EN 61987-13-2016 en Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13 Lists of properties (LOP) for Pressure Measu.pdf

《EN 61987-13-2016 en Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13 Lists of properties (LOP) for Pressure Measu.pdf》由会员分享，可在线阅读，更多相关《EN 61987-13-2016 en Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13 Lists of properties (LOP) for Pressure Measu.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、Industrial-process measurementand control Data structures and elements in process equipment cataloguesPart 13: Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchangeBS EN 61987-13:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Na

2、tional forewordThis British Standard is the UK implementation of EN 61987-13:2016. It isidentical to IEC 61987-13:2016.The UK participation in its preparation was entrusted to TechnicalCommittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizati

3、ons represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 9

4、78 0 580 79354 7ICS 25.040.40; 35.100.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2016.Amendments/corrigenda issued since publicationDate Text affect

5、edBRITISH STANDARDBS EN 61987-13:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61987-13 June 2016 ICS 25.040.40; 35.100.20 English Version Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Lists of properties (LOP) for Pre

6、ssure Measuring Equipment for electronic data exchange (IEC 61987-13:2016) Mesure et commande dans les processus industriels - lments et structures de donnes dans les catalogues dquipements de processus - Partie 13: Listes des proprits (LOP) pour les quipements de mesure de pression pour lchange lec

7、tronique de donnes (IEC 61987-13:2016) Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 13: Merkmalleisten (ML) fr Druckmessgerte fr den elektronischen Datenaustausch (IEC 61987-13:2016) This European Standard was approved by CENELEC on 2016-04-27.

8、CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained

9、on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the

10、 CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hun

11、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechni

12、que Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61987-13:2016 E BS EN 61987-13:2016EN 61987-13:2016 2 Europea

13、n foreword The text of document 65E/398/CDV, future edition 1 of IEC 61987-13, prepared by SC 65E “Devices and integration in enterprise systems” of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61987-1

14、3:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-01-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 20

15、19-04-27 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61987-13:2016 w

16、as approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60079-0:2011 NOTE Harmonized as EN 60079-0:2012. IEC 60947-5-6:1999 NOTE Harmonized as EN 60947-5-6:2000. IEC 61298

17、-1:2008 NOTE Harmonized as EN 61298-1:2008. IEC 61298-2:2008 NOTE Harmonized as EN 61298-2:2008. IEC 61298-3:2008 NOTE Harmonized as EN 61298-3:2008. IEC 61360-1 NOTE Harmonized as EN 61360-1. IEC 61360-2 NOTE Harmonized as EN 61360-2. IEC 61360-5 NOTE Harmonized as EN 61360-5. IEC 61784-1:2003 NOTE

18、 Harmonized as EN 61784-1:2004. IEC 61987-1 NOTE Harmonized as EN 61987-1. ISO 5167-2:2003 NOTE Harmonized as EN ISO 5167-2:2003. BS EN 61987-13:2016EN 61987-13:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following

19、 documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an Inter

20、national Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61360 series St

21、andard data elements types with associated classification scheme for electric items EN 61360 series IEC 61987-10 2009 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists of Properties (LOPs) for Industrial-Process Measurement and

22、 Control for Electronic Data Exchange - Fundamentals EN 61987-10 2009 - - + AC 2011 IEC 61987-11 2012 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: List of Properties (LOP) of measuring equipment for electronic data exchange - Ge

23、neric structures EN 61987-11 2012 BS EN 61987-13:2016 2 IEC 61987-13:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Terms and definitions 7 3.1 General . 7 3.2 Terms relating to measuring range 7 3.3 Terms relating to performance . 7 4 General . 9 4.1 Over

24、view. 9 4.2 Depiction of OLOPs and DLOPs 10 4.2.1 General . 10 4.2.2 Structural roles 10 4.2.3 Marking of polymorphic areas . 11 4.3 Examples of DLOP block usage . 13 4.3.1 Block “Digital communication” 13 4.3.2 Sub-block “Dial indicator” . 15 Annex A (normative) Operating list of properties for pre

25、ssure measuring equipment 18 Annex B (normative) Device lists of properties for pressure measuring equipment . 19 B.1 Absolute/gauge pressure transmitter 19 B.2 Differential pressure transmitter . 19 B.3 Absolute/gauge pressure gauge 19 B.4 Differential pressure gauge . 19 B.5 Remote seal 20 B.6 Man

26、ifold 20 Annex C (normative) Property library 21 Annex D (normative) Block library for considered device types 22 Bibliography . 23 Figure 1 Structure of a polymorphic area 11 Table 1 Example of structure of polymorphic areas in the DLOPs 12 Table 2 Example of structure of polymorphic areas in the O

27、LOP . 13 Table 3 Example for “Digital Communication” . 13 Table 4 Example for “Dial indicator” 15 BS EN 61987-13:2016IEC 61987-13:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES Part 1

28、3: Lists of properties (LOP) for pressure measuring equipment for electronic data exchange FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC

29、is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) a

30、nd Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with th

31、e IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly

32、 as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that s

33、ense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees u

34、ndertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any

35、attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edit

36、ion of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether dir

37、ect or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispens

38、able for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61987-13 h

39、as been prepared by subcommittee 65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation. The text of this standard is based on the following documents: CDV Report on voting 65E/398/CDV 65E/471/RVC Full information on

40、the voting for the approval of this standard can be found in the report on voting indicated in the above table. BS EN 61987-13:2016 4 IEC 61987-13:2016 IEC 2016 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61987, published under

41、the general title Industrial-process measurement and control Data structures and elements in process equipment catalogues, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website unde

42、r “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 61987-13:2016IEC 61987-13:2016 IEC 2016 5 INTRODUCTION The exchange of product data between companies, business sy

43、stems, engineering tools, data systems within companies and, in the future, control systems (electrical, measuring and control technology) can run smoothly only when both the information to be exchanged and the use of this information has been clearly defined. Prior to this standard, requirements on

44、 process control devices and systems were specified by customers in various ways when suppliers or manufacturers were asked to quote for suitable equipment. The suppliers in their turn described the devices according to their own documentation schemes, often using different terms, structures and med

45、ia (paper, databases, CDs, e-catalogues, etc.). The situation was similar in the planning and development process, with device information frequently being duplicated in a number of different information technology (IT) systems. Any method that is capable of recording all existing information only o

46、nce during the planning and ordering process and making it available for further processing, gives all parties involved an opportunity to concentrate on the essentials. A precondition for this is the standardization of both the descriptions of the objects and the exchange of information. This standa

47、rd series proposes a method for standardization which will help both suppliers and users of measuring equipment to optimize workflows both within their own companies and in their exchanges with other companies. Depending on their role in the process, engineering firms may be considered here to be ei

48、ther users or suppliers. The method specifies measuring equipment by means of blocks of properties. These blocks are compiled into lists of properties (LOPs), each of which describes a specific equipment (device) type. This standard series covers both properties that may be used in an inquiry or a p

49、roposal and detailed properties required for integration of the equipment in computer systems for other tasks. IEC 61987-10 defines structure elements for constructing lists of properties for electrical and process control equipment in order to facilitate automatic data exchange between any two computer systems in any possible workflow, for example engineering, maintenance or purchasing workflow and to allow both the customers and the suppliers of the equipment to optimize their processes