EN 60896-21-2004 en Stationary lead-acid batteries Part 21 Valve regulated types C Methods of test《固定式铅酸蓄电池 第21部分 阀门调节型 试验方法 IEC 60896-21-2004 替代 EN 60896-2-1996》.pdf

《EN 60896-21-2004 en Stationary lead-acid batteries Part 21 Valve regulated types C Methods of test《固定式铅酸蓄电池 第21部分 阀门调节型 试验方法 IEC 60896-21-2004 替代 EN 60896-2-1996》.pdf》由会员分享，可在线阅读，更多相关《EN 60896-21-2004 en Stationary lead-acid batteries Part 21 Valve regulated types C Methods of test《固定式铅酸蓄电池 第21部分 阀门调节型 试验方法 IEC 60896-21-2004 替代 EN 60896-2-1996》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60896-21:2004 Stationary lead-acid batteries Part 21: Valve regulated types Methods of test ICS 29.220.20 Incorporating corrigendum August 2009National foreword This British Standard is the UK implementation of EN 60896-21:2004. It is identical with IEC 60896-21:2004. It super

2、sedes BS EN 60896-2:1996 which is withdrawn. Together with BS EN 60896-22:2004 it supersedes BS 6290-4:1997 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PEL/21, Secondary cells and batteries. A list of organizations represented on this committee ca

3、n be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 60896-21:2004 This British St

4、andard was published under the authority of the Standards Policy and Strategy Committee on 11 March 2005 BSI 2009 Amendments/corrigenda issued since publication Date Comments 31 August 2009 Supersession details amendment in National foreword ISBN 978 0 580 68006 9EUROPEANSTANDARD EN6089621 NORMEEURO

5、PENNE EUROPISCHENORM March2004 CENELEC EuropeanCommitteeforElectrotechnicalStandardization ComitEuropendeNormalisationElectrotechnique EuropischesKomiteefrElektrotechnischeNormung CentralSecretariat:ruedeStassart35,B1050Brussels 2004CENELEC Allrightsofexploitationinanyformandbyanymeansreservedworldw

6、ideforCENELECmembers. Ref.No.EN6089621:2004E ICS29.220.20 SupersedesEN608962:1996 Englishversion Stationaryleadacidbatteries Part21:Valveregulatedtypes Methodsoftest (IEC6089621:2004) Batteriesstationnairesauplomb Partie21:Typestanchessoupapes Mthodesdessais (CEI6089621:2004) OrtsfesteBleiAkkumulato

7、ren Teil21:VerschlosseneBauarten Prfverfahren (IEC6089621:2004) ThisEuropeanStandardwasapprovedbyCENELECon20040301.CENELECmembersareboundto complywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEuropean Standardthestatusofanationalstandardwithoutanyalteration. Uptodateli

8、stsandbibliographicalreferencesconcerningsuchnationalstandardsmaybeobtainedon applicationtotheCentralSecretariatortoanyCENELECmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyother languagemadebytranslationundertheresponsibilityofaCENELECmemberintoitsownl

9、anguageand notifiedtotheCentralSecretariathasthesamestatusastheofficialversions. CENELECmembersarethenationalelectrotechnicalcommitteesofAustria,Belgium,Cyprus,Czech Republic,Denmark,Estonia,Finland,France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia, Lithuania,Luxembourg,Malta,Netherlands,No

10、rway,Poland,Portugal,Slovakia,Slovenia,Spain,Sweden, SwitzerlandandUnitedKingdom. Foreword The text of document 21/594/FDIS, future edition 1 of IEC6089621, prepared by IECTC21, Secondarycellsandbatteries,wassubmittedtotheIECCENELECparallelvoteandwasapprovedby CENELECasEN6089621on20040301. ThisEurop

11、eanStandardsupersedesEN608962:1996. Thefollowingdateswerefixed: latestdatebywhichtheENhastobeimplemented atnationallevelbypublicationofanidentical nationalstandardorbyendorsement (dop)20041201 latestdatebywhichthenationalstandardsconflicting withtheENhavetobewithdrawn (dow)20070301 AnnexZAhasbeenadd

12、edbyCENELEC. _ Endorsementnotice ThetextoftheInternationalStandardIEC6089621:2004wasapprovedbyCENELECasaEuropean Standardwithoutanymodification. Intheofficialversion,forBibliography,thefollowingnoteshavetobeaddedforthestandardsindicated: IEC60050826 NOTE HarmonizedasHD384.2S1:1986(notmodified). IEC6

13、0095 NOTE HarmonizedinEN60095series(partlymodified). IEC61056 NOTE HarmonizedinEN61056series(notmodified). IEC61427 NOTE HarmonizedasEN61427:2001(notmodified). ISO9000 NOTE HarmonizedasENISO9000:2000(notmodified). ISO9001 NOTE HarmonizedasENISO9001:1994(notmodified). ISO9001 NOTE HarmonizedasENISO90

14、01:2000(notmodified). _ EN6089621:2004 BS EN 60896-21:2004 Page 2CONTENTS 1 Scope.4 2 Normative references .4 3 Definitions 4 4 Functional characteristics.10 5 Test set-up.12 6 Test methods .16 Annex ZA (normative) Normative references to international publications with their corresponding European

15、publications .40 Bibliography39 Figure 1 Suggested layout for the test16 Figure 2 Typical test circuit 20 Figure 3 Test fixture (IEC 61430) .21 Figure 4 Orientation of the cell or monobloc battery in the test.22 Figure 5 Suggested test circuit (fuse protected d.c. source) for the evaluation of groun

16、d short propensity 22 Figure 6 U-shaped tubing for the detection of gas flow through the valve.25 Figure 7 Top view of the arrangement for monobloc batteries and single cells .34 Figure 8 Top view of the arrangement for front-access monobloc batteries 35 Figure 9 Impact locations.38 Figure 10 Config

17、uration for the shortest edge drop test.38 Figure 11 Configuration for the corner drop test38 Table 1 Safe operation characteristics .11 Table 2 Performance characteristics 11 Table 3 Durability characteristics .12 Table 4 Safe operation characteristics .15 Table 5 Performance characteristics 15 Tab

18、le 6 Durability characteristics .15 Table 7 Spark test according to IEC 61430 (for a venting system only) 21 Table 8 Final voltage de-rating factor in commissioning or acceptance test27 Table 9 List of results of float service with daily discharges .29 Table 10 Summary of results of float service wi

19、th daily discharges 30 Table 11 Data report36 EN6089621:2004 BS EN 60896-21:2004 Page 3 1 Scope This part of IEC 60896 applies to all stationary lead-acid cells and monobloc batteries of the valve regulated type for float charge applications, (i.e. permanently connected to a load and to a d.c. power

20、 supply), in a static location (i.e. not generally intended to be moved from place to place) and incorporated into stationary equipment or installed in battery rooms for use in telecom, uninterruptible power supply (UPS), utility switching, emergency power or similar applications. The objective of t

21、his part of IEC 60896 is to specify the methods of test for all types and construction of valve regulated stationary lead acid cells and monobloc batteries used in standby power applications. This part of IEC 60896 does not apply to lead-acid cells and monobloc batteries used for vehicle engine star

22、ting applications (IEC 60095 series), solar photovoltaic energy systems (IEC 61427), or general purpose applications (IEC 61056 series). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited appl

23、ies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-32:1975, Basic environmental testing procedures Part 2: Test; Test Ed: Free fall Amendment 2 (1990) IEC 60695-11-10, Fire hazard testing Part 11-10 Test flames 50 W horizontal a

24、nd vertical flame test methods IEC 60707, Flammability of solid non-metallic materials when exposed to flame sources List of test methods IEC 60896-22:2004, Stationary lead acid batteries Part 22: Valve regulated types Requirements IEC 60950-1:2001, Information technology equipment Safety Part 1: Ge

25、neral requirements IEC 61430:1997, Secondary cells and batteries Test methods for checking the performance of devices designed for reducing explosion hazards Lead-acid starter batteries ISO 1043-1, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics 3 Defi

26、nitions For the purpose of this part of IEC 60896, the following definitions apply: EN6089621:2004 BS EN 60896-21:2004 Page 43.1 accuracy (of a measuring instrument) quality which characterizes the ability of a measuring instrument to provide an indicated value close to a true value of the measurand

27、 IEV 311-06-08 NOTE Accuracy is all the better when the indicated value is closer to the corresponding true value. 3.2 accuracy class category of measuring instruments, all of which are intended to comply with a set of specifications regarding uncertainty IEV 311-06-09 3.3 ambient temperature temper

28、ature of the medium in the immediate vicinity of a cell or battery IEV 486-03-12 3.4 ampere-hour quantity of electricity or a capacity of a battery obtained by integrating the discharge current in ampere with respect to time in hours. NOTE One ampere-hour equals 3 600 coulombs. 3.5 secondary battery

29、 two or more secondary cells connected together and used as a source of electrical energy IEV 486-01-03 3.6 monobloc battery secondary battery in which the plate packs are fitted in a multi-compartment container IEV 486-01-17 3.7 floating battery secondary battery whose terminals are permanently con

30、nected to a source of constant voltage sufficient to maintain the battery approximately fully charged, intended to supply a circuit, if the normal supply is temporarily interrupted IEV 486-04-10 EN6089621:2004 BS EN 60896-21:2004 Page 53.8 battery capacity quantity of electricity or electrical charg

31、e, which a fully charged battery can deliver under specified conditions IEV 486-03-01 NOTE The SI unit for electric charge is the coulomb (1 C = 1 A.s) but in practice, battery capacity is expressed in ampere-hours (Ah). 3.9 charge operation during which a secondary battery receives from an external

32、 circuit electrical energy, which is converted into chemical energy IEV 486-01-11 NOTE A charge is defined by its maximum voltage, current and duration. 3.10 full charge state where all the available active material of a secondary cell or battery has been reconverted to its fully charged status IEV

33、486-03-37 3.11 overcharge continued charging after the full charge of a secondary cell or battery IEV 486-03-35 3.12 cell assembly of electrodes and electrolyte, which constitutes the basic unit of a secondary battery IEV 486-01-02 3.13 electrochemical cell electrochemical system capable of storing

34、in chemical form the electric energy received and which can give it back by reconversion, i.e. a secondary cell IEV 486-01-01, modified 3.14 secondary cell assembly of electrodes and electrolyte which constitutes the basic unit of a secondary battery IEV 486-01-02 3.15 valve regulated cell secondary

35、 cell which is closed under normal conditions but which has an arrangement which allows the escape of gas if the internal pressure exceeds a predetermined value. The cell cannot normally receive the addition of electrolyte IEV 486-01-20 EN6089621:2004 BS EN 60896-21:2004 Page 6NOTE Such cells have a

36、n immobilized electrolyte to prevent spillage and allow for oxygen recombination on the negative electrode. 3.16 actual capacity C a quantity of electricity delivered by a cell or battery, determined experimentally with a discharge at a specified rate to a specified end-voltage and at a specified te

37、mperature NOTE This value is usually expressed in ampere-hours (Ah). 3.17 nominal capacity C n suitable approximate quantity of electricity used to identify the capacity of a cell or battery NOTE This value is usually expressed in ampere-hours (Ah). IEV 486-03-021 3.18 rated capacity C rt quantity o

38、f electricity, declared by the manufacturer, which a cell or battery can deliver under specified conditions after a full charge NOTE This value is usually expressed in ampere-hours (Ah). IEV 486-03-22 3.19 shipping capacity C sh quantity of electricity, declared by the manufacturer, which a cell or

39、battery can deliver, at the time of shipment, under specified conditions of charge. NOTE 1 This value is usually expressed in ampere-hours (Ah). NOTE 2 In the present standard this value is assumed to be at least 0,95 C rt . 3.20 durability ability of an item (battery) to perform a required function

40、 under given conditions of use and maintenance, until a limiting state is reached NOTE A limiting state of an item (battery) may be characterized by the end of the useful life, unsuitability for any economic or technological reasons or other relevant factors. IEV 191-02-02 3.21 electrolyte solid or

41、liquid phase containing mobile ions that render the phase electrically conducting IEV 486-02-19 EN6089621:2004 BS EN 60896-21:2004 Page 73.22 stationary equipment either fixed equipment or equipment not provided with a carrying handle and having such a mass that it cannot easily be moved IEV 826-07-

42、06 3.23 failure termination of the ability of an item (battery) to perform the required function IEV 603-035-06 3.24 lead-acid battery secondary battery in which the electrodes are made mainly from lead and the electrolyte is a sulphuric acid solution IEV 486-01-04 3.25 design life expected period o

43、f useful life of a battery according to components, design and application 3.26 service life period of useful life of a battery under specified conditions IEV 486-03-23 3.27 useful life under given conditions, the time interval beginning at a certain instant of time, and ending when the failure inte

44、nsity becomes unacceptable or when the item (battery) is considered un- repairable as a result of a fault IEV 191-10-06 3.28 performance characteristics defining the ability of a battery to achieve its intended functions IEV 311-06-11 3.29 product range range of products, i.e. cells or monobloc batt

45、eries, over which specified design features, materials, manufacturing processes, and quality systems (e.g. ISO 9000) of manufacturing locations are identical NOTE This definition guides the selection of the units to be tested in the framework of this standard. EN6089621:2004 BS EN 60896-21:2004 Page

46、 83.30 accelerated test test in which the applied stress level is chosen to exceed that stated in the reference conditions in order to shorten the time duration required to observe the stress response of the item (battery), or to magnify the response in a given time duration NOTE To be valid, an acc

47、elerated test shall not alter (or conceal) the basic fault modes and failure mechanisms, or their relative prevalence. IEV 191-14-07 3.31 acceptance test contractual test to prove to the customer that the device (battery) meets certain conditions of its specification IEV 151-16-23 3.32 commissioning test tests applied on a device (battery) car