EN 61340-4-3-2001 en Electrostatics Part 4-3 Standard Test Methods for Specific Applications - Footwear《静电 第4-3部分 对于专门用途的标准试验方法 鞋类 IEC 61340-4-3 2001》.pdf

《EN 61340-4-3-2001 en Electrostatics Part 4-3 Standard Test Methods for Specific Applications - Footwear《静电 第4-3部分 对于专门用途的标准试验方法 鞋类 IEC 61340-4-3 2001》.pdf》由会员分享，可在线阅读，更多相关《EN 61340-4-3-2001 en Electrostatics Part 4-3 Standard Test Methods for Specific Applications - Footwear《静电 第4-3部分 对于专门用途的标准试验方法 鞋类 IEC 61340-4-3 2001》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear The European Standard EN 61340-4-3:2001 has the status of a British Standard ICs 17.220.99; 29.020; 61.060 BS EN IEC 6 1 340-4-3: 20 O 2 61340-4-3:2001 BS EN 61340-4-3:2002 Amd. No. National forewo

2、rd Date Comments This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 7 February 2002 This British Standard is the official English language ve

3、rsion of EN 61340-4-3:2001. It is identical with IEC 61340-4-3:2001. The UK participation in its preparation was entrusted to Technical Committee GEL/101, Electrostatics, which has the responsibility to: - - aid enquirers to understand the text; present to the responsible European committee any enqu

4、iries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, a

5、ll IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Stand

6、ards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standar

7、d does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an

8、 inside front cover, the EN title page, pages 2 to 9, and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 7 February 2002 ISBN O 580 38940 5 EUROPEAN STANDARD EN 61340-4-3 NORME EUROPENNE EUROPISCHE NORM November 2001 ICs 17.220.99;

9、29.020; 61 .O60 English version Electrostatics Part 4-3: Standard test methods for specific applications - Footwear (IEC 61340-4-312001) Electrostatique Partie 4-3: Mthodes dessai normalises pour des applications spcifiques - Chaussures (CE1 61 340-4-312001) Elektrostatik Teil 4-3: Standard-Prfverfa

10、hren fr spezielle Anwendungen - Schuhwerk (IEC 61340-4-312001) This European Standard was approved by CENELEC on 2001-10-01. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard

11、 without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other l

12、anguage made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, Fra

13、nce, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Nor

14、mung Central Secretariat: rue de Stassart 35, B - 1050 Brussels O 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61340-4-3:2001 E Page 2 EN IS0 61340-4-32001 Foreword The text of document 101/123/FDIS, future edition 1 of IE

15、C 61340-4-3, prepared by IEC TC 101 “Electrostatics“, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61 340-4-3 on 2001-1 0-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical natio

16、nal standard or by endorsement - latest date by which the national standards conflicting with the EN have to be withdrawn Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. (d0P) 2002-07-01 (daw) 2004-1 0-

17、01 Endorse ment not ice The text of the International Standard IEC 61340-4-3:2001 was approved by CENELEC as a European Standard without any modification. O BSI 7 February 2002 Page 3 EN IS0 61340-4-32001 I NTRO DU CTIO N Footwear, especially shoes, have become an important electrostatic control dev

18、ice in all areas, but particularly in electronics manufacturing. Standards exist from various national committees and these have served as guidance in the preparation of this first International Standard for electrostatic control footwear. Control of unwanted electrostatic charge is of particular im

19、portance where personnel work around electrostatic-sensitive processes, materials or items. In many cases, devices such as wrist straps or other devices are employed to provide an electrical bond between a persons skin and a ground connection. Many instances exist in industry where wrist straps or o

20、ther tethering devices cannot be safely or conveniently applied, but there is still a need to provide a ground connection for personnel. A convenient method to provide a ground connection for personnel is through their feet while standing or walking on a defined and properly specified electrostatic

21、control floor surface. The measurement method described in this part of IEC 61340 can be used to monitor electrical specifications of footwear during manufacture, prior to selection by an end user or periodically during use. The method described involves the use of a specific set of test equipment a

22、nd instruments. Other equipment and instruments may be used to measure the parameters specified, but in the event of any dispute, the equipment, instruments and measurement method established in this standard apply. O BSI 7 February 2002 Page 4 EN IS0 61340-4-32001 ELECTROSTATICS - Part 4-3: Standar

23、d test methods for specific applications - Footwear 1 Scope This part of IEC 61340 describes a test method for determining the electrical resistance of footwear used in the control of electrostatic potential on people. This standard is suitable for use by the manufacturer of footwear as well as the

24、end user. A method for measuring the electrical resistance of footwear alone is described and serves as an acceptance test for new footwear. NOTE Although this standard does not include requirements for personal safety, attention is drawn to the need for all concerned to comply with the relevant loc

25、al statutory requirements regarding the health and safety of all persons in all places of work that use footwear defined by the test method of this standard. Insulating footwear is not included within the scope of this standard although the electrical resistance measurement techniques may be applica

26、ble. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61 340-2-3:2000,

27、Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation 3 Definitions For the purpose of this part of IEC 61340, the following definitions apply. 3.1 footwear shoes, slippers or booties NOTE T

28、wo types of footwear exist, see 3.2 and 3.3. 3.2 electrostatic conductive footwear footwear as tested by the method described in this standard with an electrical resistance of ditionS. t is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone fi

29、nding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service ca

30、lled PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be sddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersabsi-. Sta

31、ndards are also svailable from the BSI website at http:/www.bsi-. in response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide rang

32、e of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996

33、7111. Fax: +44 (0)20 8996 7048. Email: infoabsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax:

34、 +44 (0)20 8996 7001. Email: membershipabsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BS

35、I also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopyi

36、ng, recording or otherwise - without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightabsi-.