EN 62002-2-2008 en Mobile and portable DVB-T H radio access - Part 2 Interface conformance testing《移动和便携式DVB-T H无线电通路 第2部分 接口一致性试验》.pdf

《EN 62002-2-2008 en Mobile and portable DVB-T H radio access - Part 2 Interface conformance testing《移动和便携式DVB-T H无线电通路 第2部分 接口一致性试验》.pdf》由会员分享，可在线阅读，更多相关《EN 62002-2-2008 en Mobile and portable DVB-T H radio access - Part 2 Interface conformance testing《移动和便携式DVB-T H无线电通路 第2部分 接口一致性试验》.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、Mobile and portable DVB-T/Hradio access Part 2: Interface conformance testingBS EN 62002-2:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsNational forewordThis British Standard is the UK implementation of EN 62002-2:2008. It

2、isidentical to IEC 62002-2:2008. It supersedes BS EN 62002-2:2006 which iswithdrawn.The UK participation in its preparation was entrusted to Technical CommitteeEPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can be obtained onrequest t

3、o its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 63691 2ICS 33.170Compliance with a British Standard cannot confer immunity fromlegal obligations.Amendments issued since p

4、ublicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62002-2:2008This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 March 2009EUROPEAN STANDARD EN 62002-2 NORME EUROPENNE EUROPISCHE NORM August 2008 CENELEC European Committee for Electro

5、technical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No

6、. EN 62002-2:2008 E ICS 33.170 Supersedes EN 62002-2:2006English version Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing (IEC 62002-2:2008) Accs radio DVB-T/H vers les mobiles et les portables - Partie 2: Contrles de conformit de linterface (CEI 62002-2:2008) Mobiler

7、 und tragbarer Funkzugang zu DVB-T/H - Teil 2: Konformittsprfung der Schnittstelle (IEC 62002-2:2008) This European Standard was approved by CENELEC on 2008-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European St

8、andard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in two official versions (English and

9、German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulg

10、aria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62002-2:2008E

11、N 62002-2:2008 2 Foreword The text of document 100/1290/CDV, future edition 2 of IEC 62002-2, prepared by IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62002-2 on 2008-06-01. This European Standard supe

12、rsedes EN 62002-2:2006. The main changes with respect to EN 62002-2:2006 are listed below: DVB-H has been included as a part of the main specification; all the performance figures have been revised as new simulation results have been made available as well as new reference receivers for DVB-H have b

13、een developed; DVB-H now includes all the different MPE-FEC code rates; new portable indoor and portable outdoor channel models have been included as well as performance figures for those; a new 2x TU-6 mobile SFN test channel has been included; a new L4 linearity pattern has been added; dedicated p

14、erformance figures for DVB-H for S1, S2, L1 to L4 interference patterns have been included; new GSM-interference measurement method has been added. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or

15、by endorsement (dop) 2009-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-06-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62002-2:2008 was approved by CENELEC as a European Standard wi

16、thout any modification. _ BS EN 62002-2:2008 3 EN 62002-2:2008 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only

17、the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year - -

18、 Digital Video Broadcasting (DVB): Framing structure, channel coding and modulation for digital terrestrial television ETSI EN 300 744 2007 IEC 62002-1 - 1)Mobile and portable DVB-T/H radio access - Part 1: Interface specification EN 62002-1 2008 2)ITU-R BT.1701-1 - 1)Charactistics of radiated signa

19、ls of conventional analogue television systems - - 1)Undated reference. 2)Valid edition at date of issue. BS EN 62002-2:2008 2 62002-2 IEC:2008(E) CONTENTS 1 Scope.8 2 Normative references .8 3 Abbreviations .8 4 Test conditions .10 4.1 General test conditions10 4.1.1 General .10 4.1.2 Temperature10

20、 4.1.3 Voltage11 4.2 Terminal categories and summarized measurement conditions .11 4.3 Required equipment 12 4.4 Reference model and test point .12 4.5 Degradation criteria and resynchronization13 4.6 Definition of C/N 15 4.7 Definition of measurement signals.15 4.7.1 Wanted DVB-T/H signal and inter

21、fering DVB-T signal definition.15 4.7.2 Interfering signal definitions.16 5 C/N performance 18 5.1 Definition and applicability.18 5.2 Minimum requirements 18 5.2.1 C/N performance in Gaussian channel .18 5.2.2 C/N performance in portable channel .19 5.2.3 C/N performance in portable indoor (PI) and

22、 portable outdoor (PO) channels19 5.2.4 C/N performance in mobile channels20 5.3 Test purpose .21 5.4 Method of test .22 5.4.1 Initial conditions 22 5.4.2 Measurement setup .22 5.4.3 Procedure23 5.5 Test requirement .23 6 Receiver minimum and maximum input signal levels.24 6.1 Definition and applica

23、bility.24 6.2 Minimum requirements 24 6.2.1 Minimum input levels .24 6.2.2 Maximum input levels for wanted signals .24 6.3 Test purpose .24 6.4 Method of test .24 6.4.1 Initial conditions 24 6.4.2 Measurement setup .25 6.4.3 Procedure25 6.5 Test requirement .25 7 Immunity to analogue and/or digital

24、signals in other channels.26 7.1 Definition and applicability.26 7.2 Minimum requirements 26 7.2.1 Immunity to pattern S1 26 BS EN 62002-2:200862002-2 IEC:2008(E) 3 7.2.2 Immunity to pattern S2 27 7.2.3 Immunity to pattern L1.27 7.2.4 Immunity to pattern L2.28 7.2.5 Immunity to pattern L3.28 7.2.6 I

25、mmunity to pattern L4.29 7.3 Test purpose .30 7.4 Method of test .30 7.4.1 Initial conditions 30 7.4.2 Measurement setup .34 7.4.3 Procedure35 7.5 Test requirement .35 8 Immunity to co-channel interference from analogue TV signals.35 8.1 Definition and applicability.35 8.2 Minimum requirements 35 8.

26、3 Test purpose .36 8.4 Method of test .36 8.4.1 Initial conditions 36 8.4.2 Measurement setup .36 8.4.3 Procedure37 8.5 Test requirement .37 9 Guard interval utilization: echoes within guard interval .37 9.1 Definition and applicability.37 9.2 Minimum requirements 37 9.3 Test purpose .37 9.4 Method

27、of test .37 9.4.1 Initial conditions 37 9.4.2 Measurement setup .38 9.4.3 Procedure38 9.5 Test requirement .39 10 Guard interval utilization: echoes outside the guard interval .39 10.1 Definition and applicability.39 10.2 Minimum requirements 39 10.3 Test purpose .40 10.4 Method of test .40 10.4.1 I

28、nitial conditions 40 10.4.2 Measurement setup .40 10.4.3 Procedure41 10.5 Test requirement .41 11 Tolerance to impulse interference.41 11.1 Definition and applicability.41 11.2 Minimum requirements 41 11.3 Test purpose .42 11.4 Method of test .42 11.4.1 Initial conditions 42 11.4.2 Measurement setup

29、 .42 11.4.3 Procedure43 11.5 Test requirement .43 12 GSM900 TX signal blocking test .43 BS EN 62002-2:2008 4 62002-2 IEC:2008(E) 12.1 Definition and applicability.43 12.2 Minimum requirements 44 12.2.1 Minimum input levels .44 12.3 Test purpose .44 12.4 Method of test .44 12.4.1 Initial conditions 4

30、4 12.4.2 Measurement setup .44 12.4.3 Procedure45 12.5 Test requirements .45 13 Mobile SFN channel test.45 13.1 Definition and applicability.45 13.2 Minimum requirements 45 13.3 Test purpose .47 13.4 Method of test .47 13.4.1 Initial conditions 47 13.4.2 Measurement setup .47 13.4.3 Procedure47 13.5

31、 Test requirements .48 Bibliography49 Figure 1 Reference model13 Figure 2 DVB-H measurement stream15 Figure 3 PAL interfering signals .17 Figure 4 SECAM L interfering signal 17 Figure 5 Example of a possible measurement setup in C/N performance tests .22 Figure 6 Example of a possible measurement se

32、tup in minimum and maximum receiver signal input level tests.25 Figure 7 Pattern S1: wanted DVB-T/H channel with N+1 or N1 analogue interferer.30 Figure 8 Pattern S2: wanted DVB-T/H channel with N + 1 or N 1 digital DVB-T interferer.31 Figure 9 Pattern L1: wanted DVB-T/H channel with one analogue si

33、gnal on N + 4 channel and one digital DVB-T signal on N + 2 channel 32 Figure 10 Pattern L2: wanted DVB-T/H channel with one analogue signal on N + 4 channel and another analogue signal on N + 2 channel.32 Figure 11 Pattern L3: Wanted DVB-T/H signal with one digital DVB-T signal on N + 4 channel and

34、 another digital DVB-T signal on N + 2 channel 33 Figure 12 Pattern L4: Wanted DVB-T/H signal with one analogue signal in C4/VHF III and one DVB-T signal in C21/UHF34 Figure 13 Example of a possible measurement setup to test the immunity to analogue and/or to digital signals in other channels 34 Fig

35、ure 14 Example of a possible measurement setup to test the immunity to co-channel interference from analogue TV signals.36 Figure 15 Example of possible measurement setup to test echoes within the guard interval .38 Figure 16 Echo outside guard interval mask.39 Figure 17 Example of a possible measur

36、ement setup to test echoes outside guard interval .40 Figure 18 Definition of the impulse interference test pattern.42 BS EN 62002-2:200862002-2 IEC:2008(E) 5 Figure 19 Example of a measurement setup to test impulse noise interference 43 Figure 20 Example of a measurement setup to test GSM900 TX sig

37、nal blocking 44 Figure 21 Example of a measurement setup in mobile SFN test.47 Table 1 Valid conformance measurements for different terminal categories .11 Table 2 Delta values between picture failure point and reference BER14 Table 3 DVB-H measurement streams .16 Table 4 C/N (dB) in Gaussian channe

38、l18 Table 5 DVB-H C/N (dB) for 5 % MFER in Gaussian channel18 Table 6 C/N (dB) in portable channel19 Table 7 C/N (dB) for 5 % MFER in portable channel .19 Table 8 C/N (dB) for 5 % ESR in PI Wideband noise source; 2 PAL/SECAM analogue TV-signal sources; Spectrum analyser; Channel simulator; RF-power

39、meter; Impulse noise source; MPEG-2 source; MPEG-2 decoder; DVB-H IP encapsulator; MPEG-2 TS player; Step attenuators, power dividers, cables and other standard RF-measurement accessories. 4.4 Reference model and test point The receiver performance is defined according to the reference model shown i

40、n Figure 1. BS EN 62002-2:200862002-2 IEC:2008(E) 13 DVB-TdemodulatorNoisefactorF InputpowerP in Antenna gain G a RF - reference point Field strength E Optional GSM reject filter L GSM Optional external antenna connector DVB-Htime slicingDVB-HMPE-FECDVB - H IP - De - encapsulation TS-referencepointI

41、P-outIP - referencepointOnly in DVB -H receiver FER-referencepointMFER - reference point IEC 653/08 Figure 1 Reference model The receiver performance figures are all specified at the reference point, which is the input of the receiver. All conformance testing is performed at the same point. In the c

42、ase where the GSM rejection filter is included (terminal category c), the measurements will be carried out in the front of the GSM rejection filter. In the case of a DVB-H receiver, the manufacturer shall provide the specified test mode in which the following parameters can be monitored: TS-BER afte

43、r Viterbi decoder, TS-PER, MPE FER (FER) (Frame Error Rate before MPE-FEC), MPE-FEC FER (MFER) (Frame Error rate after MPE-FEC). 4.5 Degradation criteria and resynchronization Four different degradation criteria are used. The criteria a and b are used in the non-mobile cases for DVB-T. Criterion c i

44、s for mobile reception in DVB-T and criterion d for DVB-H reception A receiver must be able to acquire a degraded signal and a resynchronization test must be done to ensure the C/N or C/I value is valid. Once the degradation criterion is achieved, all receiver input signals are removed for a period

45、of 5 seconds and then re-applied. The same degradation criterion must be achieved within a further 5 seconds. If that is not the case, then the only degradation criterion that can be used for receiver measurement has to be based upon successful signal acquisition. a) Reference BER, defined as BER =

46、2 104after Viterbi decoding. This corresponds to the quasi error free (QEF) criterion in the DVB-T standard, which states: ”less than one uncorrected error event per hour”. In the stationary reception cases, QEF is equivalent to the reference BER after Viterbi decoding. b) Picture failure point (PFP

47、). The picture failure point is defined as the C/N or C/I value when picture errors become visible. This is preferred if BER measurements are unstable or unavailable. A more objective definition can be made using the ESR5(5 % erroneous second ratio) criterion, which allows one erroneous second withi

48、n the 20 s observation period in the transport stream. Note that the reception quality is poor at picture failure point as one possible error BS EN 62002-2:2008 14 62002-2 IEC:2008(E) in each 20 s interval is too much for fixed TV-reception. The criterion is nevertheless suitable for measurements, a

49、nd a 1 dB to 2 dB carrier power increase will improve the reception quality to QEF level. A useful method to reduce the uncertainty of visual picture failure point is to use the two out of three method. Here 2 out of 3 consecutive 10 s periods must be good (no artefacts), i.e. 1 out of 3 can contain artefacts. More complex M out of N periods can lead to more accurate results but will in