EN 61784-5-10-2012 en Industrial communication networks - Profiles - Part 5-10 Installation of fieldbuses - Installation profiles for CPF 10 (Incorporates Amendment A1 2015).pdf

《EN 61784-5-10-2012 en Industrial communication networks - Profiles - Part 5-10 Installation of fieldbuses - Installation profiles for CPF 10 (Incorporates Amendment A1 2015).pdf》由会员分享，可在线阅读，更多相关《EN 61784-5-10-2012 en Industrial communication networks - Profiles - Part 5-10 Installation of fieldbuses - Installation profiles for CPF 10 (Incorporates Amendment A1 2015).pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-10: Installation of fieldbuses Installation profiles for CPF 10BS EN 61784-5-10:2012BS EN 61784-5-10:2012+A1:2015BS EN 61784-5-10:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of

2、EN 61784-5-10:2012+A1:2015. It is identical to IEC 61784-5-10:2010, incorporating amendment 1:2015. It supersedes BS EN 61784-5-10:2012 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the n

3、umber of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee AMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this com

4、mittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 90355 7ICS 25.0

5、40.40; 35.100.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2012.Amendments/corrigenda issued since publicationDate Text affected31 October 2015 Imple

6、mentation of IEC amendment 1:2015 with CENELEC endorsement A1:2015. Annex ZA updatedEUROPEAN STANDARD EN 61784-5-10 NORME EUROPENNE EUROPISCHE NORM April 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektr

7、otechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-10:2012 E ICS 25.040.40; 35.100.40 Supersedes EN 61784-5-10:2008English version Industrial com

8、munication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10 (IEC 61784-5-10:2010) Rseaux de communication industriels - Profils - Partie 5-10: Installation des bus de terrain - Profils dinstallation pour CPF 10 (CEI 61784-5-10:2010) Industrielle Kommunik

9、ationsnetze - Profile - Teil 5-10: Feldbusinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 10 (IEC 61784-5-10:2010) This European Standard was approved by CENELEC on 2011-10-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co

10、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard

11、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the

12、 national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia

13、, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61784-5-10:2012BS EN 61784-5-10:2012+A1:2015EN 61784-5-10:2012+A1September 2015EN 61784-5-10:2012 - 2 - Foreword The text of document 65C/602/FDIS, future edition 2 of IEC 61784-5-10, prepared by SC 65C, “Industrial networks“, of IEC

14、/TC 65, “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-10:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical natio

15、nal standard or by endorsement (dop) 2012-10-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-10-19 This document supersedes EN 61784-5-10:2008. This standard is to be used in conjunction with IEC 61918, second edition (2010-07), together w

16、ith the European Common Modification published with EN 61918:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice

17、The text of the International Standard IEC 61784-5-10:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC/TR 61158-1 NOTE Harmonized as CLC/TR 61158-1. BS EN 61784-

18、5-10:2012EN 61784-5-10:2012 - 2 - Foreword The text of document 65C/602/FDIS, future edition 2 of IEC 61784-5-10, prepared by SC 65C, “Industrial networks“, of IEC/TC 65, “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC a

19、s EN 61784-5-10:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-10-20 latest date by which the national standards conflicting with the document have to be with

20、drawn (dow) 2014-10-19This document supersedes EN 61784-5-10:2008. This standard is to be used in conjunction with IEC 61918, second edition (2010-07), together with the European Common Modification published with EN 61918:2008. Attention is drawn to the possibility that some of the elements of this

21、 document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-10:2010 was approved by CENELEC as a European Standard without any modification. In the

22、 official version, for Bibliography, the following note has to be added for the standard indicated: IEC/TR 61158-1 NOTE Harmonized as CLC/TR 61158-1. BS EN 61784-5-10:2012EN 61784-5-10:2012 - 2 - Foreword The text of document 65C/602/FDIS, future edition 2 of IEC 61784-5-10, prepared by SC 65C, “Ind

23、ustrial networks“, of IEC/TC 65, “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-10:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publicat

24、ion of an identical national st d or by endorsement (dop) 2012-10-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-10-19 his document supersedes EN 61784-5-10:2008. This standard is to be used in conjunction with IEC 61918, second edition (

25、2010-07), together with the European Common Modification published with EN 61918:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights.

26、 Endorsement notice The text of the International Standard IEC 61784-5-10:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC/TR 61158-1 NOTE Harmonized as CLC/TR 6

27、1158-1. BS EN 61784-5-10:2012EN 61784-5-10:2012 - 2 - Foreword The text of document 65C/602/FDIS, future edition 2 of IEC 61784-5-10, prepared by SC 65C, “Industrial networks“, of IEC/TC 65, “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and a

28、pproved by CENELEC as EN 61784-5-10:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-10-20 latest date by which the national standards conflicting with the docu

29、ment have to be withdrawn (dow) 2014-10-19This document supersedes EN 61784-5-10:2008. This standard is to be used in conjunction with IEC 61918, second edition (2010-07), together with the European Common Modification published with EN 61918:2008. Attention is drawn to the possibility that some of

30、the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-10:2010 was approved by CENELEC as a European Standard without any

31、modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC/TR 61158-1 NOTE Harmonized as CLC/TR 61158-1. BS EN 61784-5-10:2012 2 BS EN 61784-5-10:2012+A1:2015EN 61784-5-10:2012+A1:2015EN 61784-5-10:2012/A1:2015 2 European foreword The

32、text of document 65C/768/CDV, future IEC 61784-5-10:2010/A1, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-10:2012/A1:2015. The following dates are fi

33、xed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-04-23 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-07-23 Attention is drawn to the

34、 possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-10:2010/A1:2015 was approved by CENELEC a

35、s a European Standard without any modification. EN 61784-5-10:2012/A1:2015 2 E opean foreword The text of document 65C/768/CDV, future IEC 61784-5-10:2010/A1, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENEL

36、EC parallel vote and approved by CENELEC as EN 61784-5-10:2012/A1:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-04-23 latest date by which the national stand

37、ards conflicting with the document have to be withdrawn (dow) 2018-07-23 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement n

38、otice The text of the International Standard IEC 61784-5-10:2010/A1:2015 was approved by CENELEC as a European Standard without any modification. EN 61784-5-10:2012/A1:2015 2 European foreword The text of document 65C/768/CDV, future IEC 61784-5-10:2010/A1, prepared by SC 65C “Industrial networks“ o

39、f IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-10:2012/A1:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an ide

40、ntical national standard or by endorsement (dop) 2016-04-23 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-07-23 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC an

41、d/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-10:2010/A1:2015 was approved by CENELEC as a European Standard without any modification. EN 61784-5-10:2012/A1:2015 2 European foreword The text

42、 of document 65C/768/CDV, future IEC 61784-5-10:2010/A1, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-10:2012/A1:2015. The following dates are fixed:

43、 latest dat by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-04-23 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-07-23 Att ntion is drawn to the poss

44、ibility that ome of the elements of this document may be the subject of ights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-10:2010/A1:2015 was approved by CENELEC as a European S

45、tandard without any modification. Foreword to amendment A1EN 61784-5-10:2012/A1:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and

46、are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod

47、), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year Replacement in Annex ZA of EN 61784-5-10:2012: IEC 61918 (mod) 2013 Industrial communication network

48、s - Installation of communication networks in industrial premises EN 61918 2013 - - + AC 2014 Addition to Annex ZA of EN 61784-5-10:2012: IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - EN 61784-5-10:2012/A1

49、:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the