versionLED modules for general lighting - Sa

8、fety specifications (IEC 62031:2008)Modules de DEL pour clairage gnral -Spcifications de scurit (CEI 62031:2008)LED-Module fr Allgemeinbeleuchtung -Sicherheitsanforderungen (IEC 62031:2008)This European Standard was approved by CENELEC on 2008-07-01. CENELEC members are bound to complywith the CEN/C

9、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any

10、 CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language and notifiedto the Central Secretariat has the same status as the official versio

11、ns.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slo

12、vakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.EN 62031:2008+A1February 2013EN 62031:2008+A2January 2015Foreword The text of document 34A/1237/FDIS, future edition 1 of IEC 62031, prepared by SC 34A, Lamps, ofIEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELE

13、C parallel vote and wasapproved by CENELEC as EN 62031 on 2008-07-01.The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identicalnational standard or by endorsement (dop) 2009-04-01 latest date by which the national standards conf

14、lictingwith the EN have to be withdrawn (dow) 2011-07-01NOTE In this standard, the following print types are used: Requirements proper: in roman type. Test specifications: in italic type. Explanatory matter: in smaller roman type. Annex ZA has been added by CENELEC._Endorsement noticeThe text of the

15、 International Standard IEC 62031:2008 was approved by CENELEC as a EuropeanStandard without any modification.In the official version, for Bibliography, the following notes have to be added for the standards indicated:IEC 60968 NOTE Harmonized as EN 60968:1990 (modified).IEC 62384 NOTE Harmonized as

16、 EN 62384:2006 (not modified)._ 2 BS EN 62031:2008EN 62031:2008/A1:2013 - 2 - Foreword The text of document 34A/1608/FDIS, future edition 1 of IEC 62031:2008/A1, prepared by SC 34A, “Lamps“, of IEC TC 34, “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CE

17、NELEC as EN 62031:2008/A1:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-09-03 latest date by which the national standards conflicting with the document have

18、to be withdrawn (dow) 2015-12-03 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Sa

19、fety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 62031:2008/A1:2012 was approved by CENELEC as a European Standard without any modification. Foreword The text of document 34A/1237

20、/FDIS, future edition 1 of IEC 62031, prepared by SC 34A, Lamps, ofIEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and wasapproved by CENELEC as EN 62031 on 2008-07-01.The following dates were fixed: latest date by which the EN has to be implemented at national

21、 level by publication of an identicalnational standard or y endorsement dop) 2009-04- latest date by which the national standards conflictingwith the EN have to be withdrawn (dow) 2011-07-01NOTE In this standard, the following print types are used: Requirements proper: in roman type. Test specificat

22、ions: in italic type. Explanatory matter: in smaller roman type. Annex ZA has been added by CENELEC._Endorsement noticeThe text of the International Standard IEC 62031:2008 was approved by CENELEC as a EuropeanStandard without any modification.In the official version, for Bibliography, the following

23、 notes have to be added for the standards indicated:IEC 60968 NOTE Harmonized as EN 60968:1990 (modified).IEC 62384 NOTE Harmonized as EN 62384:2006 (not modified)._ 2 BS EN 62031:2008Foreword The text of document 34A/1237/FDIS, future edition 1 of IEC 62031, prepared by SC 34A, Lamps, ofIEC TC 34,

24、Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and wasapproved by CENELEC as EN 62031 on 2008-07-01.The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identicalnational standard or by endorsement (dop)

25、 2009-04-01 latest date by which the national standards conflictingwith the EN have to be withdrawn (dow) 2011-07-01NOTE In this standard, the following print types are used: Requirements proper: in roman type. Test specifications: in italic type. Explanatory matter: in smaller roman type. Annex ZA

26、has been added by CENELEC._Endorsement noticeThe text of the International Standard IEC 62031:2008 was approved by CENELEC as a EuropeanStandard without any modification.In the official version, for Bibliography, the following notes have to be added for the standards indicated:IEC 60968 NOTE Harmoni

27、zed as EN 60968:1990 (modified).IEC 62384 NOTE Harmonized as EN 62384:2006 (not modified)._ 2 BS EN 62031:2008Foreword The text of document 34A/1237/FDIS, future edition 1 of IEC 62031, prepared by SC 34A, Lamps, ofIEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vot

28、e and wasapproved by CENELEC as EN 62031 on 2008-07-01.The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identicalnational standard or by endorsement (dop) 2009-04-01 latest date by which the national standards conflictingwith th

29、e EN have to be withdrawn (dow) 2011-07-01NOTE In this standard, the following print types are used:Requirements proper: in roman type.Test specifications: in italic type. Explanatory matter: in smaller roman type. Annex ZA has been added by CENELEC._Endorsement noticeThe text of the International S

30、tandard IEC 62031:2008 was approved by CENELEC as a EuropeanStandard without any modification.In the official version, for Bibliography, the following notes have to be added for the standards indicated:IEC 60968 NOTE Harmonized as EN 60968:1990 (modified).IEC 62384 NOTE Harmonized as EN 62384:2006 (

31、not modified)._ 2 BS EN 62031:2008Foreword The text of document 34A/1237/FDIS, future edition 1 of IEC 62031, prepared by SC 34A, Lamps, ofIEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and wasapproved by CENELEC as EN 62031 on 2008-07-01.The following dates w

32、ere fixed: latest date by which the EN has to be implemented at national level by publication of an identicalnational standard or by endorsement (dop) 2009-04-01 latest date by which the national standards conflictingwith the EN have to be withdrawn (dow) 2011-07-01NOTE In this standard, the followi

33、ng print types are used: Requirements proper: in roman type. Test specifications: in italic type. Explanatory matter: in smaller roman type. Annex ZA has been added by CENELEC._Endorsement noticeThe text of the International Standard IEC 62031:2008 was approved by CENELEC as a EuropeanStandard witho

34、ut any modification.In the official version, for Bibliography, the following notes have to be added for the standards indicated:I 60968 Har 0968:1990 (modified).62384 Har 2384:2006 (not modified)._ 2 BS EN 62031:2008EN 62031:2008/A1:2013 - 2 - Foreword The text document 34A/1608/FDIS, future edition

35、 1 of IEC 62031:2008/A1, prepared by SC 34A,“Lamps“, of IEC TC 34, “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62031:2008/A1:2013. The following dates are fixed: latest date by which the d cument has to be implemented at national level b

36、y publication of an identical national standard or by endorsement (dop) 2013-09-03 latest date by which the national standards conflicting ith the document have to be withdrawn (dow) 2015-12-03 Att ntion is drawn to the possibility that some of the elements of this document ma be the subject ofpaten

37、t rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of th

38、e International Standard IEC 62031:2008/A1:2012 was approved by CENELEC as a European Standard without any modification. EN 62031:2008/A1:2013 - 2 - Foreword The text of document 34A/1608/FDIS, future edition 1 of IEC 62031:2008/A1, prepared by SC 34A, “Lamps“, of IEC TC 34, “Lamps and related equip

39、ment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62031:2008/A1:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-09-03 latest d

40、ate by which the national standards conflicting with the document have to be withdrawn (dow) 2015-12-03 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all su

41、ch patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 62031:2008/A1:2012 was approved by CENELEC as a European St

42、andard without any modification. EN 62031:2008/A1:2013 - 2 - Foreword The text of document 34A/1608/FDIS, future edition 1 of IEC 62031:2008/A1, prepared by SC 34A, “Lamps“, of IEC TC 34, “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62031

43、:2008/A1:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-09-03 latest date by which the national t ds conflicting with the document have to be withdrawn (dow)

44、2015-12-03 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for El

45、ectrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 62031:2008/A1:2012 was approved by CENELEC as a European Standard without any modification. EN 62031:2008/A1:2013 - 2 - Foreword The text of document 34

46、A/1608/FDIS, future edition 1 of IEC 62031:2008/A1, prepared by SC 34A, “Lamps“, IEC TC 34, “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel voteand approved by CENELEC as EN 62031:2008/A1:2013. The following dates are fixed: latest date by which the document has to be impleme

47、nted at nati nal level by publication of an identical national standard or by endorsement (dop) 2013-09-03 latest date by which the national standards conflicting with the document have to be ithdrawn (dow) 2015-12-03 Attention is drawn to the possibility that some of the elements of this document m

48、ay be the subject of pat nt rights. CENELEC and/or CEN shall not be held responsible for identifying an or all such patentrights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 62031:2008/A1:2012 was approved by CENELEC as a European Standard without any modification. Foreword The text of document 34A/1237/FDIS, future edition 1 of IEC 62031, prepared by SC 34A, Lamps, ofIEC TC 34, Lamps and rel